Closed

Enclosure/Cabinet Design in Mechanical CAD - open to bidding

The attached cabinet picture1 shows the similar cabinet/enclosure to be designed.

This cabinet is for a display application. It shall be designed considering mobile installation (vehicle).

Material is Aluminium

Cabinet Size is 1900mm Length * 780mm Height * 60mm Width

This cabinet consists of many submodules arranged in array of 4 rows 11 columns.

11 submodules in each row-------(Length)

4 submodules in each column----(Height)

submodule size is {160mm length * 160mm height (square) * 16mm width}

*This submodule diagram is attached as submodule dimension.

The frame for fixing submodules shall be like the attached picture named frame1.

This frame shall be detachable. Such that once the submodules are arranged and fixed on the frame, the frame can be mounted inside the cabinet.

The mounting holes on this frame for fixing the submodules and the frame structure shall be like in the attached picture named frame2

The actual display area will be 1760mm * 640mm.

1900mm-1760mm = 140mm shall be used for cabinet edge.

780mm-640mm = 140mm shall be used for cabinet edge.

The cabinet shall be waterproof.

The cabinet shall contain DC fans for cooling (DC fans are mintature type)

The cabinet front side is the display which shall be framed with acrylic sheet.

Front Acrylic sheet 4mm thickness.

Gap/space between Acrylic sheet surface and submodule surface = 2mm only.

the acrylic sheet shall be mounted/fixed with a gasket from inside the cabinet such that the gasket is not visible outside the cabinet.

The cabinet back side is the door which shall be fixed with a pair of gas spring.

The cabinet door shall be fixed with gasket at the edges for waterproof.

This cabinet internally consists of some power supply units and some printed circuit boards, provisions for mounting these shall be provided.

Dimensions of power supply units and printed circuit boards will be given later.

Skills: CAD/CAM

See more: mobile gas, dimension design, design boards, dc design, acrylic design, 42 design square, edge cam, mechanical design & cad, SURFACE DESIGN, enclosure, dc to dc, Cooling, acrylic, picture cad, shows cam, spring design, outside inside design, cad enclosure, Printed Circuit, power cad

About the Employer:
( 0 reviews ) India

Project ID: #7016140

3 freelancers are bidding on average $170 for this job

abhijitbhoyar

A proposal has not yet been provided

$166 USD in 15 days
(0 Reviews)
0.0
filipeferreira92

Ainda não foi fornecida uma proposta

$166 USD in 3 days
(0 Reviews)
0.0
robaitan

I'm an industrial designer/graphic artist with years of experience in 2d drafting and 3d modeling - architectural, product design and concept visualization. I use AutoCAD, Revit Architecture, Blender 3D and Adobe Photo More

$177 USD in 3 days
(0 Reviews)
0.0