Find Jobs
Hire Freelancers

Prybar Design

$250-750 AUD

Completed
Posted over 5 years ago

$250-750 AUD

Paid on delivery
Determine stresses in prybar and materiel selection for pry bar. I have designed a prybar that will experience quit large loads, I have the product in a 3d computer model. I need somebody to use finite element analysis to determine the stresses through the prybar, to recommend any design changes, to select metals and heat treatment requirements. Also I have designed the handle to be shrink fit over one section, will need help to determine tolerances for the shrink fit.
Project ID: 17906905

About the project

28 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Hi, i am Aerospace Engineer with vast experience in structural design, optimization and FEA. I have recently designed, optimized and analyzed internal structure of commercial aircraft wing, other experience includes FEA of aircraft compressor and turbine, bike crankshaft etc. Kindly visit portfolio and provide more details in chat.
$250 AUD in 5 days
5.0 (26 reviews)
5.4
5.4
28 freelancers are bidding on average $399 AUD for this job
User Avatar
Hello, Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulation, MATLAB, design analysis. I am a standard member here and a full time freelancer, so you can contact me anytime. to brief about me: I am mechanical design engineer by profession and graduate in mechanical engineering with PG in CAD/CAM, ANSYS & Solidworks. I can perform almost all kind of simulation like CFD, FEA, structural analysis etc. I have expertise in many design tools like solidworks, CATIA, ANSYS, 3DMax, Creo MATLAB etc. As i have engineering background with Nine years of industrial experience and very confident about any project related to mechanical engineering field. I have preferred freelancer badge, you can see next to my profile name. You can check my profile and portfolio:- https://www.freelancer.com/u/ashrafshekh.html My bid is negotiable and it depends on the required deliverable. Looking forward to hear from you & feel free to contact me Thanks & regards Ashraf Shaikh
$555 AUD in 10 days
4.9 (130 reviews)
7.9
7.9
User Avatar
sounds interesting, we can work on it i would like to see the 3d model and understand what sort of data you have for simulation. do you have some benchmarks for mesh and boundary conditions or want me to choose it. would like to discuss more.
$298 AUD in 1 day
5.0 (67 reviews)
7.8
7.8
User Avatar
Hi there, This is Bogdan from Romania. I'm a mechanical engineer - specialized in the industrial robotic field, 3D designer and modeler (from time to time and some projects I could make the functional prototype too). I'm doing product design, industrial design, reverse engineering, ideation, etc. I have over 15 years experience working on various systems/devices across multiple industries, from concept to launch. 1 - in the first step, the prybar model should be analyzed from the practical point of views... (engineering experience, visual appealing - you know that the bar could be made in super material, but if it is not looking strong enough, will not gave confidence to the users...) 2 - at least two or three scenarios should be created, where the support point to be different and the pull force applyed... 3 - based on the result of fea, some features could be improved or even significantly redesigned... 4 - the handle is ok, but depends a bit on the shape... Regards Bogdan
$666 AUD in 10 days
5.0 (23 reviews)
6.4
6.4
User Avatar
Hi, Im a Mechanical & Material Engineer who is involved in product design. I can do the stress analysis for the product in both FE analysis and solidwork simulation. Further through material analysis, i can provide the best dimensions for the tolerances and product dimensions with the selected material properties. Let the professionals deal with this. Thanks
$250 AUD in 1 day
4.9 (48 reviews)
5.7
5.7
User Avatar
hi. i am mechanical engineer and project management specialist with 7 years of experience in areas of design, mechanical design, calculus, manufacture design and projects. i have knowledge in different softwares, 3d modelling (Solidworks, Inventor), 2d modelling (Autocad), calculus and statistical (Mathcad Prime, Excel), Project schedule (MS Project, WBS schedule).
$500 AUD in 5 days
4.9 (11 reviews)
4.9
4.9
User Avatar
I am a mechanical engineer by profession currently working in the aerospace industry in the field of structural design and analysis. I am highly skilled in the area of materials selection and stress analysis of primary structures, and would consider myself to be an ideal candidate for the project you propose Should you consider that my background and expertise would be suitable to the requirements of your current project, please get in touch to discuss further details. My kind regards Peter Nelson
$555 AUD in 10 days
4.9 (6 reviews)
4.9
4.9
User Avatar
Dear customer, First I would like to thank you for this opportunity to quote your project. Delivery Scope: To elaborate a Finite Element Analysis Report containing: 1. Design considerations and Input data (including material selection and heat treatment requirements); 2. Model characteristics; 3. Results (Stresses and Deformations); 4. Design changes suggestions, if necessary; 5. Shrink-fitting tolarances determination of handle over prybar section. Client scope: To specify loading conditions and to provide 3D model file.
