Precompiled jobs
...desired platform for the Flutter project is both Android and iOS. You need to be expert in and familiar with OpenCV, OpenFace, dlib, OpenBLAS, Boost, Eigen as you need to build them for mobile. Maybe also need to use c++ sources in mobile project of openblass and dlib instead of precompiled libraries. For flutter side, it could be compiled using Flutter FFI. The major problem it that OpenFace is 6 years old, last update 3 years ago. The code itself if fine but, dependencies are tooooo old. Please also see attached error when compiling for mobile. Skills and experience required: - Strong knowledge
I created a sample project in ASP.NET MVC C#, then tried to deploy the precompiled files but not working.
...some simple commands and call a custom C function. Custom C function will just blink a led. - no elua or simpler project. This must be the official LUA source code running. This is not meant to be a real application, just a working proof of concept. To be valid, the program must be run successfully on a nucleo L552 board i have. Compilable project will have to be given for validation, no precompiled firmware accepted. A simple lua script, which will be used as a stored string within executable will be given when project starts. Deliverable will be a zip of the project, compilable in debug and release, running lua script and calling the c function. Documentation on the method to integrate a working LUA within the project must be given. Steps will be validated to produce ...
Could not build the precompiled application for the device. Parse Issue (Xcode): Expected expression /Users/nourahaldosari/FlutterDev/flutter/.pub-cache/hosted/pub.dartlang.org/geolocator_apple-2.1.1+1/ios/Classes/GeolocatorPlugin.m:178:54 2 Semantic Issue (Xcode): Use of undeclared identifier 'options' /Users/nourahaldosari/FlutterDev/flutter/.pub-cache/hosted/pub.dartlang.org/geolocator_apple-2.1.1+1/ios/Classes/GeolocatorPlugin.m:178:28 Semantic Issue (Xcode): Use of undeclared identifier 'completionHandler' /Users/nourahaldosari/FlutterDev/flutter/.pub-cache/hosted/pub.dartlang.org/geolocator_apple-2.1.1+1/ios/Classes/GeolocatorPlugin.m:178:36 3 Error launching application on iPhone NOno. How I fix this error?
We have an ARM based module that will be connected to the Internet via the Ethernet interface(eth0) and we would like to control how WiFi clients(uap0) then access the Internet via eth0. We are restricted on what modules are available as the project has a precompiled Kernel and any changes requires a Kernal compile. Software is ARM based Toradex module iMX8 with Linux Yocto running these modules: -systemd -resolved -iw -connman -hostapd -dnsmasq -dhcpd not compiled into this kernel -iptables WiFi is configured as uap0 Ethernet is eth0 The requirement is to provide the configuration files (, , etc) and scripts necessary to provide the following: -Setup eth0 to be connected to router providing the DHCP and Internet access -Setup the WiFi (uap0) as an access point to
...data: can be news sites, magazines, blogs, etc. as long as they have useful information. The task will be done in incognito tab in chrome and no login is needed. There is also a 30 minutes instructional video which explains exactly how to insert the entries to the dataset: The task has 5 simple and short steps: 1. Propose a new knowledge data, from a precompiled list or by your choice. 2. Check whether it's already in the catalogue, (takes 10 seconds). 3. Go to the form, fill out the information for your entry with help from the and the full guide. (5 to 10 minutes per website). 4. Don't forget to save your work, then make sure that the new entry is in the database (takes 10 seconds). (similar to step 2) 5. Keeping track of the work you have done in
Hi Sohaib H., I noticed your profile and would like ...client must be proved to work on a hosted Linux server using coding (again not sure what is the most suitable code to use). 7. EPP client must be able to handle all error checking. 8. Script will need extensive testing Please do not send me a generic/canned response. I am specifically looking for someone who has experience with this particular script, not just someone experienced in C++. A precompiled binary application would be ideal. Please respond if you've written such a script before and know how to be competitive. Skills: C# Programming, C++ Programming, Software Architecture Resources
Key Requirements o 4 years working experience with Angular 7+ o Comfortable with TypeScript o Knowledge of Bootstrap o Precompiled CSS experience o Awareness of common design patterns (Observer, factory, facade...) o Knowledge of Git and Feature Branch Workflow o Fluency in English It's great if you also have: o Store management experience with ngxs/ngrx o GraphQL experience o Experience with agile software development practices o Interest and / or previous experience in gaming industry and design for gaming o Previous experience working with a remote / distributed team
Key Requirements o 4 years working experience with Angular 7+ o Comfortable with TypeScript o Knowledge of Bootstrap o Precompiled CSS experience o Awareness of common design patterns (Observer, factory, facade...) o Knowledge of Git and Feature Branch Workflow o Fluency in English It's great if you also have: o Store management experience with ngxs/ngrx o GraphQL experience o Experience with agile software development practices o Interest and / or previous experience in gaming industry and design for gaming o Previous experience working with a remote / distributed team
...Keep your HTML, CSS, and JS knowledge up-to-date. Key Skills and Competencies: Experience with Javascript, React, and React Hooks Experience with VTEX Store Framework Experience with VTEX IO and/or VTEX Legacy Experience with VTEX APIs Asynchronous Programming At least 2 years experience in building user interfaces using HTML5, CSS3, and consuming JSON web services via AJAX. Experience with precompiled CSS using LESS or SASS, and front-end frameworks like Bootstrap, Tachyons Experience working with Agile Methodologies Degree in Computer Science, or Information Technology, Graphic Design or equivalent Good verbal and written communication in English....
