Alter open source PCB design for arduino

Hi there,I'm biddin on your project "Alter open source PCB design for arduino"Electronics, Microcontroller, Electrical Engineering, PCB Layout and Arduino Interested in some design changes for the open source project 'trill bar' https://shop I have read your project description and i'm a Professional Engineer therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

Hello, Thanks for your opportunity. I checked carefully your requirements on this project. With more than 10 years working on PCB environment, I will help you finish this project with best quality and short time. Please take a look over on my profile for other projects' feedback. Look forward to hear from you. Thank you. Have a great day! Dang.

Hello there! My name is Metin and I'm excited to learn more about your project for Alter open source PCB design for arduino. I have extensive experience in electronics, PCB layout, Arduino and Embedded systems. With this combination of skills and experiences, I believe I can provide the best solution for your needs. I understand that you are looking to remove the onboard microprocessor and convert the trill bar to be a shield for an ESP32. As part of the project changes you are looking to make, I believe that it would be beneficial to have an onboard microprocessor removed so that the trill bar can be converted into a shield. This will allow users to take advantage of more features available through the ESP32 development board without having to worry about additional components needed to set up the system. Additionally, with my background in PCB design and Easyeda CAD files for manufacturers, I believe I can provide the highest quality results possible for your needs. Please feel free to reach out if you have any questions or would like me to provide any additional information about my skills or experiences.

Profile : ---------- over 18 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Designed PCB using Blind/Burried Vias - Back Drilling - Rigid Flex Stack - Castellated holes Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs ,signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation. Educational Background : ------------------------ Bachelor Degree in Electronics & Communication Engineering CAD tool supported : ----------------------- 1. PADS Layout 9.5 (Basic) 2. Pads VX2.1 standard / Pads Dxdesigner VX2.1 standard / Pads Logic 3. ORCAD PCB Designer Professional 16.6 4. ORCAD PCB Designer Professional17.2 5. Eagle 6. Kicad 7. Altium Designer 23 8. Diptrace Services Offered : ------------------ 1. Symbol Creation 2. Scheamtic Capture 3. Footprint Creation. 4. Place, Route ,Gerbers and TQ closure. 5. PCB Layout Review. Minimum Required Inputs : ------------------------- A top - level functional block diagram Schematic Netlsit BOM Mechanicals Impedance Information Current Consumption on each voltage rail. Target fabrication house - capability report

I am interested in working on the project! My experience in PCB design and embedded systems is extensive. In my offer I attach a video so that you can get to know my laboratory. I am available to expand all the details in the chat!

Hi there, I'm bidding on your project "Alter open source PCB design for arduino" Being a professional electrical engineer, I can do this project for you. please leave a message on my chat so we can discuss the budget and deadline of the project. Also, have a look at my profile for my reviews and portfolios. Thanks Note: This is not an automated bid and i'm ready to discuss your project right now. .. .

I understand you're looking for someone to make some design changes to the open source project Trill Bar, and convert it into a shield for an ESP32. You're interested in removing the onboard microprocessor so that the trill bar can be used as a shield instead of having its own internal processor. I'm a certified electrical engineer with deep experience in engineering, artificial intelligence, design, software development and hardware design. My core expertise includes electrical engineering, mechanical engineering and artificial intelligence. I have worked on numerous classified and strategic projects which makes me well suited to tackle this project. With my expertise in electronics, microcontroller and PCB layout I am confident that I can provide the necessary solutions for your project requirements. Please feel free to reach out if you have any questions or would like more information about my skills and experiences.

