Arduino 240v lights jobs

I need an expert in Python and Arduino (C++) code. The main task is to correct the Arduino code I already have. Currently, I am sending in string containing 80 characters or so like (<4, 100, 30, 200, 15, 100, 15, 20, 10>), from Python to arduino, however arduino is receiving 0 as the values for the ending like like (<4, 100, 30, 200, 15, 100, 0, 0, 0>). In the serial monitor it does receive the correct values. Here's what the job requires: - Review and correct the current Arduino code - Arduino MUST receive the correct values sent from Python - Adequate understanding of Python as values are sent from Python - Ability to provide suggestions for improvements would be a plus Ideal skills and experience: - Strong proficiency in Py...

I'm in urgent need of an expert to help with Arduino and SNMP integration for my IoT project. Key Requirements: - Immediate Assistance: I require someone who can start work right away and assist me in getting this integration up and running as soon as possible. - Arduino Expertise: You must be well-versed in programming and working with Arduino boards. Please provide details of your experience working with Arduino and integrating SNMP for IoT in your proposal. Prior experience with remote control and configuration of Arduino devices is highly desirable.

I am seeking an Arduino programmer with specific expertise in ESP32. The nature of this project requires the development of functionalities that can enable event scheduling in the ESP32 environment. Iot will send a schedule to the device. The schedule will look something like this CO2 2% 1 hour 20 minutes, CO2 0% 2 hour 0 minute, CO2 3% 1 hour 30 minute. The code already controls the CO2 levels to that percent. The problem we are having is running the schedule. So with the CO2 level there is a setpoint. That part works fine. You give it the setpoint and it maintains that level of CO2. However we need it to change the setpoint after x amount of time has elapsed and then change the setpoint again after another x amount of time has elapsed etc...We have a real time clock on the boa...

I'm looking for a proficient Arduino engineer to integrate and build a project revolving around proximity sensor integration. This project is centered around a 6 sensor counter setup. The ideal skills and experience for this job would include: -Strong knowledge in Arduino -Experience in sensor integration, specifically proximity sensors -Understanding of data logging and its applications Responsibilities will include: -Programming the Arduino to reflect sensor integration -Developing a setup to add 6 proximity sensors together into one counter -Assuring that data logging works optimally with the integrated sensors If you possess these skills and believe in delivering quality work, please submit your proposal. I look forward to working with you.

...project of a facade design and it requires some modifications. There are two key parts to this project you would be focusing on: 1. Adjusting Light Intensity and Positioning: - The positioning of the lighting needs modification. I'm looking for someone who can efficiently change the angle of the lights, to achieve the desired lighting effect. 2. Adding and Removing Lights from Key Facade Areas: - I require additional uplight and wall washers to be added to the design. - Some strip lights will need to be removed and the positioning of these should be changed. The ideal freelancer for this task is familiar with 3D max files, and has solid experience in lighting design. Please take note, the project deadline is by Sunday. I look forward to seeing you...

I'm seeking a professional with advanced Photoshop skills to add specific interior elements to a base image. These elements include lights, doors, panelling, and tiles. * Understanding and Adding Elements: You'll use your keen eye for detail and spatial awareness to cleverly insert these elements into the image to enhance its visual representation. * Image Sourcing: Rest assured, I already have the required images of each item to be added, which I will provide to you. The ability to effectively incorporate these specific images is paramount. Ideal Candidate Skills: * Masterful Adobe Photoshop command. * A keen eye for interior design aiming for realism. * Experience in incorporating items into an existing environment seamlessly. This project aims to enhance the base...

I'm looking for a designer with a strong knack for minimalist yet elegant design, and who can creatively infuse a Mexican touch to it. I require a name, a card design, and a logo for my balloon with led lights business, given primarily for special occasions. The ideal designer would: - Have previous experience in the aesthetics of minimalism and elegance. - Possess an understanding of Mexican design elements. - Have a deep understanding of branding and logo creation. - Have prior work showcasing their creativity in developing business names. This project aims at creating a standout name, card design, and logo that not only reflect my business ideals but also captivate the target audience. Remember, I'm looking for only one design at this point. If the results are of hig...

