Vb6 stepper motor controller jobs

Require a draft sketch of the attached - Drawing Emphasis: The focus of measurements - Skillset: Candidates with proficiency in mechanical engineering and a specialty in structural components are encouraged to apply. Prior experience with motor base designs will be a significant advantage. Your task will be to create a functional and practical design, and your insightful input will be of great value.

Develop schematics, PCB and firmware for a compact NFC reader. The suggested RFID controller is PN7160. Microcontroller - STM32 0) Two boards - antenna and the main board. The antenna diameter is 15mm with a hole in the center 4-5mm. The main board is 14mm in width and length is 35mm or less. 1) The reader must read and write password-protected memory blocks in Mifare Classic cards. 2) The reader keeps the password for the RFID cards as a hard-coded constant. 3) The reader has an 4-byte reader ID stored in its EEPROM memory. 4) The RGB LED on the edge of the main board, whose location matches the hole in the antenna. RGB LEDs are connected to the PWM pins of the controller. 5) A waterproof (if possible) speaker must be on the opposite edge of the main board, closer to one si...

...fabrication to create a custom controller for my shop. The primary objective of this task is automating some key processes, with a special emphasis on security. Below are the specifications for the PCB controller: • Automation of the security system: This project requires designing a custom PCB controller which will integrate with various elements of the security system for automation. • Incorporation of alarm systems: The controller should easily synchronize with alarm systems, enabling automated responses in case of triggered alerts. • Seamless integration with access control systems: I wish to automate the access system in my shop, hence the PCB controller must be compatible with modern digital access mechanisms. • Door sens...

I'm seeking an intermediate-level programmer with experience in Embedded C and 8051 Microcontroller. The project involves designing a system that takes input from 3 sensors and controls an actuator (motor). Key Requirements: - Design a system on 8051 Microcontroller - Program the system in Embedded C - 3 sensor inputs and motor output - Intermediate experience level - Assist in sourcing necessary components I have a strong preference for someone who has worked with 8051 Microcontroller and has experience with designing systems that integrates sensor inputs and actuator outputs. Your role will involve both programming and assisting in recommending and sourcing the necessary sensors and actuator for this project. If you're experienced in these fields and can comm...

... -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that are already spec'd. You will need to spec the PSU, and design the PCB board for the micro contro...

I'm in need a freelancer to assist in the comprehensive design and develop...strong focus on engineering, able to create systems that are energy efficient and innovative. - Innovations: This is an important aspect of the project. We're looking for a team that can bring fresh ideas to the table, with a particular interest in self-driving capability, voice control assistant, wireless charging, advanced safety features, and an innovative AutoCharging system using the car's tire motor. Ideal freelancers for this project should have experience in: - Industrial design and 3D modeling - Mechanical and electrical engineering, particularly in the automotive industry - A creative and innovative approach to design, with a keen eye for detail - Past experience with similar proj...

...values of the discrete component and use a much better MOSFET to meet the required output of 600V AC, 0.5A, 39kHz Responsibilities: - Improve the LT Spice model for the half-bridge circuit (no rectifier needed), Output is AC and not DC - Conduct detailed simulations to analyze performance - Optimize circuit design based on simulation results The MOSFET part number is SIHP24N80AE-GE3, The PWM controller that will send the pulse to the gate driver is UCC28086D, and the isolated gate driver UCC21550BQDWRQ1. It would be good to use parameters from these components where applicable for a representative test. For example, changing the MOSFET to the one with low Rds On - Drain-Source Resistance will give square output at the section labeled square wave. I have also attached the type...

I'm seeking a skilled robotics engineer to simulate basic robotic movements in Gazebo. My project's scope includes: - Engineering a robotic system to perform automated maneuvers. - Implementing basic movements such as forward motion, turning, and stopping. Your expertise should ideally include: - Proficiency in robotics engineering inclusive of controller expertise and Gazebo simulation. - Familiarity with automated systems and their movements. I anticipate this project to be less complex but I demand accuracy in basic functions.

I'm in need of a web developer with experience in ASP.NET MVC (Model-View-Controller) web framework to create a news-focused informational website about video games. Specifically, the site will concentrate on video games news. The successful candidate should possess the following skills: - Strong proficiency in the ASP.NET MVC framework - Understanding of news website structure and functionality - Knowledge or interest in video games would be beneficial - Previous experience in designing and building news-websites would be a significant advantage The website should have an engaging, easy-to-navigate user interface that offers a seamless user experience. A keen eye for attention to details would be appreciated. The point is to make the latest gaming news easily accessible and...

