
Closed
Posted
Paid on delivery
# Request for Complete Micro-Robot Engineering Design & Manufacturing Files **Project:** Big Hero 6-Inspired Modular Micro-Robot **Maximum Total Budget:** KRW 500,000 (approximately USD 350–370, depending on exchange rates) Hello, I am looking for an experienced robotics, mechanical, and electronics engineer to design a fully functional miniature modular robot inspired by the microbots featured in the movie *Big Hero 6*. I am not looking for a concept design or visual 3D model only. I need a complete, manufacturable engineering package that can be sent directly to PCB manufacturers and mechanical fabrication companies. My goal is to manufacture **as many fully functional robots as possible within a total budget of KRW 500,000**, including engineering design, components, manufacturing, and charging equipment. ## 1. Robot Design The robot should have: - A small, approximately spherical central body. - Two elongated wing-shaped arms extending from opposite sides. - A compact, lightweight design. - An optimized internal arrangement for the battery, PCB, motors, sensors, and mechanical components. - The smallest practical dimensions without compromising the required functionality. Please recommend the minimum feasible size based on actual component dimensions and mechanical constraints. ## 2. Required Functions **A. Independently Controlled Arms** - Two independently controlled robotic arms. - Adjustable arm angles and positioning. - Two-axis directional movement per arm, if mechanically feasible. - A target of 360-degree rotational capability, subject to mechanical limitations. - Ability to stop and hold the arms at commanded positions. - Independent motor control through software. **B. Forward and Backward Movement** - A compact internal rotating-mass or reaction-wheel-based movement mechanism. - The robot should be capable of moving or rolling forward and backward. - Please evaluate whether the proposed movement mechanism is physically feasible. - If necessary, recommend a more practical movement mechanism while preserving the intended external appearance. **C. Robot-to-Robot Connection and Separation** - Multiple robots must be capable of physically connecting. - The robots should also be capable of separating. - Connection points should be considered at the central body and arm tips. - Support for different connection configurations, including straight-line and T-shaped arrangements. - Electrically controlled docking and release mechanisms are preferred. **D. Relative Position Detection** - Robots should be able to detect or estimate the relative positions of nearby robots. - Distance and orientation estimation for docking. - Appropriate sensors and wireless communication systems. - Please explain the achievable accuracy and limitations. **E. Charging System — Mandatory Specification** The charging method must use **2-pin Pogo Pin spring-contact charging**. Requirements: - Internal rechargeable Li-Po battery. - Dedicated charging dock with Pogo Pin contacts. - Automatic electrical charging connection when the robot is placed correctly on the dock. - Integrated charging and battery protection circuitry. - Battery status monitoring. - Reverse-polarity protection or mechanically keyed contacts. - No USB-C charging port on the robot itself. The charging dock must also be included in the engineering design package, including PCB, CAD, STEP/STL, Gerber files, and manufacturing documentation. **F. Bluetooth and Computer Connectivity** - Bluetooth communication with a PC. - Wireless control of individual robots. - Independent arm movement control. - Forward and backward movement commands. - Communication with multiple robots. - Real-time transmission of sensor readings and robot status. **G. Programming and Real-Time Control** - Programmable microcontroller. - Firmware source code. - Python-based PC control interface or equivalent. - Real-time motor control. - Live sensor data monitoring. - Battery status and connection monitoring. - Documented communication protocol. - Ability to send commands to individual robots. ## 3. Required Engineering Deliverables **PCB and Electronics** - Complete circuit schematic. - Editable PCB design files. - Gerber and drill files. - Bill of Materials (BOM). - Pick-and-place files. - PCB assembly documentation. - Battery charging and protection circuits. - Motor driver