I am currently seeking an Arduino expert to enhance a project focused on indoor people detection. The primary objective involves refining a photoelectric sensor system. Key project requirements are as follows: 1. Specific functionality: The system must accurately detect and identify individuals within an indoor environment. 2. Sensor sensitivity: The sensors should effectively detect people while minimizing false positives caused by small, irrelevant objects. The ideal candidate for this project should possess: Extensive experience in Arduino-based development, particularly with photoelectric sensors. Proficiency in testing the system for accurate people detection and troubleshooting any potential issues. Knowledge of human body detection algorithms and sensor tuning woul...

Help me with the software code and wiring for a Arduino. 1. turn the motor(hydraulic pump) forward and sense the currrent as it ramps up to 170mA and stops. 2. turn the motor in reverse and monitor the position sensor.

...with RFD900A device. * The send and receive will be handled simultaneously. * Received data will be displayed on screen as text, hexcode or in binary form depending on user selectable option. * Received data will be saved into a file. User shall be able to enable or disable this option. * User will be able to define the log file name. * App will transmit data typed from a keyboard (similar to Arduino terminal) or should be able to select a file to read and transmit. * User will be able configure the serial port (i.e. select com port, baud rate (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 256000, Custom) , data bits (5, 6, 7, 8 bits), parity (None, Odd, Even, Mark, Space), stop bits (1, 1.5, 2), handshaking (None, RTS/CTS, XON/XOFF, RTC/CTS+XON/XOFF, RTS on TX) etc.) *...

I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.

I'm looking to create a 3D rendering of a basement bachelor style apartment, primarily for the purpose of marketing in the booming real estate sector. I have a clear vision of a minimalist design style for the rendering that would attract the modern-day buyer. Finishes will be... - white walls and ceiling with pot lights - light grey vinyl flooring with wood pattern - dark hardware (door knobs) with all white cabinetry in kitchenette - stainless steel fridge Ideal candidates for this project would have prior experience in creating 3D renderings, with an eye for minimalist design and a solid understanding of the real estate market. Proficiency in utilizing top-tier 3D rendering tools is key, as well as the ability to effectively highlight the requested areas of the basement ba...

...regulate voltage to 6VDC, with a max current of 500mA. This circuit will be powering LED lights and should be compatible with an input voltage range of 12-24VDC. The circuit should also account for the presence of 4 diodes. - 4 Diodes - forward V - 8V limit to 7V max - max operating current 500mV - inline switch to turn any of the diodes in circuit on/off - need an LED in line for each Diode if active or blown ( when diode fails it is shorted 1ohm) Key requirements and considerations include: - Voltage regulation: The primary functionality of the circuit is to regulate input voltage to 6VDC for optimal LED power. - Current capacity: The circuit should handle a maximum current of 500mA, ensuring the LED lights operate efficiently. - Input voltage range: The circuit nee...

...SLAM system, leveraging Raspberry Pi 5, 2D Lidar and Arduino Uno/MKR 1010 WiFi as part of my college project. Key responsibilities will be to aid in motor control and visualizing real-time Lidar data. Specific requirements include: 1. Implement FastSLAM algorithm – You will need to have a thorough understanding and experience in implementing this particular SLAM algorithm. 2. Utilizing Python – All coding tasks should be performed using Python. 3. Deliver Real-time Lidar Data Visualization with: - Map Display: A real-time map should be drafted using the Lidar-scanned data. - Moving Trajectory: Display the accurate position and movement trajectory of the SLAM system. Having a background in working with Raspberry Pi and Arduino, while specializing in...

I'm in need of an electrical engineer with expertise in lighting layouts that optimize the use of space. This project involves a small apartment of 180 sqm, which requires creative positioning and installment of various fixtures, based on a furniture layout. Key Req...electrical engineer with expertise in lighting layouts that optimize the use of space. This project involves a small apartment of 180 sqm, which requires creative positioning and installment of various fixtures, based on a furniture layout. Key Requirements: - Proficiency in crafting bespoke solutions for small spaces. - Experience with diverse lighting fixtures like spotlights, hanging lights, and rail lights. - An in-depth understanding of how to utilize each type of light for the correct purpose in ...