I have a Windows 2019 Server acting as a Domain controller to which I have administrator privileges. My PC connects to the Domain and there are 3 users who logon to the PC/Domain. They are Michael, John and Peter. I want to set a default username for the PC in the format DomainMichael so that no matter who logged on last, whenever they logout then the logon screen will always show DomainMichael. Ideal skills & experiences: - Proficient with Windows Server 2019 Active Directory and Registry Editing - Experience in creating new user accounts with specific permissions. - Attention to detail to ensure the username is configured correctly. Looking forward to your bids.

I'm looking for an experienced Avaya specialist to assist with the configuration of our Avaya Session Border Controller (ASBCE) - specifically, to set up and integrate it with SIP Trunk Provider lines and Avaya IP Office Server Edition. AVAYA IP Office servers are already configured and calls working internally. - The tasks involved are both the installation of the ASBCE and the setup and integration with the SIP Trunk Provider. This requires a comprehensive understanding of both Avaya systems and SIP technology. - The primary goal for this configuration is to achieve a seamless integration between the ASBCE, the SIP Trunk Provider, and our Avaya servers. The focus is on ensuring robust communication and operation between these systems. - Basic training on how to restrict ex...

I'm looking for a skilled Visual Basic 6 programmer to adjust functionality within my VB6 source code. The task primarily involves expanding reporting functions to include more tables. Ideal applicants should have: - Extensive experience in VB6 programming. - Previous work involving functionality adjustments, particularly in Reporting and Data Management. - A keen eye for detail to maintain existing code integrity while implementing changes. - Strong understanding of data management and manipulation in VB6. Your role will be solely focused on altering the existing VB6 code and ensuring the changes don't disrupt the software's operational flow. Familiarity with VB6 and past projects involving Reporting changes are crucial.

Hi there. I'm running XCode 15.3 and I need a few pages done with simple, clean storyboards and View Controllers. I use Alamo Fire and Swift, so if you could use that to pull my data via my API links and display it in several pages that would be great. Categories > Collections > Items > Item Details You select one and it shows a list - Item Details is one record from a MySQL db I need each selected item to be a variable in the code of the ViewController so if I use the print function, I can see it at the bottom of XCode. I'll give you the 3 or 4 API webservice links. I can give you a super simple app to put it in too...

I need assistance with calculating the correct motor size and torque requirements for an industrial application. Key Job Details: - Use your expertise to analyze the load the motor will need to move. - The ideal motor should be able to handle the load efficiently and effectively. - I'll need detailed calculations (with reference) to be shared at the end of the project. Preferable Skills: - Experience in industrial machinery - Expertise in motor sizing and torque calculation. The motor will operate in a standard factory environment, moving a load that is constant and predictable. I would appreciate it if you could provide examples of similar projects you've worked on in the past. Attached is a similar project example.

...identified to be: Drag, Rolling resistance, Incline, Wind & Motor thrust. Rolling resistance, wind (set to 0 in data should be okay to plug values in later) and incline forces have been resolved in an excel file for every data point (every metre). Drag and motor thrust which depend on the current velocity of the vehicle (see matrix explanation below). The first lap is different to the remaining 9 laps, you can work around this however you like but, please ensure you use the correct data. Furthermore, all the constants relating to the vehicle forces must be able to be changed directly from an excel file page called constants. To find the optimal solution you must use some sort of genetic algorithm (explained with flow diagram) that turns the motor on twice per la...

I'm looking for a skilled electrical engineer who can help me with the design of a high-torque electric motor for a cart. Key tasks involved in the project will include: 1. Electrical System Analysis: Understanding the system needs and constraints to design an effective electric motor. 2. Circuit Design: Developing a circuit that will be optimal for the high-torque motor. 3. Troubleshooting and Repair: Providing solutions to potential problems experienced during testing and implementation of the design. The electric motor design needs to account for the following specifications: - Power Rating - Speed - High Torque Engineers with experience in design and development of high-torque electric motors will be preferred. A strong understanding of both theore...

