Diy arduino shield pcb jobs

Change the position of CC1101 and then change the size of the enclosure

As the project owner, I require an Arduino Uno code, specifically designed to interact with a fingerprint reader for input, LCD and 14 relays for output. Key Requirements: - The code should identify 14 people's fingerprints (let's say 2 different fingerprints for each person), write the name of that person on the LCD and activate the corresponding relay for each person. - The associated relays will control a particular robotic device. - When an unrecognized fingerprint is scanned, the system should write on LCD "unrecognized fingerprint" without triggering any relay. Ideal Skills and Experience: - Proficiency with Arduino programming - Experience working with fingerprint readers - Knowledge of relay and robotic systems . Familiarity with sensor integr...

I have a project that requires setting up an 8 Channel Arduino Relay Module and programming it to operate using a basic 4 button hand controller. My Arduino board of choice is the Arduino Uno. For the hand controller, I need different functionalities: - Each button should be able to toggle a specific relay on and off. - Certain buttons should cycle through a sequence of relays. - Some buttons should have the ability to control a combination of relays. Importantly, only 1 relay should be controlled at a time. The ideal freelancer for this project should have a deep understanding of Arduino programming, particularly with Arduino Uno, and experience with relay modules and controller setup. Familiarity with creating flexible, customizable controls is a p...

We are seeking a highly skilled PCB designer to develop a custom board featuring the RP2040 microchip to control multiple DC motors and MOSFETs, with integrated voltage regulation. This project requires expertise in high-power applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design files ready ...

Here is a brief description of my project. (Please note: I will not reply back to auto response messages. Also please post the actual price not a price just to get my attention.) My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof...

...individual to create an innovative IoT solution utilizing an Arduino board and camera module, along with UPC scanning software. This project involves developing a UPC scanner that can accurately read the UPC on a product. Upon scanning, the information of the scanned product such as date, time, UPC, product name and product retail should be transmitted and populated into a web application. Key Tasks: - Develop and integrate the UPC scanning software to be used with the camera attachment for the Arduino board. - Establish a Wi-Fi connection for the Arduino IoT UPC scanner to communicate with the web app. - Ensure accurate transmission and population of the scanned product information in the web application. Ideal Skills: - Proficient in Arduino programming a...

I am in need of an experienced PCB designer who can create a small PCB module with the following features: - ESP32 - SIM module - Gyro - Battery backup with charging port Ideal skills and experience for this job include: - Extensive experience with ESP32 and SIM modules - Proficiency in PCB design software - Knowledge of battery technologies suitable for motorbike use - Understanding of gyro and sensor interfacing - Ability to design a compact PCB (less than 5cm x 5cm) Please provide samples of your past PCB designs in your bid.

I need an expert in Arduino programming to develop a code that connects to an OV7670 camera, recognizes specific patterns (like a person's head) and triggers an LED. Key Requirements: - Use an Arduino Uno or Nano to interface with an OV7670 camera and LED. - The code should have a pattern recognition feature - specifically, recognizing a person's head. - When the pattern is detected, the LED should light up to indicate an event has occurred. Additional Details: - The code should be able to differentiate a specific pattern (a person's head) from other objects or patterns that may be in the camera's view. - This is an intermediate level project, hence the recognition should be accurate enough to detect the specific object. Ideal Skills: - Proficiency in ...

Advise as to whether vs code or arduino ide would be more suitable Complete a project containing the various pages of code, organised and zipped, ready for unpacking and modification/use. //* comment heavily, briefly explaining the features as you go. Use caps lock for anything that requires editor attention or input. Intended for hardware devices: • Xiao Esp32-S3 Sense (I call 'sense') • a small bulb such as this: • ESP32-4848S040C_I_Y_3 (I call '484') • a small speaker, such as this: Each sense should be assigned the placeholder for 2 micro servos. So if a new sense is selected via the 484 at any time, it is assigned a light as well as 2 servos. No functionality is currently required of the servos but the coding should

I'm seeking a PCB engineer who's proficient at PCB layout design, circuit analysis and troubleshooting, and component sourcing. The project entails: - PCB Layout Design: The project calls for a standard size, multi-layer PCB. The ideal candidate should have the ability to design and implement PCB layouts that are both efficient and effective. - Circuit Analysis and Troubleshooting: The successful candidate will need to be able to analyze and troubleshoot circuits efficiently. They should be knowledgeable in a variety of circuit types and be able to deal with complex circuits. - Component Sourcing: The project also involves sourcing the necessary components for the PCB. The right candidate should be able to locate quality parts and ensure...