...list : user login form . After logging in, the user is redirected to their Layette List. 3) Look for a layette list : Here you can search for another person's layette list in order to view it . It will be possible to search the layette list by name of the person (if the layette list is flagged as "public") -------------------------------- When a user creates his layette list, it is precompiled with a template , according to the rules decided in the backend : The layette list will be divided into 2 sections: • the 1st section is made up of the template • the second section consists of the products added by the user and present on the shopify store (a kind of wishlist ) The templates must be fitted in the backend Each row of the template list mu...
someone who can work urgently on this task,
someone who can work urgently on this task,
someone who can work urgently on this task,
...output error during installation: -- Build files have been written to: /Users/nathan/blackbird/build nathan@Nathans-MacBook-Air blackbird % cmake --build ./build -- install [ 3%] Generating CXX unity source cotire/ [ 6%] Generating CXX prefix source cotire/ [ 10%] Generating CXX prefix header cotire/ [ 13%] Building CXX precompiled header cotire/ Scanning dependencies of target blackbird [ 16%] Building CXX object CMakeFiles/ [ 20%] Building CXX object CMakeFiles/ [ 23%] Building CXX object CMakeFiles/ [ 26%] Building CXX object CMakeFiles/ [ 30%] Building CXX object
I've got a site on shared GoDaddy hosting right now, so no changes can be made on the server. It has to be precompiled and then pushed up. When they transferred it, several variables in the are missing. I haven't messed with Visual Studio in years, and can't figure out how to load in the existing website to make the changes. Everything works, except the forms can't figure out what the 'from' address is supposed to be.
Highly ...client must be proved to work on a hosted Linux server using coding (again not sure what is the most suitable code to use). 7. EPP client must be able to handle all error checking. 8. Script will need extensive testing Please do not send me a generic/canned response. I am specifically looking for someone who has experience with this particular script, not just someone experienced in C++. A precompiled binary application would be ideal. Please respond if you've written such a script before and know how to be competitive. Skills: C# Programming, C++ Programming, Software Architecture Resources Please no quotes for more than budget.
it must be 100% responsive and fast loading and have exact colors, shapes, shades , as the speciemen provided. Each visible component (select, inputbox, grids, panels, tabs) have to look the same as the speciemen provided. Bonus if you can add movable panel docking (not essential) Graphics are welcome but absolutely not essential You can use only royalty free libraries and i'd prefer precompiled CSS and html only for the graphics (no less, no sass, no psd) what is really import are grids, buttons, panels, tabs with those colors, shades, round corners and 3d effect. This shouldn't be hard for an experienced web designer
Looking for a person who is able to convert 9 old Unity 4 precompiled shaders to normal, modern Unity shaders. The precompiled shaders themselves shouldn't have more than 40-100 lines of assembly code each. So this shouldn't take more than a few hours. Assembly and HLSL knowledge required. Here is a small excerpt of one such shader: SubProgram "d3d9 " { Bind "vertex" Vertex Bind "color" Color Matrix 0 [glstate_matrix_mvp] Vector 4 [_Color] "vs_2_0 def c5, 1.00000000, 0.50000000, 1.50000000, 0.00000000 dcl_position0 v0 dcl_color0 v1 add r0.x, -v1.w, c5 mul r0, r0.x, c4 min r1.x, r0, r0.z mul r1.x, r1, c5.y add r2.x, -r1, c5.z add r0, r0, v1 slt r1.x, r2, r0 max r1.x, -r1, r1 slt r2.y, c5.w, r1.x rcp r1.x, r0.x mul r2.z, r2.x, r1.x...