Best PCB Design Expert! ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Dear Client, With over 30 years of experience in electronics design, circuit design, and PCB design, I'm the perfect freelancer for your project. I'm excited about your request to alter the open source PCB design for the 'trill bar' project and convert it into an ESP32 shield. My proposal: ✅Analyze the existing 'trill bar' design and identify components related to the microprocessor. ✅Modify the PCB layout, removing the microprocessor and accommodating the ESP32. ✅Design and integrate necessary circuitry for seamless ESP32 compatibility. ✅Thoroughly test functionality and performance. ✅Provide comprehensive documentation of the changes made and the new shield design. I have extensive experience in electronics design and PCB layout, ensuring efficient completion of the project. Being well-versed in open source hardware projects, I understand the ESP32 platform thoroughly. Let's discuss your requirements and any concerns you may have. I'm committed to delivering top-quality results within the agreed timeframe. Please check out my profile for more details: https://www.freelancer.in/u/HarimohanG ⭐ ⭐ ⭐ ⭐ ⭐ ⭐⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, Arduino, ESP32, Microprocessor etc. I will provide: 1. 24X7 Live support 2. On Time delivery 3. 100% Satisfaction Thank you for considering my proposal. I look forward to discussing this project with you further. Best Regards Hari Mohan

I'm sure you're aware that the open source project 'trill bar' is looking to remove the onboard microprocessor and convert the project to be a shield for an ESP32. With my experience in Arduino design changes and PCB layout, I have the skills necessary to tackle this project. As an experienced and results-driven professional, I have developed a diverse skill set that includes project management, strategic planning, marketing, and data analysis. I would be delighted to help improve the open source project 'trill bar' and convert it into a shield for an ESP32. My organizational skills and ability to communicate effectively with stakeholders make me an excellent fit for this project. My data analysis skills make me particularly well suited to analyzing campaign performance and making data-driven decisions to optimize results. I believe in continuous learning and have a growth mindset that drives me to continually seek out new challenges and opportunities to expand my skill set.

I am dervis, a experienced freelancer with lots of experience in the area of industrial automation and field applications of small enterprises. I have worked on several projects in my working life and especially in the area of industrial automation where I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. My skills include electrical engineering, electronics, microcontroller programming, PCB design and more. This makes me the perfect fit for this project as I can provide exactly what you are looking for in terms of design changes and converting the Trill Bar to be a shield for an ESP32. I understand that you are looking to remove the onboard microprocessor from the Trill Bar and convert it into an ESP32 shield instead. With my extensive knowledge in electronics and microcontrollers I am able to provide exactly what you are looking for in terms of design changes and converting the Trill Bar to be a shield for an ESP32. Please feel free to reach out if you have any questions or would like additional information about me or my skills.

Hello. ⭐ ⭐ ⭐ ⭐ ⭐ I have been working for more than 10 Year in the field of Electronic engineering (Hardware / Firmware). I have extensive experience in the areas including Circuit Design, Circuit Simulation (Analog, Digital), PCB design, Embedded Software(Keil, Mplab, FPGA, ESP32, PIC, Rasberry PI, C/C++) etc. Expect me to help your business as if I am growing my own. I would love to hear from you. Warm regards Khalid

I am sure that you are looking for someone who can help you with your project and I am here to offer my services. As a mechanical engineer with a specialization in mechatronics, I have extensive experience in designing electronic boards using Altium Designer. My area of expertise includes single-sheet to multi-sheet schematics, single/double-sided and multi-layer PCB layouts as well as typical data and control interfaces like UART, USB, SPI and I2C. Additionally, I have extensive experience in power supply (SMPS & LDOs) as well as digital video, audio and multimedia interfaces such as HDMI, MIPI DSI/CSI and I2S. I believe that my skillset makes me the perfect person to help you with your design changes for the open source project 'trill bar'. With my help, we can convert the trill bar to be a shield for an ESP32 without the need for an onboard microprocessor.

Hello I have many experiences working for 4+ years with Circuit design, Sensors & Embedded systems developments. I have experience practical and theoretical in implementation different PCB designs I do design controller, analysis closed loop stability, signal and systems, signal processing, heuristic optimization, fuzzy logic, neural network and machine/deep learning fields works If you hire me, I can start to work for your job immediately. Please open message box for me so we can discuss the details Thanks

Proposal for Trill ESP32 shield: I'm Shehryar and I have 7+ years of experience in electrical engineering. I specialize in electronics engineering, product engineering, microcontrollers/FPGsAs/DSPs and solar design. I have worked on a wide range of projects such as power electronics, microcontrollers/FPGsAs/DSPs, electronic circuit designs and sensor designing and actuation. I've worked on many arduino projects and more. My expertise includes altering open source PCB designs for arduino boards to be shields for ESP32. This would be a great opportunity for you to use my skills in altering this design for the ESP32. If you're interested in making some design changes for the open source project 'trill bar' then please don't hesitate to reach out. I look forward to hearing from you soon!