I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM

I’m looking for a professional to review and optimize my PCB layout design. The aim of this review is to identify any design errors, ensure proper component placement, and validate the power and ground connections. Key tasks include: - Identifying design errors: Your role is to meticulously go through the PCB layout and spot any potential design flaws. - Checking component placement: It's crucial to ensure that all components are correctly placed and oriented as per the design requirements. - Verifying power and ground connections: A thorough check on power and ground connections is vital to eliminate potential circuit issues. Your expertise in PCB layout design, analysis tools and techniques will be a valuable asset for this project. Experience with simil...

I am in need of a professional who can efficiently handle an RS485 device that requires reconfiguration. The scope of...converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necessary. Please only bid if you are confident with this job, have relevant experience, and can deliver the projec...

I am looking for someone skilled in the field of STM32 programming, with expertise on Wiz5500. We already have a working firmware running on our custom PCB that uses the Wiz5500 to display a web page with basic interfaces. The project consists in modifying that firmware to integrate two new features : 1) After sending data from webpage to mcu, we cannot use the web browser refresh button because it re-sends the data again. We want to fix this by either re-directing automatically to the main webpage after sending data or some other way you can propose. 2) We want to synchronize the mcu with the local time. This can be done by synchronizing with the NTP server or some other way you can propose. We would like the webpage to keep working during the synchronization with NTP serve...

I'm seeking a creative graphic design professional to create a modern style logo for my online brand that sells Lego-style models. Key points: - Proficiency in modern design techniques is a must, as I want the logo to embody a trendy, up-to-date aesthetic. - Please provide credible evidence of prior experience. This will include but not be li...must, as I want the logo to embody a trendy, up-to-date aesthetic. - Please provide credible evidence of prior experience. This will include but not be limited to, previous logos you've designed or brands you've worked with. - Creativity in the use of colors and forms is a plus. Be ready to dazzle with innovative yet relatable designs. Attention to detail and an understanding of the Lego and DIY culture would give you an a...

...background in measurement systems particularly using load cells and load cell amps and basic platform development. The objective is to develop a project which measures loads within a range of 10-20kg , with data input to an Arduino microcontroller. The ability to configure an edge device to continuously stream data to a simple BI dashboard on a desktop is also required. The successful freelancer should have the following skills and experience: - An excellent understanding of load cells and how to operate and interpret readings from them. - Extensive experience using Arduino microcontrollers and able to proficiently program and troubleshoot them. - Knowledge on how to integrate an edge device with this setup, and the skills needed to stream data to a BI dashboard. -Should...

I’m looking to make a smart controller that can integrate with 12v compressors for inflating tires on off road vehicles. Mainly I need the the pcb and electronics designed and I can make the housing and everything else. If you would also want to design the housing in ok with that. Needs to be almost waterproof. Mainly splash proof and heat resistant. It will be mounted in the engine bay. As far as the controller goes all it need to be able to do is check pressure from a pressure sensor that will be connected in line from the compressor and control a 12v output source(5a at 12v) to trigger the compressor to turn on as well as for deflating need a valve to be controlled to air down to set pressure. Looking for keep it as simple as possible. Only gonna need about 4 buttons. Maybe...

Hi, I need 5 to 6 Backlink insertions on EU / USA websites, purely related to PCBA / PCB / Electronics. Domain Ranking of matching sites should be equal or above DR +60 and Monthly Traffic (MT) should be equal or above 20K. Share price per link insertion. Do not apply if your sites do not match my requirements similar to site

Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where it cam...

knights get out of shield

I'm in need of a skilled PCB designer to create a design for a straightforward electrical device focused on temperature control. Key Details: - The main function of the device is temperature control. - I already have in mind the components that I need for the device such as temperature sensors, and cooling/heating elements. - The desired temperature range for the device to control is around 40°C. Desired Skills and Experience: - Proficiency in PCB design, particularly in the context of temperature control devices. - Experience in working with temperature sensors and cooling/heating elements. - Understanding of the thermal dynamics and the design constraints of temperature control devices. - Ability to bring this project to life in a timely and cost-effective manne...