I am seeking an experienced Arduino coder for my robotics project. The primary task involves coding for a robot that specializes in collecting tennis balls from the ground. Key tasks and responsibilities: - Sensor-based detection: The robot needs to be able to identify and pick up tennis balls from the ground using sensors. Your code should enable the robot to execute these functionalities efficiently. I prefer if you have: - Proven experience in coding with Arduino, especially in robotics. - Detailed knowledge and experience in sensor-based detection systems. Your role in this project is vital for the operational success of the robot. Please only bid if you're confident in your ability to meet these requirements.

I'm hosting an indoor party that requires a mix of static, moving head, and laser lights to create an electrifying atmosphere. The venue is medium-sized, between 100-500 sq. meters. The ideal candidate should: - Have experience in setting up party lighting systems, especially for Rave events. - Be able to work with a medium-sized venue to provide suitable lighting options. - Possess the necessary equipment for static, moving head, and laser lights. - Understand the importance of creating a dynamic and engaging lighting experience for a party setting. If you have experience with lighting design and implementation for high-energy events, I'd love to hear from you.

I would like to hire a developer that is familiar with coding C++ on an Arduino platform. Project Description: - Control a poker game via addressable LED light strips & buttons for each player, including the dealer. I have a flow chart built for the functionality I am looking for (see attached pdf) and the effects I want to happen once certain conditions/states have been met. Hardware details: - W2812B LED Strip - Individually Addressable 16.4ft, 60 pixels/m - DC5V - AC100-240V to DC5V/30A Power Supply - Max 150W - Arduino Mega 2560 R3 - (10) Push-Button Switches I would ideally like this to be completed within the next few weeks. We can lower the complexity if that will make it more feasible / less buggy. Thank you!

...than 30 seconds in duration. - Activate a solenoid latch: This component is crucial as it performs a critical function in the project. The solenoid latch should be triggered once the motor is on and the music is playing. - Stop the music and motor: Once the solenoid latch has been activated, the MP3 player and motor should stop automatically. Ideal Skills and Experience: - Proficient in Arduino or any other microcontroller programming - Previous experience in working with motors, MP3 modules, and solenoid latches - Familiarity with crash sensor micro switches and their implementation - Strong problem-solving skills to troubleshoot any potential issues - Ability to deliver a clear and well-commented sketch for future reference. If you have the expertise, creativity, and ex...

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

I will design arduino project for distance measuring in ultrasonic sensor

I'm looking for an experienced IoT developer who can create an Arduino-based system that triggers actions or alerts based on scraped text data from a website. Key Responsibilities: - Develop a system using Arduino, Raspberry Pi, and ESP32 microcontroller - Implement website scraping functionality to extract specific text content - Design a mechanism to trigger predefined actions or alerts based on the scraped data Ideal Experience: - Proficient in Arduino programming - Familiarity with ESP32 microcontroller and Raspberry Pi - Experience with website scraping techniques - Ability to integrate scraped data to trigger actions or alerts on an IoT system Please note that my preferred programming language wasn't specified. Feel free to suggest the most appropri...

I'm in need of an experienced Dialux Evo specialist who can help me design a room. This project has three core requirements which are: - Lighting Simulation: The room should have a mixed lighting set-up to allow me to see how both natural and artificial lights interact in the space. - Energy Analysis: I'm looking to understand the energy efficiency of the lighting set-up and need to have an in-depth analysis report. - Interior Visualization: I also need a realistic interior design visualization of the room. The room to be designed is of medium size, between 100 - 500 sq ft. Skills needed: - Proficient in Dialux Evo software - Expert in lighting simulation and energy analysis - Ability to create realistic interior visualizations - Strong communication skills with the a...

