MEPF + HVAC Design, Modeling, Calculations, Analysis, & Computations - 07/12/2018 04:25 EST

Basically, There are 3 types of buildings:

1. The hotel: 9,240 m2 x 14 Floors + 3 basements floors

2. The Cinema Building: 3,000 m2 x 5 Floors

3. Mall Buildings: 3,000 m2 x 2 floors x 20 Buildings

If you did the analysis and computations for 1 floor in the mall buildings, you will multiply it by 2 for the same building and by 20 for the other buildings. For the Cinema building, you will multiply it by 5. This is because all these buildings have the same area and height.

For AC (HVAC): Consider the following volumes:

Hotel: 9,240 m2 x 15 floors = 730,000 m3

Cinema Building: 3,000 m2 x 5 floors x 6 m (height) = 90,000 m3

20 buildings. each building 3,000 m2 x 2 floors x 6 m (height) = 720,000 m3

Inner streets (43,160 m2 ) x 6 m (height) = 258,960 m3

EER(Energy Efficiency Ratio)=cooling capacity of ac/power consumed by AC cooling capacity of 1 ton is equal to 3.517 kW of power.

For the AC electricity consumption for the inner streets around each building, add 211 Kwh/ day (77,000 Kwh annually added to the electricity consumption for each building)

To compare the total energy transmittance/heat transfer under the daytime condition in full sun of all glass types, based on a set of standard conditions formulated by ASHRAE

Solar intensity of 230 Btu/Hr/sqft

Outdoor/Indoor temperature difference of 14°F

RHG (btu/Hr/sqft) = ( SC x 230 ) + ( U-Summer x 14 )

RHG ( W/m2) = ( SC x 630) + ( U-Summer x 7.8 )

For the electrical part: Assume consuming the restaurants 9.3 Kwh/ m2 or 100 Kwh/ ft2 annually.

This means each building in the mall will consume 6,460,000 kwh annually +77,000 Kwh = (6,537,000 Kwh). for the 20 buildings = 130,740,000 Kwh.

The cinema building might consume 17,000,000 Kwh annually as there will be 3d projection mapping on the facade of the building.

The hotel building might consume 20,000 Kwh / room annually. This means the annual consumption might reach 44,000,000 Kwh, in addition to the exterior light for the ads on the side facade of the building and the 3d projection mapping (1,000,000 Kwh). So, the total will be 45,000,000 Kwh annually without the pools and jacuzzies.

I need also some calculations of the following to be considered in using geothermal energy (check the form in the attachments):

Heating:

Domestic Hot Water (if provided by heat pump):

Total Peak Load for Domestic Hot Water (DHW): Annual Domestic Load for Hot Water:

Cooling (if required):

Active Or Passive Cooling?

Heat Pump (if known)

System Type:

If Hybrid – Secondary Equipment/System:

Total Capacity of Heat Pump (Heating):

Total Capacity of Heat Pump (Cooling):

Estimated COP (Heating): Estimated COP (Cooling):

I created the Revit model for the structure and have some of the Revit families for the plumbing elements, which I will provide via the chat.

So I need the following:

1. MEPF Designs (HVAC/Fire Protection/Plumbing) on Revit

2. 3D HVAC, Plumbing model on Revit + CFD

3. Hydraulic Calculations

5. Energy Analysis

6. Solar design (I have the calculation)

7. Duct Design

8. 4D information modeling using Navisworks + Clash detection

( 0 reviews ) Jeddah, Saudi Arabia

Project ID: #18312085

28 freelancers are bidding on average \$298 for this job

saied2017

السلام عليكم Hello I'm Mohamed Saeed. mechanical engineer with high experience in HVAC, plumbing ,etc. I have checked your job description and I'm ready to help you

\$444 USD in 1 day
(42 Reviews)
5.9
bchandra1955

Professional engineer with 40 years of experience in design and development of HVAC and fluid flow systems Relevant Skills and Experience Please attach full details

\$500 USD in 10 days
(82 Reviews)
6.2
Is88

Hi Im a Mechanical Engineer who works as a design engineer for MEP sections of the high rise buildings. I do designing works for fire systems, plumbing systems, HVAC systems, Electrical systems, ventilation systems and More

\$200 USD in 3 days
(31 Reviews)
5.6
andreird129

hello how are you? i am very interested in your project i have read your description very carefully I can do your job i have great experiences in python hope to hear from you

\$155 USD in 3 days
(16 Reviews)
4.8
IvanWOW

Thanks, I read the description and I want to offer you my services. You can check my past simular works here [login to view URL] and here https://www.freelancer.com/u/IvanWOW contact me to discuss this project%%%%% thank you More

\$222 USD in 5 days
(5 Reviews)
5.0

Hi, i have team of engineers with extensive experience in thermal system design and analysis. I have recently worked on zero energy building and conventional building thermal analysis which included roof,floor and wall More

\$400 USD in 10 days
(13 Reviews)
4.8

Hello Sir, Contact me..... I am an expert Mechanical Engineer and PhD scholar in HVAC with international journal publications. I can provide you excellent work with 100% quality assurance. Visit my profile and s More

\$155 USD in 3 days
(14 Reviews)
4.7
vishok

Good day! I read your application carefully. And I can fulfill your task. 1. Calculate the cooling and heat loads for your building. 2. I will pick up fan coils (taking into account your recommendations for the manu More

\$56 USD in 1 day
(2 Reviews)
3.7

i will use the HPA software for your load calculations and also include your refered calculations. i will then make zones in autocad and will provide an optimal HVAC solution that best suits your requirements. i ha More

\$222 USD in 7 days
(7 Reviews)
3.5
fsaric

Hello, I'd like to apply to your job "CFD". I have hands-on experience in civil engineering field, performing advanced CFD analysis using mostly Ansys Fluent, Star CCM+ and other codes. A number of different assignm More

\$500 USD in 20 days
(6 Reviews)
3.9
tuongeng4

Hi there! I very interesting with your project. I will complete your project by revit 3d, 2d. Hope see you soon to work on time thank you very much!

\$250 USD in 5 days
(10 Reviews)
3.9
Abesta

Hi,we have many professional experts in Revit and Revit MEP and Revit structure,we'll be delighted to score your [login to view URL] for choosing us

\$500 USD in 10 days
(1 Review)
2.0
kkataria1495

Hi dear, i have good experience in solar design engineering. I can do energy analysis and solar design from the list. Please ping me inbox so we can discuss further and i can start on it. Thanks

\$111 USD in 2 days
(1 Review)
2.1
eraysbir

\$288 USD in 10 days
(1 Review)
2.0
Ponns02

Hi, I am Mechanical Graduate Student with 1.6 of experience in CFD simulation Field. I have handled the project like Basement and Ventilation and also thermal related problems like Electronic cooling system and also ha More

\$166 USD in 7 days
(0 Reviews)
0.0
ilabl

I have a diploma bac +3 in the field of renewable energies and I have dimensioned several photovoltaic projects with excel file and pvsyst software

\$311 USD in 10 days
(0 Reviews)
0.0
mohammednabil976

I have been working in Electromechnical Field for over two years as a site, technical office and currently I work as a project Engineer With Planning and secluding skills by using Primavera. Since one year I completed More

\$200 USD in 4 days
(0 Reviews)
0.0
sakthivelsdm

Hi, I submit this offer for your project. Should you require any further details please let me know. Regards, Sakthivel G.

\$750 USD in 10 days
(0 Reviews)
0.0