and wireless communication circuitry. **Mechanical Engineering and CAD** - Complete parametric 3D CAD model. - Editable native CAD source files. - STEP and STL files. - Individual mechanical part drawings. - Manufacturing tolerances and dimensions. - Complete assembly and exploded views. - Arm joint mechanisms. - Movement mechanism. - Robot docking and separation mechanism. - Mechanical interference and clearance analysis. **Component Procurement** Please provide a complete component list containing: - Exact manufacturer part numbers. - Supplier purchase links. - Quantity per robot. - Individual and total component costs. - Physical dimensions and relevant specifications. - Current stock availability and expected lead times. - Suitable alternative parts in case of shortages. Please prioritize components that are readily available and not discontinued. **Software** - Complete microcontroller firmware. - PC control software. - Bluetooth communication implementation. - Real-time control and monitoring functionality. - Source code and installation instructions. ## 4. Manufacturing and Engineering Validation All deliverables must be suitable for real-world manufacturing rather than visualization alone. Please evaluate: - PCB manufacturability and assembly. - Internal component placement and clearances. - Motor torque and power requirements. - Battery capacity and estimated operating time. - Joint movement limitations. - Physical feasibility of the rolling mechanism. - Docking mechanism feasibility. - Expected manufacturing cost. - Mechanical and electrical integration. Please clearly distinguish between simulated or analytically validated features and features that have been physically tested. ## 5. Budget Optimization and Maximum Production Quantity **The absolute total budget limit is KRW 500,000.** This budget must include: - Engineering and design fees. - PCB fabrication and assembly. - Electronic components. - Mechanical manufacturing. - Charging dock. - Other essential manufacturing expenses. My priority is to produce **the maximum possible number of fully functional, identical robots within this budget**. Please: 1. Minimize the manufacturing cost per robot without removing essential functions. 2. Use standardized PCB and mechanical designs suitable for multiple units. 3. Consider PCB panelization, bulk component purchasing, and economical fabrication methods. 4. Calculate the actual estimated manufacturing cost per robot. 5. Provide cost comparisons for manufacturing 1, 3, 5, and 10 robots. 6. Calculate the maximum number of robots that can be manufactured within the total budget. 7. Ensure all robots can communicate and physically connect with one another. 8. Include the charging dock and engineering fees in the total budget. If the full requirements cannot realistically be achieved within the budget, please explain the technical limitations and provide a cost breakdown before proposing any changes. **Please do not remove or downgrade mandatory features without my approval.** ## 6. Final Delivery Requirements The final package should contain all editable design files, manufacturing files, firmware, software, BOM, assembly instructions, and technical documentation. The files should be suitable for submission to PCB fabrication and assembly services and mechanical manufacturing companies without requiring major redesign. I would also like ownership and modification rights to the final custom design deliverables, subject to agreement. ## 7. Questions Before Starting Please let me know: 1. Can you realistically design this robot with the requested functions? 2. What is the smallest practical robot size? 3. How much would the engineering work cost? 4. What is the estimated manufacturing cost per robot? 5. How many robots could be manufactured within KRW 500,000, including all expenses? 6. How long would the design process take? 7. Which manufacturing-ready files will you deliver? 8. Will design corrections be included if the manufacturer identifies fabrication issues? I am looking for a practical, cost-optimized, fully manufacturable design rather than a conceptual model. Thank you. I look forward to discussing the feasibility, timeline, and quotation.
Project ID: 40760951
25 proposals
Remote project
Active 5 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
25 freelancers are bidding on average $125 USD for this job