I'm looking for a skilled PCB designer to help me repurpose an old laptop keyboard and monitor to work via a desktop host. Key Project Features: - **Repurposing Old Hardware**: The main aim of this project is to make use of an old laptop's keyboard and monitor. The PCB should make it possible to connect these to a desktop host. Ideal Skills and Experience: - **PCB Design**: You need to have a strong background in designing PCBs. It's crucial that the PCB you design supports USB and HDMI connectivity, and allows for key mapping and backlight control for the keyboard integration. - **Embedded Systems**: Experience with embedded systems is a big plus as it helps in seamlessly integrating the keyboard and monitor to the desktop host. - **Hardware...

I am personally embarking on my master's project, necessitating an expert in Altium for a basic PCB layout design. While the overall complexity anticipated remains on the basic side with limited components and layers, the designer's prowess in utilizing Altium effectively will be respected and appreciated. Skills and Experience: - Mastery of Altium software - Proven experience in PCB layout design - Affinity for crafting basic designs with few components and layers.

...accesss via male connector (compatible with Raspberri Pi) These are the main requeriments, maybe other minor will appear during the design. I can provide schemas for all the parts involved (can bus, LVDS, AIS,...). The job consist in the design of the board merging all schemas in one, and generate all the files needed by JLCPCB or oher manufacturer to produce the board. Ideal skills & experiences: - PCB Design and Raspberry Pi familiarity - Hardware architecture knowledge - CAN protocol and USB/Ethernet port integration - LVDS and PCI express slot integration....

I'm in need of an ESP32 BLE application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific requirements of this project.

I'm in need of a skilled Arduino coder to create a custom code for me. My project primarily involves generating variable frequency range FSK sine wave output. Key Requirements: - Develop code specifically for Arduino R4 board + SD card module - Generate sine waves of different frequencies - Different frequencies - 10,000 different frequencies (integers) - eg: txt file (100,200,300,400,500.................n integers) Frequencies list are stored in a SD card CSV or txt format Arduino new R4 boards has built-in DAC for sine wave generation with ready made library as follows: Code for wave generation --->>> analogWave wave(DAC); int freq = 10; // in hertz, change accordingly void setup()...

We're seeking an individual who can help develop a BLDC motor circuit (with IR / RF) also capable of reverse engineering and conducting comprehensive analyses of each component and functionality, and redesigning them to improve performance and efficiency, someone who can design a working PoC and demonstrate their mastery of the redesigned circuit. - Multi-layer PCB Design - Reverse Engineering - Extensive knowledge of Digital Electronics - Experience working with brushless motors. - Firmware development/coding skills (c, c++, assembly or similar skills) - working knowledge of multiple ICs Once the project is completed, along with the BOM file and GARBER file, the PoC project also has to be submitted. IMP: Freelancers must sign an NDA before beginning to work on the project.

As the owner of a WordPress site, I am off to improve several key areas. I'm emp...improve several key areas. I'm emphasizing: • Site Speed: My website's page loading speed requires optimization to grant a smoother, faster browsing experience to my visitors. • Mobile Responsiveness: While the specifics weren't elaborated, the need is for a responsive design that ensures optimum performance on all devices. • Site Security: The addition of firewall protection is mandatory to shield my site from unwanted breaches and potential cyber threats. The ideal bidder will be versed in WordPress performance optimization, mobile responsiveness, and cybersecurity. An expertise in implementing firewall protection is highly sought after. Let's amp up my Wo...

...- For gourmet foods or kitchen gadgets. Adventure Awaits - For travel and outdoor gear. Game Galaxy - For video games and gaming accessories. Study Spot - For educational tools and books. Fitness Front - For workout gear and fitness equipment. Zen Zone - For relaxation and meditation supplies. Holiday Haven - For seasonal products and holiday decor. Craft Corner - For DIY supplies and crafting materials. Style Studio - For stylish home and fashion pieces. Ideal freelancer will present: - Proficiency in Shopify - Demonstrable knowledge of SEO - Aptitude for creating Gen Z-focused product descriptions and collection titles - Ability to identify current industry trends - Knowledge in creating collections based on category and demographic target. Bu...

I currently have Wowza installed and I need expert assistance to shield my HLS streams against unauthorized use on other platforms. Key Tasks: - Configure HLS stream protection on my existing Wowza setup Required Skills and Experience: - Proven expertise in working with Wowza - Prior experience in protecting HLS streams Application Requirements: Please share prior work that shows your ability to successfully handle tasks related to the current project. Emphasize relevance and results achieved. My final output must be HTTPS and protected.

