Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    41 gsm usb jobs found, pricing in USD

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded soft...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $767 (Avg Bid)
    $767 Avg Bid
    8 bids

    Need router upper and lower shell: 1. 4 antennas on both sides; 2. Three USB A on the back; 3. 5 RJ45 on the back; 4. 1 DC socket on the back; 5. A reset switch on the back; 6. There are indicators at the top. A skp format file is required. The design is simple and beautiful. There are other requests for private chat.

    $55 (Avg Bid)
    $55 Avg Bid
    1 bids
    Robocall server 6 days left
    VERIFIED

    A center of family planning is looking for a Robocall solution to remind patient to visit doctors...the patient to reminder them the date of the visit. at the end of each day, a full report should be given. The voices will be prerecorded by our team here. We will use goip gsm gateway (sip) for the calling. We have servers to host the application.

    $263 (Avg Bid)
    $263 Avg Bid
    6 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded soft...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $760 (Avg Bid)
    $760 Avg Bid
    8 bids

    Modify cgminer or bfgminer driver file so it will work with FPGA mining hardware connected with USB-UART bridge. Bitstream is programmed on the SPI ROM in the FPGA miner. Mining bitcoin, and need to be connected to pool that works on stratum (supported with cgminer/bfgminer)

    $183 (Avg Bid)
    $183 Avg Bid
    4 bids
    Android VNC 6 days left

    Hi i got a project code, but i want some specfik add ons in it. such as working on 3/4g instead of wifi or usb.

    $3803 (Avg Bid)
    $3803 Avg Bid
    30 bids

    Hi everyone, I am looking for a C# programmer to develop a windows application which can communicate with a simple USB clicker. The windows application is simply nothing than an empty form. When the application is run, the USB clicker will minimize the application window if it is maximized and will maximize the application window if it is minimized

    $158 (Avg Bid)
    $158 Avg Bid
    15 bids
    offline map app for orange pi 5 days left
    VERIFIED

    Develop a offline map app that runs on orange pi. The app must allow to set geofences with a specific data in this case speed limits per geof...this case speed limits per geofence. Must have implemented the protocol for connecting with another device to be able to send the geofence data to the device connect it via USB UART, bluetooth and rs232.

    $1297 (Avg Bid)
    $1297 Avg Bid
    26 bids
    Trophy icon E-COVER for ebook 2 days left

    ...Setup-lighting tricks exposed" Subtitle " A breakdown of all the tricks and gimmicks used on the best battlestations" The bundle sold will contain: -The ebook -The video course - A USB multi-color remote controler LED strip I want a mockup of this bundle that really catches the attention of the viewer and makes it look like a lot of stuff Please be creative

    $125 (Avg Bid)
    $125
    4 entries

    Wanted, an expert coder with expert knowledge of Raspberry Pi, sensors and hardware connection, and communication. The...project: To remotely assist (using Team Viewer or similar) and backup our coder with the following: Monitoring of sensors for weather and industrial 4-20ma Communication using GSM Triggering of alarms Notifications via email/text

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    17 bids

    A PoC of a ball tracking computer vision system using the StereoLabs Zed camera. [login to view URL] The camera has a direct connection via USB 3.0 to a Linux machine. The machine has an i7 8th Gen processor, 16GB Ram, 256GB SSD and a GTX1070 Graphics card. The system needs to grab images from the camera (Left and Depth) at a rate of 100fps

    $3227 (Avg Bid)
    $3227 Avg Bid
    15 bids

    ...on TFT options & manage it • Two RS-485 serial communication channels, one as master MODBUS-RTU and the other as SLAVE MODBUS-RTU • I2C temperature sensor. • USB Host interface to connect an USB pendrive. 3. TFT CONTROLLER FIRMWARE The main purpose of this new firmware development is to migrate the existing TFT CONTROLLER application to a new powerful

    $8895 (Avg Bid)
    $8895 Avg Bid
    34 bids

    ...openings at the base for the RPi Zero board (ie. no SD card access, hdmi or usb holes), but I do need a couple thin ventilation slits on both ends (short sides) of the case. For the top, I need openings in the case for a slider toggle switch, a momentary button, a micro USB port, an RGB LED window, and a 3.5mm audio out jack. The case also needs a ring