We are looking for a CFD expert with preferable knowledge of medical 3D modeling (arteries, veins, heart). The main goal of this project is to use a boundary condition framework that we have internally developed to integrate ANS...print it in the Ansys command line. 4) Run the simulation in task 1) where for each time step and for each interface you send various JSON messages. These messages are: a) Provide cross-sectional normal pressure across the boundary interface b) Request flow c) You impose the flow at the 3D interface d) Send a March message e) You can advance in time IMPORTANT: You will need to integrate our precompiled library .lib into the makefile generated by fluent. You can find here a description of how to compile an external library in fluent (INSTRUCTION will be...
Please read and bid General proposal will be rejected We are looking for a CFD expert with preferable knowledge of medical 3D modeling (arteries, veins, heart). The main goal of this project is to use a boundary condition frame...print it in the Ansys command line. 4) Run the simulation in task 1) where for each time step and for each interface you send various JSON messages. These messages are: a) Provide cross-sectional normal pressure across the boundary interface b) Request flow c) You impose the flow at the 3D interface d) Send a March message e) You can advance in time IMPORTANT: You will need to integrate our precompiled library .lib into the makefile generated by fluent. You can find here a description of how to compile an external library in fluent (INSTRUCTION will be...
...space relative to photo. Also, there may be light flares, sometimes tracked photo may not be fully visible or visible at an angle — in these cases, video should be displayed correctly over photo. See attached video example on iOS with ARKit — this is the level of image tracking quality and performance required in this project. Photos and videos are added to AR from app file system, not as an precompiled asset, because the user downloads them from our server (this part of app is already implemented). There would be a few image/video files added from app assets, the rest are added from file system. Photos are PNG/JPG and videos are MP4 with sound. Ideally the app should be able to detect multiple images and play multiple videos at the same time. You can use any technolo...
I look for help to create Google Adwords campaigns for my site www.dedecouture.com. Please do not send precompiled messages. We will welcome a strategy based on our market. The work will also be used for campaign management. Things to do: -The countries (minimum 3) for the advertising campaign via business planning - Set the code for the conversions Campaigns must be created manually
I look for help to create Google Adwords campaigns for my site www.dedecouture.com. Please do not send precompiled messages. We will welcome a strategy based on our market. The work will also be used for campaign management. Things to do: -The countries (minimum 3) for the advertising campaign via business planning - Set the code for the conversions Campaigns must be created manually
I don't know how to convert sqlite source code (sqliteInt.h and etc...) into sqlite3.c sqlite3.h i have old sqlite version and i need to convert it to one .cpp and .h file precompiled
...classroom and online training courses in saas mode. The portal will act as a point of authorization request for the opening of the course, once authorized, will provide the possibility of: 1. load the pupils 2. select the teachers 3. select and / or insert new addresses and / or training venues 4. Download student attendance reports in pdf format (Precompiled with the list of participating students) 5. Download the attendance register in pdf (Precompiled with the list of participating students) 6. Upload the minutes in pdf format 7. Upload the record of attendance log in pdf 8. Authorize the printing of certificates The platform must: 1. Archiving Students (Learners) 2. Archive companies 3. Archive teachers 4. Archive locations 5. Archive Tutor 6. Archive Translators Eac...
I have a wp site that uses the mycred plugin that needs to add a "Instamojo payment option" to the mycred plugin. Basically, mycred uses a precompiled add-on called buycred does allow user to order points using instamojo. I need you to build as the same systematic system that works with the mycred plugin. Also remember to do the instamojo payment option without touching the wp core file or the mycred plugin. For instamojo information: For the mycred codex: For the payment of mycred:
A .NET (C#) library with examples that is capable of compressing and streaming images as video over WebRTC. For example; - The library needs to avoid linking to any codecs that might b...streaming images as video over WebRTC. For example; - The library needs to avoid linking to any codecs that might be patent encumbered (e.g. AV1/VP9 are fine) - If the library links to native code, the library must be cross platform, capable of running on Windows 7 and up, MacOS 10.10 and up and preferably Linux. The library must be delivered with both precompiled DLLs for these platforms, and build scripts & instructions for compiling. - The library must be compatible with .NET 3.5, and avoid usage of the namespace
Just wanted someone to help to do something like in this video : with source code and apk precompiled for android in Android Studio Please contact for more details
Develop a master node cryptocurrency on RUSH delivery! PoS coin with a large premine! (yes you will be expected to mine the coins) Use of X13 technology (we want a COIN, not a TOKEN) I will provide the specifics once I find the right person Must haves: Installation of 3 nodes Proof of masternode functionality Windows Wallet Mac Wallet Precompiled Ubuntu wallet (we already have a webwallet we can connect the new blockchain to)
I have a Windows Server 2016 setup on Amazon EC2 t2 tier without GPU. The problem is I need to run an application which uses OpenGL 2.1 or OpenGL 3 The...Amazon EC2 t2 tier without GPU. The problem is I need to run an application which uses OpenGL 2.1 or OpenGL 3 The application will crash with error [LWJGL] GLFW_API_UNAVAILABLE error Description : WGL: The driver does not appear to support OpenGL I have tried to compile MESA but the server is too slow and requires Visual Studio to compile. I have cant find anywhere to download precompiled version for Windows Server 2016. I need a solution that enables me to run the OpenGL application on t2 tier on ec2. The application runs successfully if I add a elastic GPU to the instance, but it too costly and requires m3/m4...