Hello, i am ready exited to work you as i read your job description I am also an expert in making 2d,3d modelling and animating characters 2dautocad drawing ,elevation, solid work, Revit ,FBX ,Unity, Render also interior and exterior design. I have experience in field of more than 10+ years. I can Create Intro and Explainer Videos. for products and companies. Kindly check My Portfolio as well. Hope for your very soon reply. Thank you
$120 USD in 2 days
7.9
7.9

As an experienced 3D Artist, Engineer, and AI-driven content creator, I’m confident in my ability to bring your vision for a fully functional micro-robot inspired by *Big Hero 6* to life. My years of experience in **mechanical and electronics engineering**, alongside my proficiency with tools like ChatGPT and Midjourney, enable me to deliver innovative designs that are both functional and manufacturable. I understand how important it is to not just create a design concept but also provide a complete engineering package for manufacturing, and that's exactly what I will provide you with. Finally, one of my core strengths as a freelancer is attention to detail. Getting each precise aspect of your project right matters deeply to me; achieving the smallest practical dimensions without compromising functionality will be at the forefront of my design choices. For premium performance within your total budget of **KRW 500,000**, choose me as your partner on this project—I guarantee meticulous workmanship coupled with respectful and consistent communication throughout all phases of our collaboration.
$88 USD in 1 day
7.5
7.5

As an accomplished 3D designer and CAD specialist, I have the skills and experience necessary to bring your Big Hero 6-inspired micro-robot project to life. With my extensive background in mechanical and electrical engineering, I can guarantee that you will receive a complete, manufacturable design package that adheres to your specific size constraints and functional requirements. My proficiency in Solidworks and AutoCAD, in addition to my in-depth knowledge of 3D printing processes, will ensure that the robot's internal arrangements for the battery, PCB, motors, sensors, and other mechanical components are optimized for both performance and achievable accuracy. Moreover, I am well-versed in designing for manufacturing and can expertly generate STEP/STL files, Gerber files, and manufacturing documentation. The most critical aspect of this project – your budget – is something I take seriously. Rest assured that my professional approach focuses on striking the right balance between functionality and economy. By employing my considerable experience with different slicer software, I can assist you in minimizing costs while still producing high-quality prototypes. Overall, my commitment to clear communication paired with precision-driven deliverables renders me poised to rise to the challenges of your microbot manufacturing endeavor. Thank you for considering my candidacy.
$250 USD in 6 days
6.5
6.5

Hello, I’m an Embedded Hardware Engineer experienced in PCB design, motor control, wireless communication, and IoT systems. I can develop the robot’s electronics, custom PCB, Li-Po charging system with 2-pin Pogo Pins, Bluetooth control, firmware, Python interface, and manufacturing-ready CAD files. I would first assess the feasibility of the arm mechanisms, reaction-wheel locomotion, and robot docking system, then provide a realistic cost breakdown and production estimate. The full scope may exceed the KRW 500,000 budget, so I’ll prioritize cost optimization without removing mandatory features without your approval. Best regards
$140 USD in 7 days
5.6
5.6

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience integrating electronics, firmware and mechanical systems, taking products from initial design through manufacturing. I can help develop a practical version of this robot, but the complete specification and multiple manufactured units are not realistic within KRW 500,000. Miniature arm actuation, controlled docking and relative positioning require feasibility checks before I can responsibly quote minimum size, unit cost or production quantity. My $250 bid covers a 14-day feasibility and costed design study. I would assess arm movement, holding torque, rolling and docking, establish size from actual component dimensions, and prepare a preliminary BOM and cost comparisons for 1, 3, 5 and 10 units, including engineering and charging equipment. I would preserve the mandatory 2-pin Pogo Pin charging requirement and seek your approval before proposing any feature changes. Full implementation would require a separate agreed budget and timeline. I can support editable PCB/CAD files, manufacturing outputs, firmware, Python Bluetooth control, assembly documentation and manufacturer-requested fabrication corrections. I would clearly distinguish analytical validation from physically tested functionality. I am flexible about staging the work to suit your priorities. Please contact me to discuss details.
$250 USD in 14 days
5.2
5.2

Hello, I have experience in embedded hardware, motor-control electronics, wireless systems, and custom PCB design. I can handle the robot’s electronics, PCB, Li-Po charging with 2-pin Pogo Pins, and manufacturing files, while assessing the feasibility of the movement and docking mechanisms. I’ll focus on cost optimization and provide a realistic estimate based on the required features and production quantity. You can check my portfolio for my previous PCB and embedded hardware projects. Best regards, Ahmed
$140 USD in 7 days
4.6
4.6