I'm searching for a proficient Arduino coder, to support in integrating dc motor driver, lcd20x4 with I2c and inductive proximity sensor into my existing project. The primary goal is to control 2 dc motor simultaneously. Key requirements for this role include: * Proficiency in Arduino coding * Vast experience with sensor integration, specifically using inductive proximity sensors * micro controller

I'm looking for a developer who can help me transfer specific data from my website to an Arduino board. Key Requirements: - I need the betting results from my site to be sent to the Arduino. - This should occur every 1 minute, making it almost real-time. The Ideal Candidate: - Should have experience in data transfer between websites and Arduino boards. - Familiarity with real-time data transfer techniques would be a plus.

I'm in need of an experienced Arduino programmer, with a strong background in integrating sensors and controlling motors. Key project tasks: - Integrating a motion sensor with my Arduino - Managing control of a DC motor - Setting up data logging functionality - small servo motor controlling and calibration Ideal Skills: - Proficiency in Arduino programming - Prior hands-on experience with motion sensors and DC motors - Familiarity with data logging processes is a plus! If you have the right skill set, I'd love to connect and further discuss the project details. Making a simple servo motor controlling and switching between dc motor and servo motor by and e bike throttle bar

...levels within the trailer using LDR. The system will track motion within the trailer using PIR sensor. Using the information above, the system will automatically turn on the lights of the camper when the ambient light is low and there is detected motion. The camper's lights are standard 12DC lights (not LEDs). When there is no motion for 5 minutes or the ambient light reaches a given threshold, the lights will turn off. There must be a manual way to turn on/off the lights without turning the system off. This will be done with button inputs to the microcontroller, that the user can push and the system will turn and keep the lights on/off accordingly regardless of the status of the sensors. Display the status of the system on the ST7735 LCD ...

I'm in need of an adult-sized mythical dragon costume. The focus is on creat...Adult-sized: The costume should fit an average adult. - Mythical style: I'm looking for a costume that resembles a mythical dragon. - Wings: The costume should include a pair of dragon wings. - LED Lighting: Incorporate LED lights into the design to bring the dragon to life. Ideal skills and experience include: - Costume design and creation: Experience in designing and creating detailed costumes is crucial. - Knowledge of mythical creatures: An understanding of mythical creatures and their design is preferred. - LED lighting integration: Ability to integrate LED lights into the costume in an aesthetically pleasing way. - Attention to detail: The ability to focus on intricate, hi...

I have a hub dynamo installed on my bike and I'm looking for someone to wire it up to power both front and rear lights, as well as a USB charging port. I'd like the setup to be ready ASAP. Located South London. Key requirements include: - Wiring the hub dynamo to power both lights and a USB charging port - Ensuring the lights are correctly set up for front and rear - Installing the USB charging port in a convenient and accessible location It's important that the setup is both functional and durable. I'm looking for a professional who has experience working with bike dynamos and electrical systems. Experience with USB charger installations is a plus. Needs soldering experience and be able to do

More details: What type of GIFs would you like to create? Video to GIF What should be the maximum duration for the GIFs? Less than 10 seconds Should the GIFs have sound? No I nee...simple GIF describing a car accident happened on a freeway. Picture from above. We see freeway, car pool lane is empty, all other five lanes are packed with the white cars, moving close each other in traffic, in the middle of left lane close to car pool there’s a black car, four cars behind is a red suv car. In same lane two cars ahead of black car is yellow car on flashers. Black car, showing turn lights changes lane to car pool lane, red car changing lane in the same time but with a much more speed changing lane to car pool lane too and impacting black car from behind. 10 seconds gif, more detail...

PROJECT DETAILS: At home, I have small server running "Home Assistant" with "ESPHome" Add-on and multiple sensors like DHT22 for Temperature and Humidity, PMSX003 for Air Quality, Shelly 1 Switches to control some lights, couple of 5V relays with ESP32 to control other equipment, PIR sensors for the lights in the garden and few others as well as my Home Security. All sensors are attached to ESP32 modules and transmitting the data using Wi-Fi to the Home Assistant server. The data from all of the sensors is displayed on my Dashboard using various "Cards" and "Dashboards". All of the above has been perfectly working for years and I haven't had any issues with. The goal of this project will be to attach small 1.3" TFT dis...