I need a logo for my motor company specializing in car repairs. - I'm looking for a unique and professional design that captures the essence of our business - Open to creative interpretation, but ideally, it should reflect our industry - Looking for a logo that can be easily recognized and remembered Ideal skills and experience: - A strong portfolio of previous logo design work in a similar industry - Proficiency in graphic design software - Ability to work autonomously and provide fresh, innovative design ideas Attached is an older concept we had

I looking for someone to design a PCB to include an MCU, Wifi module, and some headers Key Requirements: - The PCB should have an STM32 microcontroller (MCU) to carry out basic functions. - The design should incorporate an ESP32 Wi-Fi module for internet connectivity and a motor controller. - The complexity of the project is minimal. Deliverable: Using EasyEDA to design the PCB, I ask to receive a copy of the project, Gerber files, BOM, Pick and Place, and any other files required to manufacture the PCB. Ideal Freelancer: - Proficient in PCB design. - Experience with integrating MCUs and Wi-Fi modules. - Able to deliver a simple, no-frills design that works effectively. Please provide me with your quotes and examples of relevant projects you have worked on.

I'm in need of a seasoned VB6 professional to assist with encryption and compression functionalities within my project. Key Requirements: - Task: The primary task is to implement encryption and decryption, along with compression and decompression, in the existing project. - Data: The encryption and decryption will primarily focus on text data. - Implementation: I specifically require the use of AES, Huffman, Inflate and Deflate, and GZIP mechanisms for the encryption and decryption process. Ideal Skills and Experience: - Extensive Experience: Strong experience with VB6, particularly in encryption, decryption, compression, and decompression. - Specific Knowledge: Proficiency in implementing AES, Huffman, Inflate and Deflate, and GZIP in VB6. - Industry Best Pract...

...Simulink and PID control systems to develop a model for the active suspension system of a vehicle, with a particular focus on using electromagnetic actuators. While I'm not completely certain about specific performance targets, I would like the model to be versatile enough to prioritize either ride comfort or handling performance. The base model is provided, this is missing an actuator and the PID controller which is required by you. Expected deliverables: - A thoroughly tested and validated Simulink model for the PID control of an electromagnetic actuator based active suspension system as mentioned in the document. Ideal skills and experience: - Extensive knowledge in PID controls, specifically for suspension systems - Proficiency in Simulink and system modeling - Solid ...

I'm in need of a talen...in need of a talented data scientist with a strong background in natural language processing and deep learning. The goal of this project is to develop an efficient and accurate ML model that will estimate the temperature of the Electric Motor dataset from Kaggle. Key requirements include: - Utilizing natural language processing techniques to analyze the time series data provided - Employing deep learning methodologies to ensure the model is robust and performs well - Ensuring the model is able to accurately estimate temperature from the Electric Motor dataset Your expertise in natural language processing, deep learning, and time series data analysis will be crucial for the project's success. Please only apply if you have a proven t...

I'm in need of a programmer who is skilled in C++, Python, and has experience with PIC Kit 2 microcontroller. The job entails both programming the PIC Kit 2 and working on a specific project involving its application. Ideal Skills and Experience: - Proficiency in C++ and Python. - In-depth understanding of microcontrollers, with specific experience in PIC Kit 2. -...project involving PIC Kit 2. -Ability to understand PLC logic along with programming. Please note that I'm looking for someone with a strong background in these areas, as the project may involve complex programming tasks. If you believe you have the necessary skills and experience, kindly reach out to discuss the project in more detail. We are working on IC (PIC16F772) for automatic water level controller, v...

I have a C project on CCS that controls motor speed using DRV10970EVM board and LAUNCHXL-F280049C board. I'm looking for a skilled developer to help me customize this code. Key modifications needed include: - Reading the motor speed - Enabling user input via UART interface - Allowing the user to set their desired motor speed using the UART Ideally, you'll have experience with: - C programming, particularly in the context of microcontrollers like LAUNCHXL-F280049C - Motor speed control systems - UART communication - Embedded systems development Your task is to make these modifications to the existing code, ensuring that the system remains stable and reliable. I have a document with more detailed explanation i can send as well.

...create a unique and engaging colouring book for toddlers (ages 2-4), with animals as the central theme. The ideal candidate should have a good understanding of early childhood education and be able to balance both educational and fun elements in their design. The book should: - Feature a variety of animals that are recognizable to toddlers - Include simple patterns and shapes to encourage early motor skills development - Be a mix of educational content (such as color recognition, basic animal facts) and engaging, playful elements - Have clear, bold lines and designs that are easy for toddlers to color within Ideal skills and experience for the job: - Proven experience in illustrating for young children - Understanding of early childhood development and education - Ability to de...

...the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs: 6 Analog outputs: 2 Key deliverable: A fully programmed NUCLEO-G491RE STM32 and ESP32-DEVKITC-32UE microcontroller that controls a sliding gate according to an already provided functional description (fragments of this description in the attachment). More detailed information concerning the functional description will follow, when discussing the task. Description of the project: Movement control: The controller coordinates the motion of the cantilevered gate, prompting the drive...

