Drywall screws jobs
I have...that I need simplified into a low-poly version. This model is intended to be used in my product description, alongside the outline drawing. The low-poly version should retain the basic shapes and key structural elements of the original high-detail model. The aim is to make the model more accessible and visually straightforward, without losing the essence of the original design. Inscriptions, screws and all internal structure shall be deleted. Electrical connectors shall be retained. Input and output models are in the STEP format. Ideal candidates for this job should have expertise in 3D modeling and rendering, and be able to maintain the key features while reducing the complexity of the model. Experience with low-poly modeling is a plus. Accuracy and attention to detai...
STEP file with all 3 pieces - the bracket, the aluminum strip, the rubber insert (for inside the bracket), and the screws
...site itself • Photos of the MSP/Breaker Panel • External and Sub-Panel images (as necessary) • Attic/Truss photos- including those exhibiting accurate measurements of top chord (rafter) spacing/height/width • Notes on the Map of the site with a key to locations of above mentioned Responsibilities • Use ladders as needed to enter into attics or access roofs • Use hand tools to perform cuts into drywall as needed to measure rafters in inaccessible attics • Capture photos of the electrical meter and service panels • Handle basic interactions with homeowners in a polite & professional manner • Upload deliverables to shared cloud storage in a timely manner • Conduct site surveys independently, travel from your own home Skills &...
...site itself • Photos of the MSP/Breaker Panel • External and Sub-Panel images (as necessary) • Attic/Truss photos- including those exhibiting accurate measurements of top chord (rafter) spacing/height/width • Notes on the Map of the site with a key to locations of above mentioned Responsibilities • Use ladders as needed to enter into attics or access roofs • Use hand tools to perform cuts into drywall as needed to measure rafters in inaccessible attics • Capture photos of the electrical meter and service panels • Handle basic interactions with homeowners in a polite & professional manner • Upload deliverables to shared cloud storage in a timely manner • Conduct site surveys independently, travel from your own home Skills &...
...site itself • Photos of the MSP/Breaker Panel • External and Sub-Panel images (as necessary) • Attic/Truss photos- including those exhibiting accurate measurements of top chord (rafter) spacing/height/width • Notes on the Map of the site with a key to locations of above mentioned Responsibilities • Use ladders as needed to enter into attics or access roofs • Use hand tools to perform cuts into drywall as needed to measure rafters in inaccessible attics • Capture photos of the electrical meter and service panels • Handle basic interactions with homeowners in a polite & professional manner • Upload deliverables to shared cloud storage in a timely manner • Conduct site surveys independently, travel from your own home Skills &...
I'm in need of a Blender animation that will showcase the installation process of a solar panel kit. This project is aimed at promoting the features of the kit, so it's essential that the visuals are engaging and informative. The animation is very short, it will be a 3D animation showing the panel coming out of the box and assembling itself with some screws and 2 poles onto a balcony. IMPORTANT: for the necessary files and explanation, send me a message or make a submission of one your past projects, I will then send you the files in private. Key Requirements: - **Moderate Detail**: The animation should be of a moderate level of detail, not overly complex but still visually appealing and informative. - **Accurate Models and Dimensions**: I will provide you with exact mod...
I'm seeking an experienced CAD drafter to assist in converting a 3D model, currently used for 3D printed plastic, into a model suitable for CNC'd Aluminum 7075. The only available source files are .stl, unsure of the original creation software. Skills and Experience: • Expertise in CAD drafting • Profici...suitable for CNC'd Aluminum 7075. The only available source files are .stl, unsure of the original creation software. Skills and Experience: • Expertise in CAD drafting • Proficient with major CAD software: SolidWorks, AutoCAD, Fusion 360, etc. • Proven experience with converting models for CNC'd Aluminum 7075 • Ability to work with .stl files I simply need to add threads suitable to fit M3x8mm screws in the location shown in ...
Specifically, the project will involve: - Effective and dynamic animation of a bracket and enclosure interacting with the 3D model. - This interaction would require the objects to rotate around the model and move synchronously with the model's movements. 2 animations 1) a simple animation to show from various angles 2) action animation, showing how the quick connect works, - remove two screws - slide 10mm - raise 10-20mm and the continue raising away maybe with it tilting away
...involve: - Effective and dynamic animation of a bracket and enclosure interacting with the 3D model. - This interaction would require the objects to rotate around the model and move synchronously with the model's movements. I need to 2 animations 1) a simple model rotation to show from various angles 2) action animation, showing how the quick connect works, this is quite simple - remove two screws - slide 10mm - raise 10-20mm and the continue raising away maybe with it tilting away I have attached a image of the model, I have models in STL and STEP to supply to FL that work with us on this Ideal skills and experience: - Proficiency in 3D model animations - Previous experience animating object interactions - High attention to intricate details of the model&...