I'm seeking a skilled Arduino developer for a basic level robotics project. The primary tasks for this role will include coding and troubleshooting hardware. Key requirements: - Skilled in writing Arduino code - Able to troubleshoot hardware issues - Experience in basic robotics projects The purpose of the project is to create a basic level robotics system using Arduino, which involves simple movements and operations. The ideal candidate will have a good understanding of robotics, and experience in designing circuits would be an advantage.

...professional to design outdoor signage that focuses on minimalist aesthetics. This will significantly aid me in branding my business. Easy and simple design This sign will be on top of a stationary food truck, we need it to capture the attention of people driving and walking by. Sample example with the size and working attached. This will be printed on wood or metal and then attached with lights shining on to it at night Key Requirements: - Must have extensive design experience, particularly in crafting outdoor signs. - Deep understanding of the minimalist style is essential. - Previous work on branding projects is a great advantage. - Ability to communicate the essence of a brand effectively using minimalist elements. Target: - Design that is recognizable and can effe...

I require a specialist to implement a sensor data logging system using Arduino/ESP32. i Required candidate who have experties in aurdino / ESP32 and rotary encoder. Necessary Skills: - Comprehensive understanding of Arduino/ESP32 - Rotary encoder It's vital that the system be designed accurately to fulfill the need for reliable data storage. An understanding of data management and the capability to create systems for future data analysis is crucial. A background in similar projects would be greatly advantageous.

Please Sign Up or Login to see details.

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

...experience for the audience and artists. Key Responsibilities: - Designing and implementing lighting concepts that are suitable for a small stage setup, specifically for concert use. - Utilizing spotlights, color washes, and moving lights effectively to create visually engaging effects. - Setting up appropriate lighting cues that align with different musical moments and enhance the overall performance. Ideal Skills and Experience: - Proven experience in lighting design, particularly for live music events. - Proficiency in working with spotlights, color washes, and moving lights. - Ability to understand and enhance the dynamics of a musical performance through lighting. - Strong creativity and attention to detail. - Understanding of safety protocols and best practices in ...

I have been developing a arduino type hmi using a nextion touch screen, arduino mega, arduino nano esp32 for wireless control and a waveshare esp32 touchscreen for the remote. I have written all the code but am needing help figuring out why the commands are not working as they should.

...in need of a talented designer who can create a custom case for a digital stop watch that will primarily be used for sports timing. Key Requirements: - The case should have an ergonomic grip, similar to that of a Seiko S141. This is crucial for comfortable handling during sports activities. - The design must be compatible with micro boards, a battery, and an OLED display. I would like to use Arduino pro micro and a small 1.5" display Ideal Skills and Experience: - Proficiency in product design and CAD software to develop the case model. - Prior experience in designing sports equipment is highly preferred, to ensure the final product meets the specific requirements for this kind of usage. - Knowledge of materials to be used in manufacturing for both durability and comfort. ...

I am in need of a skilled Arduino programmer, with experience specifically in robotics programming for educational purposes. The project has an intermediate level of complexity, so a solid understanding and the ability to problem-solve and code efficiently will be crucial. Ideal Skills: - Arduino programming - Robotics programming - Educators and student-user centered design Given the nature of the end-users, it would be highly beneficial if the freelancer also has experience in creating user-friendly interfaces and can foresee potential challenges that educators or students may face. Your technical expertise will be expected to translate into an accessible and engaging project that fits the educational context.

I'm in need of a skilled electrician or technician who can help me install various types of stage lighting equipment in a small venue. Key Responsibilities: - Assist with installing LED lights, spotlights, and moving heads - Ensure proper wiring and positioning according to the venue's layout and requirements - Troubleshoot any technical issues that may arise during the installation process Ideal Skills and Experience: - Proven experience in installing and working with stage lighting equipment - Electrical background or certification is a plus - Familiarity with small venue lighting setups and configurations - Attention to detail and ability to work efficiently Please provide examples of your past work with stage lighting installations and any relevant certifications y...