I'm in need of an Arduino expert who is adept at programming a small Arduino circuit to control LEDs, a motor, and sound. It will be integrated into a small, Matchbox/Hot Wheels-sized fire truck. The LEDS will flash alternately to represent the emergency lights. The motor will power the back wheels and the sound will play through a small speaker as a siren and horn. Here are the requirements for the project: I believe the Arduino MKR Zero would be a good fit since it has the integrated micro SD card holder and sound processing capabilities. It also has an integrated battery charger. The Arduino needs to be powered by a rechargeable Lithium Polymer battery like 3.7 Volts. - Control LEDs: I believe I can get by with two white 3mm LEDs. I will install fibre-optics to tr...

...out unnecessary messages and optimize system performance. Responsibilities: Apache Kafka Setup: Install and configure Apache Kafka on a Windows machine. Set up the necessary Kafka topics, partitions, and brokers to support distributed messaging. Ensure proper security configurations and access controls are in place. Master Script Development: Develop a master script that acts as the central controller for the messaging system. Implement functionality to bulk-review messages in the queues every 10 minutes. Design and implement filtering logic to identify and remove unnecessary messages based on predefined criteria. Coordinate the distribution of messages to worker scripts for further processing. Worker Script Development: Develop worker scripts in Python to process messages r...

I am seeking a professional and capable freelancer to create a home automation system using Arduino technology. The system should incorporate ...should incorporate some form of MIDI control for traktor Dj software - **Expertise Required** - Strong knowledge of programming Arduino. - Prior experience in home automation design and implementation. - Proficiency in achieving interoperability between different smart home systems. - Familiarity with MIDI controls. - **Key Features** - The use of knobs, faders, and buttons on the MIDI controller to enable intuitive interaction with different systems. - Lighting control: an easy-to-use and versatile system to control various lighting fixtures around the house. Please provide examples of similar projects you have completed p...

I'm in need of a skilled professional who can create a WiFi controller with a QR Code generator for my Aruna 9012 default captive portal. Key Project Requirements: - WiFi Access Control: This system should allow me to control access to my network based on both time and specific user permissions. - QR Code Generation: The project will require the generation of various QR code types: - Static QR codes: These QR codes will be unchangeable and ideal for permanent access of the network. - Dynamic QR codes: These QR codes must be generated on the fly and will allow immediate, temporary access to the network. - Customized QR codes: I would also like the ability to customize the QR codes with my branding or other information. Skills and Experience: - Proficiency in WiFi ne...

Hello I'd like you to create an ePaper module PCB used for an electronic shelf tag based on the ESP32 chip. This device is similar to what you would find at a modern retail store, dynamically updating the tag as prices change. Attached are schematics and references for my desired components. I'd like to use the new ESP32-C6-MINI-1-N4 unit as the main controller, as I'm very familiar with ESP programming already, and want to take advantage of its many connectivity options including BLE, Zigbee, and Thread. The ePaper display itself will be the Pervasive 2.13" display using the ZIF25 connector and SPI protocol. Schematics and additional reference details are attached, please read these carefully to ensure the ePaper display module functions accordingly. It will ...

I'm in need of someone who undrestands Windows Certificate Authorities. I am trying to setup Windows Hello For Business but am getting a KDC error: The client has failed to validate the domain controller certificate for SERVER.DOMAIN.local. The following error was returned from the certificate validation process: The revocation function was unable to check revocation because the revocation server was offline. Key Requirements: - [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions] - This environment requires me to control the input. This means I can only give you view only of the server.

...facing difficulty getting the petrol pump controller to communicate with the local MSQL database. Key Points: - The PC is running on Windows XP. - The petrol pump controller uses a serial port for communication. - The issue lies in configuring the connection between the petrol pump controller and the MSQL database. Requirements: - You'd need to have a strong grip on database management, particularly with MSQL. - Proficiency in networking and serial port communication is a must. - Experience with Windows XP is preferred. - Troubleshooting skills and experience in resolving connectivity issues will be highly valued. The ideal candidate for this project will be able to quickly identify and resolve the issue, ensuring that the petrol pump controller can ...

