Arduino http jobs

Looking for professional eng with experience in filtering and masking CAN protocol, Arduino programming and able to send packets using the sara - r5 LTE chip

We have a requirement for integration of an IoT Gateway that sends data of different devices over HTTP as a JSON packet. The developer should be able to create an UPLINK data converter code in Javascript, which should be able to extract individual devices & it's data with a unique "mac" and forward it to the pre-created devices in the Thingsboard board platform. More about the HTTP converter:

We have a requirement for integration of an IoT Gateway that sends data of different devices over HTTP as a JSON packet. Therefore; we would like to build an UPLINK converter on the Thingsboard IoT Platform for the same. The sample JSON packet is attached to the below link. The developer should be able to create an UPLINK data converter code in Javascript, which should be able to extract individual devices & it's data with a unique "mac" and forward it to the pre-created devices in the Thingsboard board platform. More about the HTTP converter: I am looking forward to a long-term association for developing software solutions in IoT Space.

We require a embedded software developer to examine the program and change it according to the new PCB also require you to write libraries and working code without altering the other functions. The component in question that has been replaced is a capacitive sensor IC used for touch buttons. Please bid only if you have good knowledge and experience working Atmel studio, Arduino IDE ,Atmel and Arduino libraries ,ESP and atmega controllers , capacitive proximity sensing ICs. We need you to coordinate with backend developers and mobile application developers to test the functionality We have multiple development projects upcoming and you could be our preferred freelance team member. We could Discuss on the Pricing and come up with a mutually agreeable figure.

Need a code to download a captcha and then download a file using the following data parameters from the above url. Click on [TAN Based View] —--------------------------------------------------------------------------------------------- Tan No : MUMN08326D From date : 01/04/2022 To date : Current date default Captcha Code: [ Submit Button ] Need to pass all the above parameters with the and the captcha code and download a file. Code should be in Asp.net Webforms.

Hi Mestek, are u good in arduino and IOT?

We would need to create a hardware to sit on a raspberry pi or an arduino and connect to vending machines control boards. We would like to read data from the vending machine through the MDB protocol and send instructions to the vending machine. Above is the requirements. Please don't bid on this project unless you got previous experience with mdb protocol.

I have EC20 GSM module which i would like to test with arduino/STM32 and than finally custom board with atmega328/STM32 and GSM module

NOTE: See attached doc for a lot more detail. TL/DR: Need a simple android application to use with a set of 4 Arduino Nano BLE (or any Arduino with Bluetooth Low Energy) devices used for gathering Temp, Humidity, Barometric pressure, etc.. App needs to be able to pair up to 4 devices, and needs to be able (when button is clicked) to record data sent over (in sequence) to a local SQLite Database that can then be sent via email (App does not need to be able to send the file, user can do this on their own, SQLite file just needs to be saved somewhere easily accessible). Deliverables: * Source code that will compile from Android Studio and run on a Galaxy Note 10 or newer

I want an android application (android studio (java) ) with source code ,that connect with IOT devices(arduino code) and operate the Motor /pump(demo) automatically like if the water level inside tank is upto 90/100% then turn off motor automatically and when water level is upto 10/20% then turn on the motor automatically .also for the user to operate motor manually then on/off button require .

Porting of this application to Arduino: Example port of an end-of-life, similar library for Arduino, same application: The supplier of this library does not support Arduino anymore in its latest products. We have legacy products on the Atmega2560 based on Arduino boards. I want to investigate if a port of the current library is possible. We have 8KB of RAM on the atmega-2560, so this should be sufficient. No double or floating point numbers are used in this application. What I expect as issues? -> avr-g++ version of CPP? Is the supported version high enough for this library? If not, there is a plain-C library

We have 2 ino file eeprom 500 line sketch 1 159 line sketch 2

...over chat? The project involves building a device using Arduino Uno. The project has 2 subsections. 1. Designing of the hardware 2. Writing the code for the arduino. 1. Designing the hardware The hardware is a modification of an Arduino stopwatch available online. The device shall consist of a Keypad ( 4*4) and a display. The display shall print the instructions and any input is to be given through the keypad. While the stop watch shall be started by input from the keypad, it shall be automatically stopped when a reed switch circuit is completed. After 3 trials, the device shall calculate an output and display it. 2. Writing the code The code shall be written for the Arduino Uno. The process is as follows. On starting the Arduino shall displa...