I'm seeking a talented designer to develop a small, cardboard box specifically for distributing screws and nails. Key requirements: - The first box needs to be robust and the specific dimensions are 12cm x 12cm x 12cm Exact dimensions will be provided once the project begins. - The box will store screws and nails, so it needs to ensure safe and secure storage and delivery of these items. - The box material of choice is cardboard, though the design should make it sturdy and durable. Ideal skills and experience for this job: - Product Design - Packaging Design - CAD Design - Experience in the hardware industry is a plus.
...visualization, in one of thes programs: 1. STEP *Most preferred* (.stp/.step) 2. SOLIDWORKS (.sldprt) 3. IGES (.igs/.iges) 4. Parasolid (.x_t/.X_b) 5. PTC Creo (.prt) 6. Autodesk (.ipt) 7. CATIA (.catpart) 8. ACIS (.sat) The attached pictures are a rough model that we would like to be made from injection molding. -It is made of two plastic pieces, 1.) the center rod; and 2.) the 'top' piece that screws onto a flat surface (similar to a small drawer handle) the center rod can swing back and forth on. 1. The center rod (1) with the 'bottom' end in the shape of a step; the other end with a hole bore through it so it can swing freely on the 'top' piece (2). 2. The 'top' piece (similar to a drawer handle) (2) with screw holes on eac...
I'm seeking a talented designer who can create a pouch for my small hardware products, specifically screws and nuts. The pouch should not only serve the functional need of holding the product but should also tell the story of our brand. Requirements include: - Incorporating brand identity, mission, etc. into design - Creating a design suitable for small items (screws, nuts) - Maximizing the pouch's storytelling potential without compromising usability Ideal candidates would have prior experience in packaging design, particularly for small hardware or similar products, and a clear understanding of how to communicate brand values visually. Familiarity with different materials and their costs is also helpful, as the design should be economically feasible. Understan...
I need a logo for my new company. I would like it to be professional, modern, and memorable. Drywall United Key Points: - Create a modern and professional logo for a new company. - I don't have specific color preferences, but it should be aesthetically appealing. - The logo should be unique and easily recognizable. - The design should be suitable for both digital and print use. Ideal Experience: - Proven experience in logo design. - Strong portfolio demonstrating modern and professional style. - Ability to deliver high-quality work within a short timeframe.
In need of a customized solution for my project. Specifically, I'm seeking a professional that can create lightweight, anti-corrosive and high tensile strength fasteners: - Materials: Stainless steel is the preferred option due to its durability and resilience. - Types: I'm looking for screws and quarter turn fasteners tailored to specific needs. - Properties: The custom fasteners must be: - Lightweight for easy handling and installation - Anti-corrosive to improve durability and lifespan - High tensile strength to ensure structural stability Experience in manufacturing custom hardware is a must. A strong understanding of material properties including tensile strength, corrosion resistance and weight is crucial. Please provide samples or portfolios of previou...
...takeoff based on my construction plans. The primary focus will be on Frames Truss Roof Batten Metal Ceiling Batten Metal Wall Wrap Damp Course Insulation Locks Door Frames Cavity Sliders Doors Hinges Arc/Skirt Outdoor Rafters Exposed ( F17 – H3 ) Duragal 90mm Post’s Eaves Lining 6mm Cement Sheet with relevant pine framing and finishes (Quad) - nails Fibre Cement Sheet Cladding Framing Nails Batten Screws Mallee Timber is a Building Supplies company we are can supply the above materials to construction sites. We are currently requiring material take offs and quantities completed so a quote can be provided to builders. Requirements: - Proficiency in reading and interpreting construction plans - The ability to create a detailed list with quantities of materials - Ex...
I'm in the process of developing a range of standard mortise cylinder tails for specific lock cam tail applications. To reach this goal, I require the assistance of an experienced CAD p...Key Tasks: - Generate specific 2D and 3D CAD drawings of standard mortise cylinder tails. - Provide precise dimensions and specifications to be used in production. Ideal Candidate: - Has a strong background in mechanical engineering and CAD design. - Possesses a good understanding of lock mechanisms, especially mortise cylinders and lock cam tails. - Prior experience in drafting small parts like screws, nuts, and bolts will be considered an advantage. This project will provide the foundation for the production of quality mortise cylinder tails, acting as the cornerstone of our locks and se...