Wiring Schematic of an Agricultural Articulated Truck (Tractor), new project needs schematic and design. Key Components: Power Supply: Battery Alternator Main Circuit Breaker Lighting System: Headlights Tail Lights Work Lights Indicators Control Systems: Ignition Switch Dashboard Control...Agricultural Articulated Truck (Tractor), new project needs schematic and design. Key Components: Power Supply: Battery Alternator Main Circuit Breaker Lighting System: Headlights Tail Lights Work Lights Indicators Control Systems: Ignition Switch Dashboard Controls Relays and Fuses Engine and Transmission: Starter Motor Engine Sensors Transmission Controls Hydraulics: Hydraulic Pump Controls Joystick Controls Hydraulic Solenoids Auxiliary Systems: Air Conditioning Horn Wiper Mot...

I'm seeking an academic researcher who can delve into the intricate world of MICROGRID WITH PV , MPPT CONTROLLER , EMS (energy managemt system) solar energy. The ultimate goal of this research is to produce an article or paper that meets Scopus standards with simulation by Matlab. Condition The researcher should have published papers closed to MICROGRID and EMS. Please share your Google scholar profile.

I need to create a small educational program for work related to PLC. OBJECTIVE: I need to do a job, where a program reads 3 numbers and sorts these 3 numbers in ascending or descending order, and checks which one has the highest value. The software to be used is OMRON's CX-Programmer. The controller would be Omron's CJ1M. This work is for educational purposes so it should be simple but well structured. The structure of the program should have some similarities with the attached images (ATTACHED IMAGES ARE AN EXAMPLE ONLY)! Please try to use simple or the more commun functions. As it is an educational program, it must be as simple as possible, but at the same time it must be well structured to presentation. Thanks IMPORTANT: The software to use is CX-Programmer (v9.73)...

I need a comprehensive predictive modeling using regression models specifically tailored for industry-specific data. Key Requirements: -Expertise in industry-specific data handling and analysis -Precision in building and executing regression models -Sound understanding of predictive modeling techniques The ideal freelancer should have a solid portfolio in statistica...analysis -Precision in building and executing regression models -Sound understanding of predictive modeling techniques The ideal freelancer should have a solid portfolio in statistical modeling, particularly in regression and predictive analyses involving industry-specific data sets. Specifically they should should have an in depth knowledge of Generalised Linear Models used in evaluating risk in the Motor Insuranc...

Need some to program me a small function in this sdk to add RFID verification & then open gate for the user using following SDK.

...100 forwarded ports OR a dedicated IP for each server. Each server requires: - 16 GB of RAM per GPU - PCIE 4.0 x8 / 3.0 x16 bandwidth per GPU - At least 8 CPU threads per GPU - ***A graphics device that will not be passed through for customers, e.g. an old GPU, the integrated graphics of a CPU, or of a motherboard that supports it (e.g. the Asrock Rack ROMED8-2T comes with an onboard graphics controller)*** Ultimately, this will be a marketplace for compute. People will pay less for a virtual machine with a GPU with inadequate bandwidth (e.g. PCIE 3.0 x4) than a GPU with adequate bandwidth (e.g. PCIE 3.0 x16), as they'd be able to run more intensive workloads. The quality of your hardware will determine your earnings. need hosts to have integrated graphics, another older...

Further development charge controller ISO15118

Creating a library to control the TMC5160 using only the SPI bus. The library must be ESP32 compatible and will not use other similar existing libraries for other TMCs. It must include: - basic functions for motor setup and movement, positioning - advanced functions such as CoolStep, StallGuard2, SpreadCycle and StealthChop2 - sensorless operation to find home position (StallGuard2) - the library must not block additional ESP code during motor running and control (delay commands etc) and must support running of multiple motors simultaneously (using CS signal) - deploying the library in VS Code + PlatformIO The library functionality will be tested on a TMC5160 BOB + NEMA 8 (8HS15-0604S).

I'm looking for an expert to help me set up a Human-Machine Interface (HMI) to control AC motors on a test bed. Specifically, the motors to be controlled are AC, and the primary goal of the HMI will be to adjust the motor parameters. Key Requirements: - Proficiency in setting up HMIs for industrial control systems - Experience with AC motor control - Knowledge of KEB F5 drive control is highly beneficial Communication Protocol: As I have no specific preference for the communication protocol, I am open to suggestions based on your expertise and experience in this field. Please provide details of your relevant experience and how you plan to approach this project in your proposal.