I'm looking for a skilled and experienced electronic engineer who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your p...

I'm seeking an expert in LabView, Arduino programming, and their integration. The aim of the project is to create a system for industrial automation and prototyping that includes: - Real-time data monitoring - Designing a user-friendly interface - Automation and integration of microcontrollers You should ideally hold substantial experience in LabView development and Arduino programming. Your experience should encompass integrating these platforms and implementing the features mentioned above. Knowledge in integrating various sensors into this type of system and achieving real-time data monitoring will be crucial to this project. Any previous work with industrial automation and prototyping will certainly be beneficial.

I've nearly completed a PCB layout using Altium Designer, but need help finalizing it. Key Requirements: - Adding an "On/Off Button": I need an experienced designer to integrate this feature into the design. This will require a deep understanding of PCB layout and design principles to ensure it's correctly implemented. Ideal Skills: - Proficient in Altium Designer: You must have a strong background in using this software to work on the incomplete PCB design. - PCB Design Experience: A solid grasp of PCB design principles and best practices is essential to successfully finish the layout. - Previous Completion Projects: It would be beneficial if you have a track record of completing PCB designs. By taking on this project, you&...

...comprehensive learning plan intended for various age groups from Kindergarten to college. This curriculum should encompass three main areas: 1. Coding: Should cover various programming languages including Python, Java and foundational learning platforms like Scratch, as well as MIT App Inventor for app development. 2. Robotics: The curriculum should also touch on different robotics platforms - from Arduino, LEGO, VEX, Sphero to Raspberry Pi. 3. Media Arts: In addition, I want to integrate media arts, where students can learn graphic design, animation, videography, and web design and development. Ideal candidates should have extensive experience in pedagogy and skill development in these areas, and be able to create an engaging, age-appropriate curriculum for students acros...

I'm in need of an experienced PCB designer who can modify a trace routing on a PCB gerber file. The specific requirement is to interrupt one of the traces, but ensure it can be easily jumpered. Key Requirements: - Expertise in PCB design and Gerber file modification - Ability to efficiently modify trace routing while maintaining the original design integrity - Understanding of how to create a jumper-friendly trace interruption Ideal Candidate: - Prior experience with similar trace routing modifications - Great attention to detail and an understanding of the importance of trace integrity in PCB design - Ability to communicate effectively to ensure the requirements are fully understood and implemented

This is an extended version project of previous AMS5915 Pressure Sensor PCB with integration to extra features

This project consist of following phases for its prototype development. Phase 1. Hardware Design 1. Schematic design 2. PCB Design 3. BOM (Bill of material) , PCB Gerber 4. PCB Fabrication 5. Components/Part procurement 6. PCB assembly Phase 2. Firmware/Code development and PCB testing Deliverables will be as given below: 1. Source PCB files 2. PCB Geber 3. BOM (Bill of material) 4. Source firmware 5. One working Prototype

We're seeking an individual who can help develop a BLDC motor circuit (with IR / RF) also capable of reverse engineering and conducting comprehensive analyses of each component and functionality, and redesigning them to improve performance and efficiency, someone who can design a working PoC and demonstrate their mastery of the redesigned circuit. - Multi-layer PCB Design - Reverse Engineering - Extensive knowledge of Digital Electronics - Experience working with brushless motors. - Firmware development/coding skills (c, c++, assembly or similar skills) - working knowledge of multiple IC's Once the project is completed, along with the BOM file and GARBER file, PoC project also has to be submitted. IMP: Freelancer must sign an NDA before begin working on the proje...

Create PCB with eps32 and relay in Easy eda

...it with a 4G mobile module (SIM7600 or equivalent that work in Australia/Telstra). - 1 X Sim slot. - 2 X External antenna connectors SMA - 1 X Power LED for CM4 - 1 X Activity LED for CM4 - 1 X Multicolour LED for signal strength of mobile module. - The carrier board should be made as small as possible. Skills and experience: - Freelancers interested need proficiency in electronics and PCB design, along with a deep understanding of Raspberry Pi Compute Module 4. Experience in custom carrier board design and SIM7600 or equivalent 4G mobile module that works in Australia on Telstra also required. The freelancer would be expected to have sample units manufactured and tested for functionality (third party manufacturer ok - Cost will be paid by me). - Applicants able to de...