...data parsing and discover all variables (search for " = " or keywords like int/double/long "XYZstring"+";") and map them to a excel like table for in a visual basic or gui windows app and show user variable list for editing * Mass file search and replace for editing items in many files must be able to search sub directories - perhaps a subversion log of text being changed. - Note precompiled files .o etc and output warnings about unknowns. *Modular variable renamer executable/batch to be a maybe server side or on PC. Example every X days all program variables are renamed to prevent hacking. Might be good for MMO games. - uses a set of variable names and replaces them by appending data to old variable name or by encryption. ...
#1 New Relic file not found error #2 Failed to emit precompiled header
...using Cloudtrax service [0] with OMPv2 routers [1] to provide WIFI analytics to our customers. We install additional code on the routers via custom shell scripts [2] where we download and extract our application, but with latest OpenMesh firmwares we are having troubles as the application doesn't fit the available space. Application consists of library binaries (lua, sqlite, pcap, radiotap), precompiled Lua code and shell scripts. Main binary is a mix of C and Lua code. The operating system is OpenWRT and LEDE Project in latest firmware. Main objective is to make sure the application reduces in size, but if feasible or in the future we plan on moving away from Lua and porting all code to C. There is possibility of joing us in similar area of development. [0] [1...
Highly specific job and I am ONLY looking for people who have written a drop catcher for Nominet before. Please do not send me a generic/canned response. I am specifically looking for someone who has experience with this particular script, not just someone experienced in C++ A precompiled binary application would be ideal. Please respond if you've written such a script before and know how to be competitive. Once again, no generic/canned responses. Tell me something so I know you're the man (or woman) for the job!
I am looking for a developer to help me create a redistributable, precompiled executable application for Windows/MacOS/Android operating systems (both mobile and desktop). The app would have two main tasks: to mine cryptocurrencies using 10% of available resources on the device and to serve as a password protected http(s) and socks proxy server. Programming language is up to you. Details to be discussed on PM.
...and iOS, swapping platform specific code using #if defines or additional wrapping source that is platform specific -Should run at a reasonable framerate on modern phones, to appear smooth 30fps is a good minimum goal, and 60 would be ideal -dlib and openCV should be included and used in the project, as used in the python source, they may be included by either compiling from source or using precompiled binaries, provided the project compiles for the most common architectures on both platforms -calls to numpy should be replaced with either written code or source code from a library, the source should be included in the project either way -The android version should be a java project with the code you write included as a native library written in C/C++, drawing to a GLSurfaceVie...
We need to customize the QtWebEngine module of the Qt SDK. Our a goal is to get the library with proprietary codecs enabled (mp3, h264), because the open-source precompiled SDK disable it by default. So we need someone who got knowledges in MSVC2015 C++ compilation. The job is to compile QtWebEngine module in 32 bits for the version 5.7.1 of Qt. Here is an explanation of how to do it by Qt team : The test is to use and look if mp3 support is enabled in audio category. Here are problems we already faced and asked :
Highly specific job and I am ONLY looking for people who have written a drop catcher for Nominet before. Please do not send me a generic/canned response. I am specifically looking for someone who has experience with this particular script, not just someone experienced in C++ A precompiled binary application would be ideal. Please respond if you've written such a script before and know how to be competitive. Once again, no generic/canned responses. Tell me something so I know you're the man (or woman) for the job
...android tablet that has a UART port. This will be permanently connected via UART to a Microchip PIC24FJ1024GA606 MCU. I need the app to be able to reprogram the PIC24 in the field, and for safety I want to use the dual boot functionality. I want you to do 3 things: 1) write an android app that will contain a precompiled .hex file. This app will start, ask the MCU which firmware it has and compare against the firmware version in the precompiled .hex file. If the precompiled .hex file is a higher FW version the user will get asked if he wants to update the FW. If he clicks yes then the oldest FW in the MCU is overwritten with the one in the file. The app should compile in Android Studio and the .hex file should be included so that I can easily update the ....