I'm seeking an experienced Arduino developer with a strong background in SNMP integration to assist with my IoT project. While I haven't detailed the specific tasks for the Arduino sketch, I need someone who is able to create a comprehensive program that meets the needs of my project.

I am seeking talented freelancers to develop an Arduino UNO bluetooth car for my personal hobby project. It requires expertise in Arduino programming and physical assembly of the car kit. The specific features I want are: - Directional movement: The car should smoothly move forward, backward, left, and right via remote bluetooth controls. - Speed control: The speed of the car should be adjustable. The ideal size I'm seeking for the car is medium, neither too compact nor too large. Experience with remote control vehicles and Arduino, as well as understanding of bluetooth technology, will be a plus for this project. I am looking forward to your innovative design submissions and technical solutions.

I'm in need of an experienced programmer who is well-versed in Arduino code. This project demands a particular set of skills: * Proficient in Arduino coding with a focus on device communication. * Comprehensive understanding of stepper motors functionality and their interaction with Arduino. * Ability to program Arduino to communicate and effectively control two stepper motors. The delivered coding should achieve seamless communication between Arduino and the stepper motors. Please take note of the quantity of stepper motors to control - two in this instance. Qualified bidders will be well-experienced in Arduino and stepper motors, able to discuss technical requirements with clarity, and pride themselves in delivering accurate, reliable cod...

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

I need a Vissim expert to simulate a signalized intersection using COM server. The simulation will have to follow specific conditions based on data from queue counters. - The simulation will need to adjust signal times and states in response to average queue length. This means that the traffic lights should change based on the average number of vehicles waiting at the intersection. - The primary expected output of the simulation is a detailed traffic simulation report. This report should provide delay, queue length dissipation time. Ideal skills and experience for this job: - Proficient in Vissim and working with COM server. - Experienced in traffic simulation and intersection management. - Ability to interpret data from queue counters and translate it into Vissim parameters. -...

I'm looking for a skilled ...coordinates in a temperory queue and Send them every 5 Sec. 5. Along with GPS also send Speed information. // Push coordinates API contract Data Structure :- <TrackerId> : { coords: [ { loc: [<lat>,<long>], Speed: 14 }, ... ] } Result : 1. Steps to deploy code to A9G module 2. How to change GPS coordinates recording frequency Ideal Skills: - Arduino Developer - Understanding of developing custom GPS tracking solutions - Experienced with the Ai-Thinker A9G GPS/GPRS module - Strong understanding of real-time tracking and speed measurement technologies - Excellent problem-solving skills for effective communication method implementation. If you have the necessary skills and...

... intended for indoor use. This design will incorporate an electrical start stop button equipped with LED indicator lights, adjustable speed control, and an emergency stop feature. Key Features: - capable to be mounted over stairs to get luggage from bottom to top or reverse luggage from top to bottom of stairs - Weight Capacity: The ramp should be able to handle loads up to 200 lbs, ensuring it's sturdy and reliable for everyday use. - Indoor Use: This device will be used in a home environment, so it should be compact, easy to maneuver, and suitable for indoor use. - Electrical Start Stop Button: This feature is crucial for user control and safety: - LED Indicator Lights: These will provide clear feedback to the user, improving usability. - Adjustable Speed Co...

IOT is being used a lot these days to provide functions that were being done before manually. We are also embarking on the same journey and looking for a potential person who can help us with our proposed system. Thank you

I require an expert with advanced 8086 assembly program skills to develop and rigorously test effective operability of a robot. Key Deliverables: - Creation of an 8086 assembly program capable of controlling a robot. - Ensuring seamless execution of controlling the robot's movements (forward, backward, left, right). - Enabling the robot to handle basic functions like turning on and off lights. Skills Required: - Excellent knowledge and experience with 8086 Assembly Program. - Proven experience with robotics control programming. - Strong understanding of external device manipulations.