I have an existing Arduino code which requires modification for converting my Bluetooth to BLE compatible for iOS applications. Your responsibility will be to: - Modify the existing Arduino code to make it BLE compatible - AS optional Create an iOS application with a control interface feature. The application should allow users to control and manage a customized smart lock model. Ideal Skills: - Expertise in Arduino code modification - Proven experience in developing BLE compatible software - Proficient in iOS application development, particularly in creating control interfaces - Familiarity with smart lock functionalities would be a bonus. Your services will be reviewed for potential system upgrading needs, hence, I'm interested in individuals who have a pr...

I'm looking to create pillar and topic pages for my website. The aim is to increase web traffic and enhance user experience. The primary focus will be real estate and homeowner topics. The desired structure is a hierarchy, with the pillar page linking to the various topic pages. Ideal Skills and Experience: - Proven experience writing engagin...engaging content around real estate and homeowner topics - Knowledge in SEO best practices to boost web traffic - Ability to craft user-friendly website structure, particularly hierarchical layouts. Experience writing highly effective pillar and topic pages. I've attached an example of how I would like my pillar page to resemble or look like. Here is an example:

I'm lo...current ones - The design should be visually appealing, contributing to the overall atmosphere of our cafe - The new barriers should be easy to refurbish, unlike the current ones - I'm primarily looking for a redesign which can be easily installed, removed, maintained - The PVC insert is currently difficult to replace and requires it to be shipped back to us to undertake the task. It need to be DIY Your experience with designing and implementing similar solutions, as well as your understanding of sustainability in material choices, will be key to this project. In terms of the redesign, I'm open to suggestions but I lean towards a steel or aluminium frame with printed PVC insets, as I believe this could be a good balance between durability, visual appeal a...

I'm looking for a skilled Affiliate Marketer for Amazon and ClickBank affiliate program by Using Pinterest who can take care of all aspects of my affiliate program from Pin post to Selling stage. My primary goal is to generate leads and sales for my Home Decor and DIY business. Mentionable that, this project is totally new and I have no website and no existing Pin on Pinterest aswell. Everything is should be done by your talented management. I have gathered some idea about affiliate marketing and want to start it by someone who is very friendly and helpful as a mentor, as a advisor and my Affiliate Manager. Key Responsibilities: - Creating and scheduling pins to ensure a consistent presence on the platform. - Creating a high conversion website to drive traffic from my pintere...

...circuits after a panel upgrade from 100A to 200A (done recently- stucco wall still open). This task requires careful consideration on how we can prepare for the addition of future circuits before stuccoing the exterior wall again- as well as designing the circuits. This would include a subpanel in the garage. Work to be done by myself, a 50-year veteran truck and car mechanic, welder, and general DIY guy. Key Details: - The primary goal for this upgrade and the garage subpanel is to meet increased power demand and lay groundwork for adding new circuits in the future. - I anticipate needing 7 or more extra circuits for future use. - I am interested in adding a Level 2 car charger in the garage for personal use. Ideal Skills: The perfect candidate for this project would have s...

...frustration. Target Audience: The book is aimed at Cybersecurity & IT professionals, business leaders, and students studying in technical & business fields]. The cover should appeal to this audience without overly childish visuals. Concept: Frustrated Hacker vs. Robust Security I will provide the image/s to be used. Foiled Attacks: Depict common threats being repelled: A phishing email bouncing off a shield marked "MFA" A malicious bug labeled "Malware" squashed by a "Software Update" patch Other clever visualizations of vulnerabilities failing to be exploited... Background: Simple, perhaps a subtle tech-inspired pattern to avoid distraction Title/Tagline: Space for a bold title like "Hackers Hate This!" and a short tagline sum...

I'm looking for a skilled Pinterest Manager who can take care of all aspects of my Pinterest account. My primary goal is to generate leads and sales for my Home Decor and DIY business. Key Responsibilities: - Creating and scheduling pins to ensure a consistent presence on the platform. - Optimizing board descriptions and titles, ensuring they are relevant and keyword-rich. - Engaging with the Pinterest community, increasing our visibility and driving traffic to our website. Requirements: - Proven experience as a Pinterest Manager, particularly in the Home Decor and DIY industry. - Strong understanding of Pinterest algorithms and best practices. - Ability to generate leads and drive sales through Pinterest marketing. - Excellent communication skills for community engage...

I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.

I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will be sent to the ...