I need an Android app. It will be similar to YouMap cast receiver. I'll provide a design (it will be one to two pages of UI). What the app needs to do: Receive Google Cast signal, and display. It must be compatible with ALL Android devices (phones, TVs, Fire TV stick, etc) I don't care what language it gets written in, but, whichever you choose, I want the app source code, as well as a precompiled apk. It doesn't have to be signed. This is a personal project, so I'm open to suggestions. I can be somewhat flexible with the specs, as well, if need be.
Highly specific job and I am ONLY looking for people who have written a drop catcher for Nominet before. Please do not send me a generic/canned response. I am specifically looking for someone who has experience with this particular script, not just someone experienced in C++ A precompiled binary application would be ideal. Please respond if you've written such a script before and know how to be competitive. Once again, no generic/canned responses. Tell me something so I know you're the man (or woman) for the job!
Hi, i'm currently working on some rails 5 app, check This app based on html template So, i need an experienced Rails developer to do some implementations, here is what you should do in this project: 1) Fix geocomplete, it's not working in production env, i've precompiled all assetes, but nothing changed, same some images don't showing ( like stars in reviews section /room page) 2)Add some CSS to: 1. Main page search field(geocomplete dropdown should looks similer to Airbnb; style calendar dropdown as in html template, style guests dropdown as in html template) 2. Create/edit listing page style dropdowns() as in html template; Same as for main page, fix geocomplete in production ENV and style
Hi, i'm currently working on some rails 5 app, check This app based on html template So, i need an experienced Rails developer to do some implementations, here is what you should do in this project: 1) Fix geocomplete, it's not working in production env, i've precompiled all assetes, but nothing changed, same some images don't showing ( like stars in reviews section /room page) 2)Add some CSS to: 1. Main page search field(geocomplete dropdown should looks similer to Airbnb; style calendar dropdown as in html template, style guests dropdown as in html template) 2. Create/edit listing page style dropdowns() as in html template; Same as for main page, fix geocomplete in production ENV
Hi, We are in search of an expert that can maneuver our precompiled CSS/SCSS and JavaScript files to come up with a different and "unique" end product– We have small projects for you, like button effects, site header change, slide menus, etc. Besides, css and javascript knowledge, you must also be familiar with HTML5, and you must have experience with colors matching between different web-elements. Important note: We already have the codes, all you need to do is play around with each element(s)/component(s) to come up with different user experience feel/looks. PLEASE NOTE: This is NOT just a one project work! We have many, many, and many files for you to work on. So to get you started, you first need to win our trust with your skills. Then, we'll add ...
library source code : Requirement: 1- Compiling the source code as a static library (not Dll, just static lib with a header include file and folder) and not precompiled for windows CE 5.0 (called smart device in VS2008) 2- using visual studio 2008 smart device with Windows CE 5.0 Standard SDK for compile WinCE 5.0 standard SDK download link 3- ATL and MFC toolchains are not permited 4- and finally you should be able to run the below demo on WinCE: Demo 1: Demo 2: Demo 3: Demo 4: draw the Unicode text on screen in any style with given input file and
library source code : Requirement: 1- Compiling the source code as a static library (not Dll, just static lib with a header include file and folder) and not precompiled for windows CE 5.0 (called smart device in VS2008) 2- using visual studio 2008 smart device with Windows CE 5.0 Standard SDK for compile WinCE 5.0 standard SDK download link 3- ATL and MFC toolchains are not permited 4- and finally you should be able to run the below demo on WinCE: Demo 1: Demo 2: Demo 3: Demo 4: draw the Unicode text on screen in any style with given input file and
library source code : Requirement: 1- Compiling the source code as a static library (not Dll, just static lib with a header include file and folder) and not precompiled for windows CE 5.0 (called smart device in VS2008) 2- using visual studio 2008 smart device with Windows CE 5.0 Standard SDK for compile WinCE 5.0 standard SDK download link 3- ATL and MFC toolchains are not permited 4- and finally you should be able to run the below demo on WinCE: Demo 1: Demo 2: Demo 3: Demo 4: draw the Unicode text on screen in any style with given input file and
