In Progress

Need PCL program written for my Velocio Branch 1430 - 14/01/2020 13:58 EST

SXS drag racing - 2 lanes - a left lane / a right lane

starting line push button to activate the process > on press makes the blue light blink indicating racers can stage. (INPUT 1)

Each lane - with a startling line infrared beam (as an input) that is there to indicated when the competitor leaves. The beam broken is an indicator that the racer is ready - when the beam connects it means the racer left. Left lane (INPUT 2) / Right Lane (INPUT 3)

Christmas tree (as its called in the sport) is a an array of lights on a self standing pole.

Top bulb > BLUE -- that blinks (only after starting line button is activated (pushed once) (OUTPUT 1)

Array of lights sequence -- top to bottom

left lane Amber light > lights up solid (stays on) while the left lane infrared is blocked - indicating a racer is staged (OUTPUT 2)

right lane Amber light > lights up solid (stays on) while the left lane infrared is blocked - indicating a racer is staged (OUTPUT 3)

a randomized timer between .5 seconds & 2.0 seconds initiates the following light pattern

Amber light (OUTPUT 4) > light comes on for .5 seconds

Amber light (OUTPUT 5) > light comes on for .5 seconds >> .5 seconds after OUTPUT 4 light goes off

Amber light (OUTPUT 6) > light comes on for .5 seconds >> .5 seconds after OUTPUT 5 light goes off

Green Light (OUTPUT 7) > light comes on for 3 seconds >> .5 seconds after OUTPUT 6 light goes off

Left Red Light (OUTPUT 8) >> comes on -- flashing for 5 seconds ONLY if INPUT 2 is activated before the green light (OUTPUT 7) is lite

Right Red Light (OUTPUT 9) >> comes on -- flashing for 5 seconds ONLY if INPUT 2 is activated before the green light (OUTPUT 7) is lite

RULE > if both left and right lanes leave before green light (OUTPUT 7) is lit -- which ever did first is only red light activated

finish line left lane infrared beam (INPUT 4)

finish line right lane infrared beam (INPUT 5)

finish line right lane WIN light (OUTPUT 10)

finish line left lane WIN light (OUTPUT 11)

which ever of INPUT 4 - or INPUT 5 is switched first indicates winner -- -- if either activated the red light the other WIN light goes on - if both did then who ever did 2nd activates WIN light

Basic explanation of the process between two competitors

Button pushed by starting line official > blue light blinks (indicates racers can stage - which is process of moving vehicle in lanes and break the beam

left lane infrared broken > left lane amber light turns on >> indicating the racer is staged

right lane infrared broken > right lane amber light turns on >> indicating the racer is staged

when both left and right lane amber lights are lite -- randomized timer starts tree count activation of sequence

after green light is on - racers take off -- first one to break the finish line infrared (without red lighting) wins - and win light comes on.

Branch 1430 - 6 D in, 12 D out, 1 RS232/RS485

Skills: PCB Layout, PLC & SCADA, Microcontroller

See more: need blog posts written, need someone program code, need software program 2008, need sales page written, build program written, need wikipedia article written, need 100 articles written, pay visual basic program written, need program written, need microcontroller program, need 1000 articles written, need custom program, hello program written language, need free program logmein reascue, college management system program written vb6, payroll program written program, payroll program written, need program written website

About the Employer:
( 39 reviews ) Lewistown, United States

Project ID: #23389695

Awarded to:

kathrotiyaharsh0

I read your process explanation, and I also write down the logic in my log book but unfortunately I have no software for your plc, if you have that software then I can build same logic for you for your project if you g More

$167 USD in 2 days
(0 Reviews)
0.0

8 freelancers are bidding on average $198 for this job

hayat38402

We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • ID More

$250 USD in 7 days
(15 Reviews)
4.6
Hmohamed82

Specialized in Automation Engineering with a solid background in Electrical Power Engineering, over 14 years of work experience gained throughout multiple Automation platforms (Rockwell, Schneider, and Siemens) achievi More

$225 USD in 5 days
(4 Reviews)
4.1
BOSIREX

Am a Mechatronic engineer with 5 year experience in Sim 700 and 1500 PLC and SCADA programming and I believe i can handle your task to perfection

$200 USD in 7 days
(2 Reviews)
2.0
hsh564cf84accd96

Hi my Professional Aim is: (Services then Solutions then Satisfactions) I hope you are [login to view URL] an experience in this field from last 5 years i am sure i can do it perfectly with in a time and budget Able to deliver y More

$140 USD in 7 days
(2 Reviews)
1.8
vadvik

Hello. I have 15 years of experience in developing software products for process automation systems. I have implemented more than 100 projects. I render services 1. Development - refinement of software. 2. Audit of rea More

$250 USD in 5 days
(1 Review)
0.3
YuJingXie860118

Hello. Nice to meet you. I am very interested in your project. I have rich experience for embedded engineering-PCB design, firmware development, prototyping and mass produnction. I am familiar with many CPUs such as PI More

$250 USD in 7 days
(0 Reviews)
0.0
DavidSmith1996

My price is low because i just sign up lately and i need some preview on my account to rise me up. Identity verified, Phone verified, email verified by freelancer and i just need your trust. I have experience in study More

$99 USD in 1 day
(0 Reviews)
0.0