More details: What type of wall do you have? Drywall Do you have the mounting hardware for the pull-up bar? Yes, I have all the required hardware How soon do you need the pull-up bar installed? Within a week
I am seeking an architect who can create detailed drawings o...detailed drawings of my kitchen and bathroom renovation project. The main goal is to improve functionality, increase storage space and to elevate the aesthetic appeal. Key aspects of this project include: - Understanding the existing rough floor plan and kitchen layout. - Creating meticulous working drawings specifically for plumbing and electrical trades. The bathroom is to be enclosed with drywall, interior and exterior walls. Vanity is 27" wide Toilet dimensions are attached. The ideal candidate should have substantial experience with creating working drawings for residential renovation projects and specific knowledge of plumbing and electrical systems. By understanding my goals they will deliver outputs of ...
In the Hitachi brochure I found that the micro series has the web-based display function, but I can't get it to work. In the example we need to check the output screws via the web and read the status of the digital inputs. I need the PLC input and output status project to be made.
I'm seeking a knowledgeable tradesperson with experience in drywall handling to securely hang two computer monitors in my study room. Your tasks would include: - Providing suitable mounting brackets and hardware for two monitors - Installing these monitors onto a drywall The monitors are between 24 and 32 inches in size. Relevant experience with similar setups and expertise in drywall installations are required. Please make sure all installations leave minimal damage on the wall, and secure enough for daily use. Also, guidance on maintaining this setup would be appreciated.
I'm seeking a creative graphic designer to craft a unique logo for my company, All Pros - maintenance and construction. While I'm not confined to spec...capture my preference. Since I skipped the style selection, I'll appreciate a design that exhibits the balance between modern and minimalist styles, showcasing the progressive yet simplistic nature of our construction company. Ideal skills for this job would include graphic design, logo design, and a keen eye for effective color schemes and visually appealing minimalist designs. Services: plumbing, drywall, framing, electrical, painting, repairs, flooring At the end I'll need you to send an extra file with the businesses phone number under the logo and Hablamos español (for my tshirts). But that is only...
...bid if you're able to meet the requirements and deadline. I hope this message finds you well. I have a job for you that involves creating a detailed drawing for one of our pergola projects. I have some drawings in CAD format that I would like you to work on. Specifically, I need you to illustrate how a polycarbonate sheet will be placed on top of the pergola, including how it will fit, what the screws will look like, the thickness of the sheet, and how the sheets will overlap on top of each other. I have also attached a file titled "" which provides details on the steel works involved in the project. In essence, I am looking for you to showcase the specific details of how the polycarbonate sheet will be fixed on top of the steel structure, in conjunction with the ...
I have a robot and I need to 3d print a body cover to hide the cables in chest and shoulder areas. I need the 3d model that can be opened in CAD software, and I will 3d print them in parts and assemble together using screws. Please design the 3d model and provide STEP or file format compatible in most CAD software. The model will need to be split into multiple parts to be 3d printed. I might make the neck longer so the screen will be lifted and won't block body parts
...button in the web page. The signal is paired to a relay or dimmer on the receiver that has the pairing button activated. The name of the ports is 1-4 Relay A, (a relay is either in position A or B) 1-4 Relay B, 1-3 Dim (the dimmer steps in one direction, first more, then less, then more, etc.) 1-3 on/Off All on All off space for 4 relays and 3 dimmers. each relay connects with 3 screws, dimmer connects with 2 screws. Set each device's address dynamically, and save the address in local memory....
I require a thorough and detailed collection of pictures featuring various types of fasteners. From screws to bolts and nuts, I need a variety of them captured. A significant part of the project would be ensuring that each fastener photographed adheres to different standards such as ISO, ANSI, DIN, NEN, and more. The focus of the photographs should not just be the fastener itself but also specific details like the material and the coating/finish. Skilled photographers who have experience in focusing on minute details and producing high-quality images of such objects would be ideally suited for this task. Knowledge or experience in the engineering or manufacturing sectors could be a plus. the results should be better than this: we have
...Facebook posts in Spanish. These posts will serve as advertisements to promote the various services offered by Ensenada Handyman to its target audience. The contractor will be responsible for crafting compelling and informative posts that highlight the diverse range of services provided by Ensenada Handyman. These services include: General Repairs: This includes fixing leaky faucets, repairing drywall, or addressing any other minor household issues. Painting: Interior and exterior painting services, including surface preparation, priming, and applying paint coats. Carpentry: Installation or repair of cabinets, shelves, doors, window frames, and other wooden fixtures. Electrical Work: Installing light fixtures, ceiling fans, outlets, or troubleshooting electrical issues (Note...