$260 AUD in 7 days
4.7 (13 reviews)
4.1
4.1
User Avatar
Dear Sir, I am Alaa Elsisi, I am using several finite element software 15 years ago. I an expert in finite element modelling and I think I can do this for you. Thanks Alaa
$333 AUD in 10 days
5.0 (9 reviews)
3.5
3.5
User Avatar
Dear employer, I am an Aeronautical Engineer with over 7 years of experience in FEM analysis and 3D modeling and design, applied to Aerospace Engineering, Transport, Mechanical Engineering and Oil & Gas Industry. I have good understandig of Stress analysis techniques, including classical hand calculations and finite element analysis (FEA), for dynamic and static analysis. I strongly believe that my experience, achievement, and education are appropriate for this Job. Thank you for taking the time to review my resume, and I look forward to a favorable reply. Kind regards. HCE
$280 AUD in 10 days
5.0 (1 review)
3.5
3.5
User Avatar
Hi , I have been working as FEA analyst with 5 years of extensive experience in various types of of FE simulations like static , dynamic ,modal , non linear implicit , fatigue, buckling etc. I am well versed with various tools like Ansys , Altair hyperworks , nx nastran etc. I am looking forward to your project and will surely not disappoint you with my skills and expertise over the FEA subject. Thank you
$250 AUD in 3 days
4.2 (3 reviews)
3.1
3.1
User Avatar
Hi, I will do it for 150. I guarantee that you will be satisfied with my work.
$250 AUD in 7 days
5.0 (3 reviews)
2.4
2.4
User Avatar
With the available system at my end, i can easily perform Finite Element Analysis for your Prybar design with suitable results and also guide for better materials selection.
$555 AUD in 7 days
1.9 (3 reviews)
1.2
1.2
User Avatar
I am a professional finite element analysis consultant and trainer. please contact me for further information. my mobile number is +918999725432
$250 AUD in 5 days
5.0 (1 review)
0.4
0.4
User Avatar
Hello Sir i'm a phycisist engineer ,i do know how to do improvements on designa using FInite Element Analysis. I only need your 3D file and if you have any first test or any specific requirement just let me know it.I can Charge you only 200 if you wanna hire me.I hope you could award me Sir.
$250 AUD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
hi if we choose the correct matrerial for die casting the bar according to the stresses and safety factor heat treatment wont be needed. also the handle is rubber or any plastic. no need any precision
$250 AUD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
Dear Sir/Madam, It would be a plasure to do this job. Look forward to hear from you soon. Regards, Ehsan.
$350 AUD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, I can make the stress analysis in SolidWorks and 2D workshop drawings with all the information needed for manufacture. Please feel free to contact me if yuo have any questions or doubts. Thank you, regards.
$555 AUD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Statics solutions is an Engineering Services outsourcing and product development firm. Statics solutions was established in the year of 2017 by a team of qualified & experienced professionals with the objective of enabling ambitious manufacturing companies to design and build better products. Statics solutions is a company of innovators, specialists in the field of design engineering world. Statics solutions helps global organizations identifying their engineering needs and challenges through a wide range of engineering design solutions and services that include Product design, Engineering analysis, Manufacturing engineering solutions, and Engineering change management.
$444 AUD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi I have placed a bid for this project if u are to offer me the project I will use NX NASTRAN 12. I am a new freelancer however I have 7 years stress experience including FEA experience so I am positive with this project I will ensure that you receive the results within the defined timescale too look forward to hear from you Regards Pat
$555 AUD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I am interested in this project. Could we please discuss. Please see my qualification and experience below. MSC IN MECHANICAL ENGINEERING, UNIVERSITY OF SUSSEX I have 7 years experience in Mechanical design, manufacturing design, Special purpose machinery, Furniture design, product design and industrial design. Worked on a number of big and small projects for our Rail and Rolling stock clients like Arriva, Porterbrook, Knor-bremse, Unidad, Wabtec, Siemens, Alstom and our Commercial sector clients like Galliford try, Balfour beatty, Mace, Chisholm and Winch, Barlows, Hamad International Airport, DAS, Technology desking and TM Consultancy. Please message me to discuss in detail.
$750 AUD in 12 days
4.6 (1 review)
0.0
0.0

About the client

Flag of AUSTRALIA
Keysborough, Australia
5.0
51
Payment method verified
Member since Nov 25, 2013

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.