I'm looking for a skilled and creative drone designer to help me create an innovative outdoor drone. The drone's primary function would be to fly in a loop over a designated area for approximately 30 minutes. Key Requirements: - I'm looking for a drone that can be launched out of a tube using an electric motor. It should be able to withstand outdoor conditions. - The drone should have a flight time of 30 minutes. - The drone should be able to fly in a loop over the designated area. Ideal Skills and Experience: - Proven experience in drone design, particularly for outdoor use - Innovative thinking and the ability to think out of the box - Strong understanding of aerodynamics and flight mechanics Please share any relevant experience and your proposed de...

Create a new version of our existing ABCs feature with images instead of static letters. This page should be created with Storyboard and a View Controller in Swift for iOS XCode. And it should work in both iPhones and iPads and be a full-screen page with a white background - image in middle and arrows on left and right.

Seeking someone with skills in Arduino and MIDI technology. Your task will entail creating a connection between LoraMidi AtMega1284P and Arduino IDE. The main objective here is to control MIDI devices using this interface. What I Need: - Develop a way to control LoraMidi AtMega1284P using Arduino IDE - Enable wireless transmittance of MIDI data - Develop a custom LoraMidi communication protocol Ideal Freelancer: - Proficiency in Arduino IDE - Familiarity with LoraMidi AtMega1284P - Experience in MIDI technology There is not a strict deadline for this project, and we can prioritize quality deliverables over speed. Please submit your proposal detailing how you intend to accomplish the indicated tasks.

In need of a talented video editor and script maker for my project which will be focused on the promotion and education of current trends within the automotive industry, specifically aimed at motor fans, car fans, and dealers. Your task will primarily involve: - Creating engaging content about recent car reviews and ongoing trends in the industry. - The videos should not just be entertaining but also serve an educational purpose, ensuring our abrasive audience is well-informed and knowledgeable. Ideal Skills Required: - Proficient in video editing software. - Exceptional scriptwriting ability. - A deep understanding of the automotive industry. - Proficiency in Arabic language is preferred. - Affinity with automotive fans and an understanding of their interests. If you believe yo...

I need to create a small educational program for work related to PLC. OBJECTIVE: I need to do a job, where a program reads 3 numbers and sorts these 3 numbers in ascending or descending order, and checks which one has the highest value. The software to be used is OMRON's CX-Programmer. The controller would be Omron's CJ1M. This work is for educational purposes so it should be simple but well structured. The structure of the program should have some similarities with the attached images (ATTACHED IMAGES ARE AN EXAMPLE ONLY)! Please try to use simple or the more commun functions. As it is an educational program, it must be as simple as possible, but at the same time it must be well structured to presentation. Thanks Regards

I'm looking for an experienced web developer to create an e-commerce website for my business. The site should be able to handle transactions with credit cards as the main payment method. develop a website throw WordPress already we have account, also we have domain + hosting in GoDaddy, I attached here a sample of website, we need a website design and platform similar to this one, we will...There will be no charge for delivery (free delivery), and this should be clearly visible to customers. - There should be options for delivery or pickup from the main branch in Baniyas, I will share the location with you later. - Customers need to enter their name and number. - A platform to receive orders is also required.

I'm in search of a skilled cybersecurity writer to create a comprehensive article on PLC (Programmable Logic Controller) Algorithm Security for a professional audience. Requirements: - The article should delve into in-depth technical analysis, offering thorough insights and understanding of PLC Algorithm Security. - The preferred word count for this piece is 1000 - 1500. - The target audience is primarily cybersecurity professionals; the content should be engaging and informative for this group. - A clear focus on critical insights and mitigation strategies in the realm of PLC Algorithm Security is a must. Ideal Skills and Experience: - Proven track record in cybersecurity writing. - An understanding of the nuances of PLCs, industrial automation, and cybersecurity. - Ability...

I'm in need of an Arduino Programmer with expertise in DC motor control, programming logic, and inductive proximity sensor integration. Specific tasks include: - Programming logic for the DC motor microcontroller - Integrating an inductive proximity sensor for object detection - Implementing a speed regulation function (slow start, slow stop, foward, reverse speed and delay start) for motor control Please find the project detail on the attached document.

I have 2 issues that are occurring with my app. Both of these issues are now happening on my app in the store when no changes were made. In other words, these crashes are not from any changes I made. It just started to not work. The first issues occurs when trying to login. It is timing out. This is the second error ...raitCollection(UIViewController *__strong, UIApplicationSystemVersion)(), UIViewController.m:2749 *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'UIViewController is missing its initial trait collection populated during initialization. This is a serious bug, likely caused by accessing properties or methods on the view controller before calling a UIViewController initializer. View controller: <Se...