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    32 bids

    ...@ 23.98, 24, 25, 29.97, 30, 50, 59.94, and 60 fps. OLED Output : 1920x1080 Mini-LVDS (Sony ECX335B OLED Microdisplay) or similar. HDMI Output : same as input. Power supply : USB-C 5v Maximum size : Approx. 30mm x 40mm (size is flexible but it must be as small as possible). We will also require a working prototype to be built (does not need to be the

    $609 (Avg Bid)
    $609 Avg Bid
    17 bids
    Trophy icon Instruction Card for a Product 4 days left

    ...to use if you want to start from scratch. In the images shown of my current attempt, the arrows in the picture are actually labels pointing to the locations of the buttons, usb port, and power switch so I think it might be good to include those labels along with the image. I prefer any attempts to begin from scratch and to add some creativity to it

    $29 (Avg Bid)
    $29
    17 entries

    The application (AP...order to make the Floor Announcement also. The APP will be install on a board running Android KITKAT 4.4 and should be able to handle low level Hardware modules such as GPIO,USB,SDIO, as well as high end peripherals such as Audio Codec ,WIFI and Bluetooth. Files with more details about the project will be sent in Privet message.

    $1008 (Avg Bid)
    $1008 Avg Bid
    21 bids

    I had developed an android app using Eclipse IDE.I had installed the app on an Android POS terminal through USB debugging. My laptop has been stolen last sunday and i don't have the source code for that app. I only extracted the app installed on the Android terminal (POS). Is there any way to retrieve the full source code of the app from the extracted

    $153 (Avg Bid)
    $153 Avg Bid
    21 bids

    I cur...the installed version is too old for downloading recent versions of the software from Apple, so I need some help for downloading a more recent version and create a booteable USB for installing it. According to the following picture this laptop support the last versions of OSX [login to view URL]

    $27 (Avg Bid)
    $27 Avg Bid
    4 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded soft...an external PCBA) 5) 2 Digital Sensors (Modbus) Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $1475 (Avg Bid)
    $1475 Avg Bid
    18 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded ...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $807 (Avg Bid)
    $807 Avg Bid
    7 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded ...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $920 (Avg Bid)
    $920 Avg Bid
    3 bids
    navigacia traktora 2 days left
    VERIFIED

    ...je to tento kod: [login to view URL]). Funkcia tohto opensource riesenia okrem ineho spociva v tom, ze na zaklade dvoch vstupov 1. raw measurements satellite data, ktore natahuje cez USB z externeho GPS prijimaca a 2. korekcneho signalu ziskaneho z internetu cez protokol NTRIP vypocita presnu GPS polohu pristroja (presnu myslim 2 cm a nie metre). Toto uz je vsetko

    $159 (Avg Bid)
    $159 Avg Bid
    7 bids
    PCB Design FTDI 2 days left
    VERIFIED

    Need to modify our current fully functional pcb design which includes 4 ftdi FT4232 chips. Need to add one additional FT4232 chip in same footprint and one usb hub chip controller. This is 4 layer board and size is is 56mm x 85mm. Please bid only if you have previous experience with ftdi chips.

    $189 (Avg Bid)
    $189 Avg Bid
    39 bids

    ...determine the other files that would need to be moved. Java programs and associated files to control a bill validator change python code controlling raspberry pi to control usb gpio/relay boards over serial communication. Harden OS for public kiosk application, (limit browser functionality, possibly by utilizing browser config file downloaded form

    $1316 (Avg Bid)
    $1316 Avg Bid
    20 bids

    This is a java desktop application using Netbeans IDE .Where the List of contacts in jTable and h2 database, from desktop GUI selecting either one or a group of cont...required to send SMS message,image and files to be sent to customer contact number from application user number. .the user mobile to be connect to pc port and send SMS via GSM modem.

