Need a PCB design with Atmega328 microcontroller and 24LC512 I2C Eeprom. The board should be running on 8MHZ 3.3v..
The board should be no more then 2 layers,
The size of the board can be around 50mmx25mm.
The part size should be only 0805.
Also need XBEE Headers connected to tx ,rx
Hi there,
I have read your project description and i'm confident i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project.
Thanks
.
.
Hello! I can help you asap! I am better than the guys here! I am not proud I am realistic. If you are interested in helping you send me a message! Have a great day!
Hello there, I have read your project description and I could do that for you. I invite you to give me a ping in chat so we could discuss more about it, also feel free to check my profile and see my portfolio. Thanks, best regards.
Hello sir,
I have experience in designing electronics circuits and can develop hardware compatible smartphone and PC based apps.
I also have done a lot of IoT projects and can transform your idea into a fully working product.
If you wish we can discuss details in chat.
Thanks
Hi Sir,
We are professional PCB designers, please check our profile, we will give you good results. lets talk to us on your project.
We are professional engineers and developers who do such projects from the last 10 years.
We offer you our skills for this project at very low rates comparatively without compromising the quality of work.
Let me introduce you to our company TURKTRONICS.
We are TURKTRONICS. We are team of professionals with 10+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point.
In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have the manufacturing facility and we produce the very high standard PCB boards and send ready products to customers doorsteps via DHL.
We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required.
We are very much looking forward to hear from you on this in coming days!
Cheers!!!
Ahmad
Lead Technical Engineer
TURKTRONICS
An Internet of Things Company !
Hi,
I had used atmega since 2011. in order to make your board run more than 2 years is on your firmware. put it to sleep mode wherever not using it's main function, for example communication with xbee. AVR can run in very low consumption (Bellow 5 miliamp) if you put it to sleep mode. we can use lithium battery to make it longer. I'm not sure if we use cr2302 battery it will stand until 2 years, because AVR atmega isn't low power MCU, but we can achieve low power consumption by put them to sleep mode.
Let's discuss the details over chat. I will use eagle , and I think 2 layer is enough. this is my daily task and I'm professional PCB and firmware developer.
best Regards,
Rijal
Hello,
I am Anthony from Sri lanka. I have 7 years of experience in the filed and I am very much interested in your project.
I can create this PCB and also if you can pay the shipping cost I can ship one free PCB made.
Why you should hire me ?
* As a full time freelancer I have my own PCB fabrication work shop and testing lab. So there is no problem doing live tests with you after the device has been developed.
* My workshop is equipped with CNC machine, FDM 3D printer and DLP 3D printer. So there is no problem designing and printing plastic parts you required.
Please contact me if you are interested. Thank you
Anthony
Hello.
Greetings of Peace!
I have great experience in developing custom electronics systems. I have developed automation for a solar thermal power plant and have created many other industrial solutions.
I have mastered all aspects of Arduino and can deliver you the best-optimised work.
We will design PCB in Eagle in 2 layers using all SMD components.
please get in touch to discuss in detail.
Thus, I can give you a one-stop solution for prototyping, PCB design, assembly, and manufacture. I would like to have the opportunity to work with you and would love to discuss your requirements in detail.
Please have a look at my portfolio for my detail work.
https://www.freelancer.com/u/krunalbhongade.html
Thanks and Regards,
Bk Krunal
Hello there,
This is a default bid made. we'll discuss the price later in the chat
after reading your project i can do this for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss this further..
Thanks
.
.
Hi dear,
I'm interested in the position of an Atmega328 PCB Design Project that you recently posted, particularly being from Embedded Systems and PCB Design.
I have experience in PCB design, hands-on knowledge on schematic capture and multi-layer layout with signal integrity knowledge (high speed & power signals).
Please, see my portfolio.
Feel free to contact me to further discuss this position.
Dear you,
I have 6 year experiences to design circuit using Altium. I have worked on alot project related to MCU, PA, Filter... We can discuss more on chtting.
Brg!
yes buddy, its me imad, have done 200+ projects regarding matlab, arduino, pic, atmega cotrollers, can design and fabricate every type of pcb, u will get the best work accompanied with brotherhood,,,,,,,,,,,,,,,,,,,,,,,
Hi Sir.
I am an experienced PCB Designer and Electrical Engineer with expertise in CAD PCB designing like Eagle CAD, KiCAD, Altium Designer and Circuit Studio.
I have also ability of 3D PCB design.
I am sure that you will be satisfied by my work. Thanks.
Hello,
My name is Andrei, i am a Romanian IOT Developer with a lot of experience in IOT projects and automatics .
I have work a lot of designs with ZigBee , i know all the tips and tricks. i can do your design in 2 layers and SMD , but i need to place SMD resistors and stuff on the both sides , because is not enough place for just one side .
I can work with all types of Microcontroles programming in C , C++ , Mikro C , CCS C , Atmel Studio , Arduino , gcc .
Creating Schematics and PCB in Kicad , Eagle , EasyEDA and Proteus (+simulation).
i have an workshop full of parts and the infrastructure to build PCB and test the solution end to end using special tools (Spectrum analyzers , oscilloscope , logic analyzers )
Derivable on the project :
Schematic design
PCB Design
Gerber files for manufacturing
Build of materials from Element14, Digikey or Mouser
As an additional service i can make you a full working prototype and ship to you.
Regards,
Andrei
hi...I am a KiCad pcb designer .....you described your project in detailed...looking good ....it can done in below 10 days...you can also choice the shape of board too....if you are oke with KiCad contact me...I can help you
I'd love to help you with this. I'm an EE of 25 years in Austin, TX, USA.
For layouts I can use PADS, KiCAD, and Eagle.
Schematics, I can use Orcad, KiCAD, and Eagle.
Thank you for your consideration!
Rick
Hello,
I am an electromechanical and electronic technician, and I only have the thesis to be an electronic engineer.
I work in an electrical testing laboratory, under international standards, im work here for more than a year ago.
I have done PCB design courses, I use several softwares for your comfort. I have experience in PCB design.
If you want to know something else, do not hesitate to contact me
I think it could be of great help for your project.
I am already at your disposal.
regards
I would like to start with an initial discussion to understand the requirements or specification of the board. There are other questions like how will the board be powered? Power voltage levels will dictate the voltage regulation circuit. Is there a preference of the EDA to be used?
If you already have a schematic and decided on all the parts to be used, that would speed up the process. Please feel free to contact me in the chat.