Hello, I hope this message finds you well. My name is Rade, and I am a mechanical engineer based in Belgrade, Serbia, with over nine years of experience in the field. I have completed many projects throughout my career, primarily utilizing SolidWorks software. My portfolio showcases several projects across various sectors, including the military, food, and pharmaceutical industries. Each project required a high level of professionalism and expertise in mechanical engineering. After reviewing your project, I am confident that I can assist you in developing an effective solution. I invite you to explore my portfolio, where you may find relevant projects that align with your needs. To ensure the best outcome, I would appreciate any additional information, ideas, or drawings you may have regarding the project. This will help me gain a deeper understanding of your specific goals. I look forward to collaborating on this project and future endeavors. Best regards, Rade
$140 USD in 7 days
4.2
4.2

With five year experience in robotics mechanical design PCB development and embedded systems I can help turn your Big Hero 6 inspired micro robot into a practical manufacturable engineering package I understand your focus is not only a 3D concept but a complete working system with independently controlled arms compact movement docking and separation Bluetooth communication sensors Li Po charging through 2 pin Pogo Pins firmware and PC control I can evaluate the physical feasibility of the reaction wheel movement mechanism and recommend practical alternatives only where technically necessary while keeping the intended appearance and mandatory features Delivery Complete parametric CAD assembly with STEP STL and manufacturing drawings PCB schematic PCB files Gerbers BOM and assembly documentation Firmware Bluetooth communication and PC control software Docking charging system with Pogo Pin contacts and protection circuit Cost optimized component list manufacturing estimate and technical documentation I will clearly separate analytically validated features from physically tested features and optimize the design for multiple identical units within your stated budget Best regards Bilal
$40 USD in 4 days
4.1
4.1

The specific risk is component miniaturisation and integration for manufacturable micro-robots. I handle this by specifying small-form factor PCBs and off-the-shelf micro-actuators that fit within the tight dimensional constraints. I will deliver the complete engineering design package, including PCB layout in Altium Designer and mechanical 3D CAD models in SolidWorks, so the manufacturing files are ready for fabrication. You get the blueprints to build your modular micro-robots. Are the micro-actuators intended to be custom machined or sourced from existing suppliers? I need confirmation of the micro-actuator sourcing strategy. I have a 5.0 rating across 10 reviews on here and Preferred Freelancer status.
$140 USD in 21 days
3.5
3.5

Are you looking for a practical engineering solution for your modular micro-robot that combines mechanical design, PCB development, embedded programming, Bluetooth communication, and manufacturing-ready documentation? I can help develop a structured engineering workflow focused on compact packaging, component selection, manufacturability, and realistic cost optimization while preserving your specified features. Experience I have 8 years of experience in engineering CAD, mechanical design, electronics-related design documentation, and technical development workflows. I can support the mechanical CAD ackage, component layout, design documentation, and manufacturing coordination, with specialized robotics,electronics, and firmware requirements assessed carefully before committing to the complete scope. Delivery Feasibility assessment covering robot dimensions, arm movement, rolling mechanism, and modular docking Parametric 3D CAD assembly with STEP/STL files and mechanical drawings PCB schematic, editable PCB design, Gerber files, drill files, BOM, and assembly documentation Two-pin Pogo Pin charging dock design with charging and battery-protection requirements Component selection with manufacturer part numbers, specifications, and supplier links Firmware and PC-control software scope, including Bluetooth commands and sensor monitoring Manufacturing cost estimates for 1, 3, 5, and 10 units Assembly instructions, engineering notes, and manufacturing review revisions
$40 USD in 3 days
3.7
3.7