    $90 (Avg Bid)
    $90 Avg Bid
    7 bids

    ...keypad - Output shall switch on/off relays - ESP32 shall be connected via GSM-modul (SIM 800L) to Internet (SQL database) - Prgramm coded with Arduino IDE - ESP32 shall communicate via MQTT to SQL - SQL database and MQTT Broker to be setup via Azure or AWS - Power saving mode esp for GSM modul shall be used (e.g turn off/deep sleep during certain times)

    $297 (Avg Bid)
    $297 Avg Bid
    15 bids

    Project requirement include the following: ***** Selecting a ready to use development boar...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $727 (Avg Bid)
    $727 Avg Bid
    13 bids
    Android image app 1 day left
    VERIFIED

    Must open an app where you start with choosing w...must be a small setting mark, where you can press end, at the end you must be able to export images to a usb when connecting usb to tablet. (Must be done with few clicks eg: 1. Click - exit 2. Click - select which folder 3. Click - export to usb 4. Click - quit tablet and thank you for using photobox!

    $1150 (Avg Bid)
    $1150 Avg Bid
    110 bids

    GSM is the most wide spread mobile communications system in the world. However the security of the GSM voice traffic is not guaranteed especially over the core network. It is highly desirable to have end-to-end secure communications over the GSM voice channel. In order to achieve end-to-end security, speech must be encrypted before it enters the GSM

    $203 (Avg Bid)
    $203 Avg Bid
    1 bids

    Project requirement include the following: ***** Selecting a ready to use development boar...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $871 (Avg Bid)
    $871 Avg Bid
    16 bids

    Project requirement include the following: ***** Selecting a ready to use development boar...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $2175 (Avg Bid)
    $2175 Avg Bid
    13 bids

    Bee scale: Components: - GSM module Arduino nano Dht 22 Load scale. Must receved SMS after call the module. more detail in privat

    $52 (Avg Bid)
    $52 Avg Bid
    12 bids

    ...is viewed New match If you are inactive for a long time Discounts / promotions Teasing (before launch) Payment module: - Credit card / visa - Mastercard - Maestro - Paypal - GSM provider! - What are the best options for using payments? Design of the app - The app must look simple but modern. But it should certainly not seem cheap and simple and function

    $1647 (Avg Bid)
    $1647 Avg Bid
    35 bids

    ...is viewed New match If you are inactive for a long time Discounts / promotions Teasing (before launch) Payment module: - Credit card / visa - Mastercard - Maestro - Paypal - GSM provider! - What are the best options for using payments? Design of the app - The app must look simple but modern. But it should certainly not seem cheap and simple and function

    $1776 (Avg Bid)
    $1776 Avg Bid
    28 bids

    Project requirement include the following: ***** Selecting a ready to use development boar...logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet and also with USB port. We are open to any suggestion, and the best suggestion would be considered.

    $1027 (Avg Bid)
    $1027 Avg Bid
    8 bids

    ... Since before I already have 1 network printer of same model. The 2 new printers has previously been installed in another network. When I search for them ( or plug in via USB ) no automatic detection is made - and I can not find printers when searching from Printer-Install-section. I have also not been able to add them by using TCP/IP-method. I run

    $27 (Avg Bid)
    $27 Avg Bid
    13 bids
    Complete Web Research Tasks 16 hours left
    VERIFIED

    ...towns in Florida: Naples, Bonita Springs, Estero, Fort Myers(Please do not include abnormally low rents) -Find out how to charge and connect USB devices like keyboards, mice, or other phones to a Xperia XZ via USB OTG without rooting the device -Find out how often data corruption occurs on BitLocker and VeraCrypt drives, both full system encryption,

    $33 (Avg Bid)
    $33 Avg Bid
    39 bids

    ...Additionally, we are currently using the camera on the Android device, however, I would like an option to select a secondary camera to use instead that will be plugged into the USB port of the phone or tablet. This would be a selection configuration in the interface, selected by a checkbox, radio button, or dropdown that the user would select. So to

    $635 (Avg Bid)
    $635 Avg Bid
    17 bids

    PLEASE NOTE: This is NOT a PCBA designing /development job. Project requirement include t...our company logo animation to be made as the boot animation. Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet or USB port. We are open to any suggestion, and the best suggestion would be considered.

    $694 (Avg Bid)
    $694 Avg Bid
    11 bids

    PLEASE NOTE: This is NOT a PCBA designing /development job. Project requirement inclu...Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output Firmware of the unit should be updatable through Internet connection either through WiFi or through ethernet or USB port. We are open to any suggestion, and the best suggestion would be considered.

    $576 (Avg Bid)
    $576 Avg Bid
    12 bids