I earned my Electronics Engineering degree from India's top university, National Institute of Technology. Underwater sonar, unmanned aerial vehicles, autonomous underwater vehicles, remote operated vehicles, intelligent ground vehicles, and other robotics applications are all areas in which I have prior experience designing and manufacturing printed circuit boards (PCB). Recently, I helped with the electronic flight controller for rocket stabilization. I have worked for major hardware companies for five years and for robotics startups for two. A variety of microcontrollers, including Atmel, Arm, STM, ESP, and Teensy, are familiar to me. Xilinx Field Programmable Gate Arrays are another area of expertise of mine. I have extensive knowledge of C/C++, Python, and Verilog for embedded systems development.

I have 4 years experience in schematic and pcb designing. I have done several projects related to embedded systems and IoT. I will complete the work as soon as possible.

Hello isaactaylor2, I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Alter open source PCB design for arduino plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

My plan for altering the open source PCB design for Arduino involves several key steps. First, I will work closely with you to understand your specific requirements and goals for the project. Based on this information, I will then modify the existing design to meet your needs and incorporate any necessary changes or improvements. The PCB design will be optimized for performance and reliability, and will be thoroughly tested to ensure that it meets your requirements. I will ensure that the design is compatible with the Arduino platform and that all necessary components are included. Throughout the development process, I will communicate regularly with you to ensure that the project is progressing smoothly and that any issues or concerns are addressed promptly. I will also provide regular updates and milestones so that you can track the progress of the project. Once the altered PCB design is complete, I will provide training and support to ensure that you are able to use it effectively and make any necessary updates or changes. I will also ensure that the design files are provided in the appropriate format and are ready for manufacturing.

Hello there! My name is Rafael, and I am an electronics and electrical engineer/mechanical engineer/structure engineer with 10+ years of experience in product design, development, prototyping, manufacturing and architectural design. I have worked on various tools, gadgets, accessories and consumer products design for smaller and larger clients/companies. I understand you are looking for an expert in 2D & 3D Design and a Mechanical Engineer to make some design changes for the open source project Trill Bar. Specifically looking to remove the onboard microprocessor and convert the trill bar to be a shield for an ESP32. I believe that I am the perfect person for this job because of my extensive experience in electronics & electrical engineering/mechanical engineering/structural engineering/product design. My skillset includes Arduino, Electrical Engineering, Electronics, Microcontroller PCB Layout which will be necessary to complete this job. I would be more than happy to discuss the feasibility of your idea and the best way to make it happen with you. Please feel free to contact me if you have any questions or would like more information about me or my services.

I am a highly skilled and experienced PCB designer with a solid track record of 4 years in the field. I am excited to offer my expertise for your project, and I am confident that I can deliver top-quality PCB designs that meet your requirements and exceed your expectations. With my extensive experience in PCB design, I am well-versed in schematic design, layout design, component selection, signal integrity analysis, and DFM considerations. I am proficient in using industry-standard PCB design software is a KiCad. I have designed a wide range of PCBs, including single-sided, double-sided, and multilayer boards, for various applications such as consumer electronics, IoT devices, automotive, medical, and more. My keen attention to detail, technical expertise, and problem-solving skills allow me to create optimized PCB layouts that ensure efficient signal integrity, thermal management, and manufacturability. I am experienced in designing PCBs with high-speed and high-frequency requirements, as well as integrating different types of components and communication modules into PCB designs. I am confident in my ability to deliver exceptional PCB designs that meet your project requirements. I am dedicated, reliable, and always strive for excellence in my work. I am excited to collaborate with you and bring your PCB design project to life. Thank you for considering my bid. I look forward to the opportunity to work with you and provide top-notch PCB design solutions.