Hello! We at HardFault are excited by your vision for a micro-robot inspired by *Big Hero 6*. Considering your requirements for a robust, miniature modular robot with a comprehensive engineering package, our expertise in custom PCB design, sensor integration, and tight power management for IoT devices will be invaluable. Our team approach ensures that we cover more ground than a solo freelancer, from real-time firmware development on ESP32/STM32 to backend API integration for telemetry. We propose starting with a detailed feasibility assessment to ensure optimal component selection and manufacturability within your budget constraints. Could you share more on the intended use cases for the robot's interconnectivity and movement functions? This will help us tailor the design to your exact needs.
$130 USD in 25 days
2.6
2.6

I appreciate the detailed project outline. Getting the engineering design and manufacturing files right will be important, especially when it comes to optimizing functionality within the budget constraints. I’ll handle the complete design package by focusing on efficient component selection and manufacturability, paying close attention to the integration of the charging system so that scalability is achievable right from the start. I’ve worked on similar robotics projects, so I know what needs attention, what can easily be overlooked, and where the details matter most. Could you clarify if any specific components are preferred, or should I prioritize availability and cost? I’ll take care of delivering a fully functional engineering package from the first step through final delivery. Regards, EnriqueHR
$100 USD in 7 days
1.0
1.0

Hello, I am an experienced Electronic Engineer specializing in PCB Layout, Bluetooth, 3D Modelling, 3D CAD, Mechanical Design, Robotics, CAD/CAM, Embedded Systems, Mechanical Engineering and 3D Design. I can handle the complete development process from schematic design and component selection to PCB layout, firmware integration, testing, and troubleshooting. I work with industry-standard tools such as Altium Designer, KiCad, EasyEDA, Proteus, and MATLAB to deliver reliable and production-ready solutions. My focus is always on accuracy, performance, manufacturability, and clear documentation throughout the project. I am ready to discuss your requirements and provide a high-quality engineering solution that meets your technical goals, budget, and timeline. Thanks.
$30 USD in 6 days
0.0
0.0

Hi! I can help develop a practical, cost-optimized design package for your modular micro-robot, including CAD models, PCB design files, BOM, firmware, and PC control software. I’d begin with a feasibility study to identify the key engineering constraints and establish a realistic budget before finalizing the design. Given the extensive functionality and strict KRW 500,000 budget, I’d prioritize manufacturability, modularity, and transparent cost estimates. Let’s discuss the requirements and agree on a realistic development plan before proceeding.
$70 USD in 3 days
0.0
0.0

Dear Client, Your modular micro-robot requires more than compact CAD design—it needs a realistic engineering architecture that integrates mechanical movement, independently controlled arms, robot-to-robot docking, wireless communication, battery safety and economical manufacturing. I have 11+ years of experience in electronics, embedded systems, PCB design and product development across 500+ assignments. My approach: Feasibility Study → Component Selection → Mechanical CAD → Electronics/PCB → Firmware → Bluetooth & PC Interface → Pogo-Pin Charging Dock → Manufacturing Files → Cost Optimization → Validation I can provide the complete engineering package, including editable CAD, STEP/STL, mechanical drawings, schematics, PCB source files, Gerbers, charging-dock design and assembly documentation. I would focus on practical feasibility, compact mechanical design, reliable electronics, safe pogo-pin charging, robot-to-robot docking, and realistic cost optimization to maximize the number of functional robots within your budget.” Two important questions: 1. What is your target robot size? 2. How many robots should connect together? Profile: https://www.freelancer.in/u/ElectronicsMust If you message me, I’ll outline the first three engineering decisions needed to establish a feasible architecture, practical minimum size and honest per-unit cost estimate. Kind Regards, Avi Gupta Quality is never an accident
$140 USD in 4 days
0.0
0.0

I can help turn your requirements into a professional, reliable solution tailored to your needs. My focus is on delivering practical, user-friendly solutions with clean execution, strong functionality, and attention to detail. For your Microbot Design and Manufacturing Blueprint, I can help with the complete engineering design package, ensuring all components meet your specifications and budget constraints. I will provide manufacturable files, including PCB designs, CAD models, and comprehensive documentation. I will also evaluate the feasibility of your listed functions, optimize the design for cost-effective manufacturing, and ensure that the robots can communicate and connect as required. I'd be happy to discuss your requirements, answer any questions, and outline the best approach for your project. Regards, jamesh920
$150 USD in 7 days
0.0
0.0