I need an arduino sketch for the LilyGO TTWATCH 2020 v1 so that: -TT Watch can connect to a local access point -An IP address can be defined for the TT watch. -A topic to subscribe can be defined for the TT Watch. -TT Watch uses Deep Sleep to improve battery performance. -TT Watch displays MQTT messages on the screen.

GUI based Arduino Code C++ GUI visual is c#

Please Sign Up or Login to see details.

I have a Mega arduino that works fine with a analog to digital converter that has a SPI interface. When I tried to migrate to a ESP32 it fails, I am using a login analyzer and I am still not sure what is wrong. I need some help to debug this.

The task of the camera is to photograph a document from a very close distance, and there is a mechanical movement that wipes the entire area and turns the document into a pdf file and send it to app app must control x u z motor and camera iv wifi

i need help assembling my arduino project in the bread board

1. Locking mechanism using solenoid lock and arduino. 2. LED screen to display instructions 3. Buzzer to tell if the entered password is wrong. 4. Keypad based 4/6 digit password. 5. 2 layer security that is it required 2 passwords to open the lock . 6. Facility to change both passwords. Flow :- Enter 1st password - if PW wrong - buzzer - if right - ask for 2nd password - if 2nd PW wrong - buzzer - if right - solenoid lock opens …. Additionally :- facility to change both passwords … Hardware :- Arduino UNO , Solenoid Lock , Keypad , Relay , LED screen ….. Reqmt :- 1. Complete working code 2. Circuit diagram for connection of hardware …

I have a 4 mecanum wheel robot chasis bought from here :g:OqkAAOSwqHNgUGaW&amdata=enc%3AAQAHAAAA4K2Vd0oSs6Oq3C0Pb8UTJ%2BPYvyskf1Du4bKsrh%2FRX%2B5nVrkaOQ3OQ%2Fa9S37OtjZjOn65IA9zsyD7GmaoTbOgp1%2F23kaDn2YrgghdiAj2Gz%2Bgqw%2FwjsDIqjpuO%2FsQrQkQXCFUM%2FytyTL0EveE6PNumRftI9PjWjE%2Fl4m6w%2BTZjZs6gtTx77a3Y%2F2uZl3ZZLrc%2Fs48dApEyCaWcyFgmYJ8D...out of the box. Some issue in PS2 controller part needs to be debugged. I can remotely show the issue and would like assistance who has already worked on PS2 and macenum robot of a similar type. Please mention your previous experience when bidding as I will only reply to one who has firm knowledge about this. Before replying also go through this rep

Hi Sardar Hasnain A., I need you to work on an arduino code to use to relay switches modelling three rooms lightening and fans.

Hello, I'm looking for some firmware engineer who could help me edit cosmetic stuff which is displayed on tft screen through esp32. Previous programmer left the job uncompleted and I need someone to finish it. Also this is long term project and after finishing this stage I will need some more work to do. Also I need to warn you that I have absolutely zero experience in all that engineering stuff

Looking for a software that to install on a server that will act as a broker for http requests. Example device1 sends URL action to broker broker receives message that triggers a GET request to device2 server2 responds to broker and broker re-formats response and sends back to device1

A hydrophonics controller will be connected to esp32 in order to have remote data loging and control, scope attached

Hi macroenergy, I noticed your profile and would like to offer you my project. We can discuss any details over chat. Your qualifications in Arduino and motor control will be needed

Requirements 1. A simple progressive web app (PWA) that can connect to a Bluetooth (BLE) device (this will be a BLE enabled Arduino Nano for testing). Note that connections must be possible for both Android (Chrome browser) and iPhone (using the Connect browser on iPhone) 2. Code for the Arduino to send and receive data via the BLE from a table of event data which contains • A date and time stamp • A number in the range 0-255 (each number representing a different event type) The number will be entered into the Arduino using the serial console, and the date/time need to be assigned automatically in some format (accepting that the Arduino does not have a real time clock) 3. The PWA will receive data from the BLE device in the form of • A device id...