I am looking for a freelancer who can accuratel...a freelancer who can accurately calculate the quantities of drywall needed for a project. The project involves determining the amount of drywall required for an area with specific square footage. Skills and Experience: - Provide drywall square-footage - Experience in accurately calculating drywall quantities - Knowledge of different drywall thicknesses and sizes - Attention to detail and precision in measurements - Ability to work with the provided square footage and calculate the required amount of drywall The ideal freelancer should be able to accurately calculate the quantities of drywall needed based on the provided square footage. This project requires someone with experience in accu...
...to create a logo for our wholesale hardware business established in 1974. The design should highlight trust, quality, and our longevity in the market. Key elements to be incorporated: - Necessary to have a colour palette consisting of sturdy tones such as steel or chrome, which symbolize endurance and heritage. - Incorporate elements like handles, mason tools, and hardware objects (i.e. nails, screws, bolts) representing our business. - The design should project an image of durability, possibly through the use of hardware tools as design elements. This job is ideal for freelancers with experience in designing logos for wholesale or industrial businesses; understanding the nuances of this market niche would be a great plus. Strong skills in user-centered design and color theory...
I require a talented graphic designer to recreate our brand's logo for a new market. The logo must be clean and minimalistic, incorporating the text "Skrotmagneten". An exa...logo format that should fit to be labeled on the product Requirements: - Wide aspect. (Current logo is 7:2) - 1-3 colors. - Simple design. - Fit the brand. (Magnet for metal scrap in industrial, construction and similar use cases) - Text focused logo (With option to add details that reflects industrial magnet scrap or screws etc) Ideal Candidate Will Have: - Extensive experience in minimalistic logo design - Strong understanding of color theory. - The ability to create scalable vector graphics. - Experience designing logos for print media.
I need a technician with adept skills in mounting large televisions, specifically those 61" and above, onto a drywall. I'm looking to have the TV positioned in the middle of the wall for optimal viewing experience. The necessary mounting hardware is already available, hence, I require your expertise in ensuring a secure and stable installation. Knowledge of cable management and wall safety are essential for this project. Your previous experiences in similar tasks will greatly be valued.
I'm seeking a knowledgeable tradesperson with experience in drywall handling to securely hang two computer monitors in my study room. Your tasks would include: - Providing suitable mounting brackets and hardware for two monitors - Installing these monitors onto a drywall The monitors are between 24 and 32 inches in size. Relevant experience with similar setups and expertise in drywall installations are required. Please make sure all installations leave minimal damage on the wall, and secure enough for daily use. Also, guidance on maintaining this setup would be appreciated.
I'm urgently seeking an experienced audio technician to replace lost screws on my audio wire. Key requirements include: - Expertise in handling and repairing audio equipment - Access to a precision screwdriver set - Ability to work meticulously and ensure the audio wire is secure post repair - Familiarity with cleaning checks and fuses for optimal performance Previous experience in similar roles will be highly advantageous. Please place your bid. Thank you.
...shown in the provided artwork. Compatibility: The cover must be compatible with the sensor board, including appropriate clearances for components and connectors. It should allow for easy access to the board for maintenance or adjustments. Mounting Plate: The mounting plate should be designed to be fixed to a wall and should align with the cover for a seamless fit. The plate must include holes for screws, accounting for standard wall attachment practices. Ventilation: The cover must provide sufficient ventilation for the sensor to operate correctly without overheating. Sensor Access: Design a method of access to the sensor board for maintenance, such as a snap-fit, screw fit, or hinged mechanism. Wall Mounting: The mounting plate should include features that allow for easy an...
I need an experienced mural artist who is skilled in creating sun-themed art. The task is for a small drywall which is less than 10 square feet. Ideal Skills & Experience: - Past experience in mural creation - Proficient in sun-themed artwork - Able to work with drywall surfaces Your task will be: - Design and execute a sun-themed mural - Manage paint material selection and purchase - Work within the specified size of less than 10 sq ft Only professional and experienced mural artists are encouraged to bid. Examples of previous work, especially sun-themed artwork, will be highly appreciated.