Hi, Looking for an experienced technology partner to turn your concept into a reliable, production-ready product? We can help. Greetings from OSTronik India, we are specializing in Power Electronics, PCB Design, Embedded Systems, Firmware, IoT, AI Integration, and Mobile Application Development. Our Expertise ⚡ Power Electronics DC-DC & AC-DC converters, power supplies, power management, voltage/current regulation, protection, isolation, switching circuits and customized power solutions. ? PCB & Hardware Multilayer PCB design, schematic development, component selection, BOM preparation, Altium Designer, EMI/EMC considerations and production-ready files. ? Embedded & Firmware STM32, ESP32/ESP8266, PIC, AVR, Raspberry Pi, Embedded C/C++, sensor interfacing, hardware integration, debugging and optimization. ? IoT & Communication UART, SPI, I²C, CAN, RS-485, Modbus, MQTT, Wi-Fi, BLE, LAN, cloud connectivity and real-time monitoring. ? Mobile Applications Custom Android & iOS applications for device control, monitoring and data visualization. We can take your project from concept → design → prototype → testing → production, with a focus on reliability, performance and cost efficiency. Share your requirements or existing files, and let’s discuss how we can bring your product to life. Best Regards, Team OSTronik India Empowering Innovations
$140 USD in 7 days
0.0
0.0

Nice to meet you , My name is Anthony Muñoz, I express my interest in working on your project after carefully reading the requirements and concluding that they match my area of knowledge and skills. I am currently the lead engineer for the IT agency DSPro and I have more than 10 years of experience in the field. I have successfully completed a large number of similar jobs and I consider your project to be a challenge in which I would like to work and be able to make it a reality. Please feel free to contact me, it will be my pleasure to help you. I greatly appreciate the time provided and I remain attentive to any questions or concerns. Greetings
$113 USD in 7 days
0.0
0.0

Hi, I’d love to help bring your project to life. I work across design, development, UI/UX, and engineering, with a strong focus on quality, clear communication, and getting the job done properly. I have extensive experience in robotics and mechanical design, and I can create a comprehensive engineering package for your modular micro-robot inspired by Big Hero 6. I understand the importance of functionality, manufacturability, and staying within your budget of KRW 500,000. My approach will prioritize minimizing costs while ensuring all required features are included. I’m reliable, detail-focused, and easy to work with. Let’s have a quick chat about what you need — worst case, you walk away with a free consultation and a clearer idea of how to move forward. Regards, Sue-Ann
$150 USD in 7 days
0.0
0.0

Your Big Hero 6-inspired micro-robot needs a complete manufacturable package for PCB and mechanical fabrication, and we'll deliver the first revision of CAD models, drawings and BOM within 7 days. I'm from a CS background and handle the file structure and documentation, and our team has mechanical engineers who design the joints and enclosures for repeatable assembly. We'll work inside your KRW 500,000 total budget and flag anything that pushes costs up before we build it. Which part should we design first, the chassis or the electronics housing? Do you already have the PCB dimensions fixed?
$130 USD in 7 days
0.0
0.0

Seo-gu, Korea, Republic of
Member since Aug 6, 2025
$80-100 USD
$10-30 USD
$10-30 USD
min $10 USD
$250-750 USD
$10000-20000 USD
$250-750 USD
$750-1500 USD
$250-750 USD
$30-250 AUD
$30-250 USD
₹750-1250 INR / hour
€100-300 EUR
$70-95 USD
$30-250 USD
$250-750 USD
$750-1500 USD
$250-750 USD
€250-750 EUR
$10-30 USD
₹600-1500 INR
$80-100 USD
₹250000-500000 INR