Hello developers I need help coding and arduino and hmi. so can control a motor and a sensor with the hmi. Thanks

Write code to calculate vertical displacement using MPU6050 sensor. Code shall integrate the acceleration on the MPU6050 accelerometers to calculate distance moved in the x, y, z direction. Code shall use the MPU6050 gyroscope to know which way is vertical (i.e. axis parallel to gravity, g). With information from gyroscope it shall then be able to calculate distance moved in the g direction i.e. the vertical displacement . To test the code I will: - lift the MPU6050 1 meter off the ground - the vertical displacement shall read 1 meter. - I will then put the MPU6050 on the ground - the vertical displacement shall read 0 meters. - I will then lift the MPU6050 1 meter off the ground in a different orientation - the vertical displacement shall again read 1 meter. - I will then place MPU605...

Arduino stepper project I need a capacitive touch (like TTP223) which, if hold down for 5 seconds, turns the whole device on and off. i also need a screen (EDO E1473AC63) with three buttons designed, a bar to indicate the battery level and a bar to indicate the stepper motor effort. if the buttons are kept pressed, they activate the stepper motor. the engine starts only if the button on the display remains pressed. if the button is released, the motor stops. There are three because they have different acceleration and maximum speed. acceleration and maximum speed must be set from a smartphone that communicates via bluetooth with device. I also need a function that if I press three fast touches on the display with two fingers, the motor moves to the zero position (the zero p...

Need to build a bluetooth app that connects to hm-10 bluetooth, similar to hc-05, arduino code for connection will be provided. need to build bluetooth iphone app simple easy app.

Looking for a creative engineer with experience in developing electronics projects using Arduino/ESP32 etc. Must have circuit design and basic programing skills for testing. - Purchase required material and test it as per application needs. - Finding and testing electrical/electronic/electro-mechanical components like motors, actuators, relay, Power supply, motor driver. - Circuit design and test it on prototype board/PCB design. - Circuit Validations and so on. - Create project feasibility reports - You must have your own Laptop/Computer - Software: Arduino IDE, Word, Excel, PowerPoints, We need someone who is adaptable, willing to start from scratch if necessary, and willing to work and coordinate with a team throughout the development process. We're looking for a l...

Need to develop a basic framework for communicating between 2 esp8266 devices ESP now should be used as a communication protocol Development will involve updating existing examples from provided by RTOS SDK and show communication between 2 devices both transmitting and receiving dat...existing examples from provided by RTOS SDK and show communication between 2 devices both transmitting and receiving data of about 100 bytes The example code needs to be updated for providing configuration of changing communication parameters (MAC address, baud rate) Messages should be sent and received by both the devices every 50 ms simultaneously The development should be done using RTOS SDK (NOT Arduino) Code should be structured and commented Hardware and necessary tools will be provided to the...

Code for arduino needed. I want to the machine to run until ice is ready to drop into container in short. What I want to do is use a sensor (it's just 2 copper pieces like screws) to connect to each other as soon as the ice is thick enough that completes connection to initiate the drop cycle. (contact with ice on sensor should be for 20 seconds incase false reading) After that it should activate a relay that controls the ice drop until it's finished. After ice dropped the sensor disconnects and relay switches off.

I am interested in getting a PCB Made. The PCB would be a production replica of an Arduino Project which had a 6 Axis Accelerometer, piezo vibration sensor and a memory card module

Build an Arduino device that can connect preferably using I2C to a GPS module, a GSM module with data and SMS connection, WiFi module, bluettoth module, Motion sensor, NFC module, Infrared module, Temperature & Humidty module, detect when a light switch has been turned on and turn on a light switch.