I'm on the hunt for a skilled designer to produce a refined and stylish door hanger for my business. The design should be simple and clean, not overly complicated or flashy, but still professional and engaging. Here's what I'm looking for: - The inclusion of my company name and logo within the design, placed strategically for maxim...business hours need to be clearly visible and easy to read. Additionally, I'm interested in a neutral and elegant color scheme - think refined, not flamboyant. If you have prior experience in door hanger design or related projects, and a keen eye for aesthetics and fine details, your skills will be highly prized for this job! We want to concentrate on basement, and bathroom renovations as well as drywall work. You can get the co...
...must be done in SolidWorks. Also, it's important that any standard parts like screws or fasteners needed are chosen from McMaster-Carr link at the end of this description to make sure they are easy to get and fit well together (they also provide SolidWorks files for most of the parts they sell). This approach helps us keep the design simple, consistent, and easy to assemble or fix. Key Responsibilities: Conduct a thorough analysis of the current gauge design as demonstrated in the provided video, focusing on mechanical components that require redesign. Develop optimized 3D models of all redesigned parts using SolidWorks, ensuring precision in fit, form, and function. Select all off-the-shelf parts, such as screws and connectors, exclusively from McMaster-Carr to stre...
...parameters: - Maximum allowed stress for the thread - Coefficient of friction between the threaded surfaces - Thread pitch 4mm Your job would be to guide me through the decisions regarding these parameters based on your expertise. The project involves: 1. Understanding the Material: - Knowledge of AISI 4340 material properties is a must. - Experience dealing with its application in screws and threading will be plus. 2. Calculating Shear Resistance: - The main goal is to calculate the shear resistance of the thread. - You need to provide a detailed explanation of how to calculate it. 3. Advising on Parameters: - Suggestion on the maximum allowed stress for the thread. - Suggestion on the coefficient of friction between the threaded surfaces. -...
...globally, so refrain from using other elements from other brands. A description of the product that goes with the brand...please see the uploaded video for the complete product and the description below for further details about the system. EC Roller blind system EC Roller provides a simple, tool-free window covering solution - no screws, no drilling, no mess, no stress. The EC roller blind system offers a hassle-free solution for covering windows without the need for screws or drilling. It utilizes a 38 mm tube, but plans are being made to introduce a 32 mm system. The EC roller system has a heavy-duty spring-loaded idle end, which can be easily locked in position via the EC wheel. Along with the mechanism, it has specially developed fixing plates that incorporate rubbe...
We are remodeling our kitchen, the electrician completed his rough-in work and the drywallers closed the walls before the electrical inspector could view the wires. The inspector asked that we either tear down the drywall or have a licensed Professional Electrical engineer approve the installation. We want to check on the price of having an electrical engineer approve the installation to see which resolution is most economical.
...scope of work includes CFM framing, sheathing, rough carpentry, insulation, fireproofing, shaft walls, LGS framing, drywall and acoustical ceilings. I'm not just looking for a ballpark figure, but rather a detailed itemized estimate that covers all potential costs. A comprehensive understanding of construction costs and the ability to delve into specific areas of cost is required. Ideal candidate will have experience with OST & QuickBid, as well as Proest. A candidate with their own software is preferred. Ideal Skills & Experience: - Strong previous experience in construction estimation, specifically within commercial buildings. More specifically with metal stud framing & drywall - Ability to create detailed itemized cost analyses with detailed mater...
I am looking for a professional who can safely mount my more than 55 inches sized TV onto a drywall. Key Specifications: - You will be working on a drywall, so experience with this type of installation is crucial. - The TV size is larger than 55 inches. Ideal skills: - You should have prior experience in TV mounting on drywall. - Capacity to handle large screens is essential. Please note: - No additional features required such as swivel mount, cord hiding, or shelf installation.
I'm seeking a talented illustrator to produce engaging, easy-to-understand drawings for an assembly manual. This guide will be for a product constructed from plywood panels, tubular metal legs, and basic fasteners such as screws, bolts, nuts, and washers. Key Elements of Project: - You will not be required to design the product. I have comprehensive drawings and photos on hand. - The purpose of the manual is to provide step-by-step assembly instructions to customers. - Drawings should give an overview of each assembly step. - Visuals should be portrayed in an isometric (3D) perspective. Desired Skills: - Expertise in technical drawings. - Experience creating instruction manuals. - Proficient in creating 3D isometric illustrations. - Strong communication skills to understand...