Hi Amjad S., I noticed your profile and would like to know if you can teach me arduino and raspberry pi. I am a curious electronicc and automation enthusiast

My project is about designing and implementing a 6 channel RF - Arduino transmitter and receiver. The channels will be: # 1, 2 and 3: Simple 1 or 0 (signal/no signal), #4: Microphone (analog or digital mike), #5: Square Wave, 20 to 10.000 Hz and #6: Arduino Gyroscope board signal (MPU6050 or similar). A good reference for it is: Thank you. Julian

I'm looking for electrical or electronics engineer (upto 10 freelancers) having sound knowledge of Arduino, Raspberry Pi, ESP32, ESP8266, etc. Please bid if you are available for long term Full Time position. Please start your proposal with the word "success" and share your past projects Looking forward to working with you

Please Sign Up or Login to see details.

Hi, I'm looking for software engineer (upto 10 freelancers) having sound knowledge of Arduino, Raspberry Pi, ESP32, ESP8266, etc. Please bid if you are available for long term Full Time position. Please start your proposal with the word "success" and share your past projects Looking forward to working with you

http://

I need a Arduino code to collect gps data from neo6m GPS module and publish it through the WiFi connected ESP32 to the aws iot core.

For detailed Functional requirements and test plans please read documents attached to the project in the Files folder. A Controller based on the ESP32 microcontroller with 4 Digital Inputs, 2 Digital Outputs, 2 Analogue Inputs for Temperature & Humidity. The Project must be developed on Visual Studio Code, with PlatformIO and Arduino Platform. The ESP32 will be configured as an access point. The project will include a Webpage with high security, there will be 4 button functions as below Open - When selected, will switch on Digital Outputs No 1 and No 2 and switch Off Digital Output No 3 and No 4 Close - When selected, will switch on Digital Outputs No 3 and No 4 and switch Off Digital Output No 1 and No 2 Auto - When in Auto mode the commands to Open and Close will be posted t...

Arduino and S7-1200, Using S7 protocol

I am using arduino mega right now which i would like to replace with arm which can be compatible with same arduino code.I need expert suggestion

Halloween project - have two 12v dc motors and a full H-bridge with PWM and current sensing. Need a program to turn each of the motors in the same direction for ~30 seconds and then each to turn in the reverse direction for ~30 secs. I think this is fairly easy to program but the delay command does not (in my hands) allow both sides of the H-bridge to function in unison. Thinking that millis(s) programming is needed. Can send more details on the H-bridge, although it is not well documented. Need the controller to operate independently and not need a manual switch to change direction. H-bridge description at:

I built an android during lock down. It is about 3 feet tall and has 26 full metal servos. The servo's are connected to two linked PCA9685 servo controllers. I have two Arduino Megas plus one raspberry PI (to control sensory input). It also has LIDAR and voice recognition/ I just need someone to pull all the bits together and program it to be autonomous

Hello. I have an integration between Dynamics 365 and my ticketing system. Integrating objects is working fine. I am successfully creating and updating Account, Contacts, and products in Dynamics 365, and having them add/update in my ticketing system. I am stuck on having Arrays under objects, in particular invoice line items. I have a flow already that uses the 'Apply to each' option in Flow, but its not sending all the details. The API details for invoice POST can be found in the link below. For now I dont need updating, just adding. When I create an invoice I want it to automatically create the invoice in my ticketing system with all the line items. I can arrange remote access to my PC for the works and show what I have already done. I am guessing this will be super easy...

I need a simple code in Arduino that reads any new order from woocommerce, and parse the Status of the order (Pending or Completed), and the Product Id. That info will trigger a relay/motor in the arduino. The data needed is available in the "woocommerce_payment_complete". The Arduino will communicate through a ethernet shield. Each Product id will be linked to an arduino pin (relay/motor). Each line of arduino scketch code must have clear comment. The code is very simple actually, so I need someone with ackowledge in PHP and Arduino scketch coding. This is just the begining of the hole project, a technical test to evaluate the executability of the concept. With that in mind, the hired developer will be the developer of all the fu...