...- Strong grasp of ergonomics and usability principles - Knowledge of material selection for industrial applications -Knowledge of fixings, fittings and joinery - Exceptional rendering skills to present the product in the best light - Ability to work with me to refine designs based on feedback **Scope of Work:** - Develop CAD models from sketches or descriptions (detail such as nuts, bolts and screws included) - Advise on materials that balance cost, functionality, and aesthetics - Produce high-quality renders and posters for presentations and pitches - Optional: Experience in preparing design files for prototyping and manufacturing This job is perfect for someone who excels at turning concepts into tangible designs and can guide material selection to balance practicality with ...
...companies - Developing a logistics framework to streamline the process of inventory management, order fulfillment, and delivery schedules. - Implementing a marketing strategy that effectively targets our core demographic, emphasizing the quality and range of our products. **Ideal Skills and Experience:** - Extensive knowledge in the building materials industry, particularly with wall laminate, drywall, and flooring products. - Experience in supply chain management and logistics, especially within the context of building materials distribution. -Must have a good network in the local market. So that we can get clients easily - Strong business development and relationship management skills, with a proven ability to negotiate and secure profitable partnerships. - Marketing experti...
...be full size (take up the full screen before scrolling down) that conveys the following: We would like to show an open concept office building or similar such structure (some type of commercial building) and demonstrate 3 things: 1) Different types of flooring options 2) Different types of paint options, wallpapers, etc. 3) Different types of texture on the walls and ceilings demonstrating drywall options For example, in this photo, you can see different types of cabinetry, landscaping, fencing, gables, roofing, outdoor kitchen - that is the type of photo we want but for the options listed above and would be more of an indoor building photo. **Ideal skills and experience:** - Proficiency in graphic design software (e.g., Adobe Photoshop, Illustrator) - Experience
...WRONG operations. I left my home Hawaii and moved to CA for medical care with UCLA the head trauma Othro Surgeon. I just had my 11th operation using the correct procedure and want to take all of this hardware and create a beautiful design for my Surgeon who saved my shoulder and arm. I am not artistic in anyway. The only thing I in-vision is the metal plates and screws floating in the background and the correct metal plate and screws that healed me in the forefront with a special message below. Maybe using his photo and my photo as background somehow. Gosh I really don’t know. I just know I am beyond grateful and would love to show him outside of flowers, plants etc.. My case is unheard of 11 operations for a fracture turned nightmare. I can send photos if th...
I'm looking for someone adept at shelving installation. I own a 5’ 5” live edge shelf with a weight that falls into the 10-20 pounds range. The shelf needs to be installed at a specific height on a typical drywall. The chosen method for installation is through the blind/floating shelf approach, for which floating shelf brackets are to be utilized. - Skills: Handyman services, drilling, measuring, installation skills - Experience: Previous experience hanging live edge or floating shelves on drywall is ideal, as is experience with precise installations at specific heights.
...being pointed with dollar signs. This 3D transforms geometry and design (mainly on the 4-6 elements) getting more detailed. Its width, depth, and height also changes. While all these changes are happening, each element that has the title and a dollar cost to it constantly changes. During this whole 3D animation, there should be a spreadsheet with 4-6elements + more stuff like rebar, painting, drywall, etc that adds up to a total construction price around $400m. During the 3D animation change, each line item changes changing the total $400m to constantly change and resulting this amount to be $350m. 3rd service is project management. “we provide overall project management service during construction to minimize conflicts, delays and overruns. Construction is a complicated pr...
...searching for a talented freelancer to create a traditional-style 3D cover for an electric motor-driven windmill, which I plan to present as a wedding gift. This 3D model should be compatible with my Bambulap P1S printer, and I intend to use PLA material for printing. Key Project Points: - Design a traditional windmill cover - Create a printable 3D model - Cover needs to be fixed to wood parts (glue, screws, press fitting or else), - cover needs sime stabikity to hold glued-on miniature tiles - No additional decorative features required Ideal Skills: - 3D modeling expertise - Experience with stp file format - Knowledge of 3D printing using PLA - Familiarity with Bambulap P1S printer is a plus What I'm Offering: - Clear communication and prompt responses - Appreciation a...
