Rras jobs

I have a server which is running Server 2019 Standard. Its connected to a Cisco RV130w router. I have setup RRAS and setup L2TP VPN. Ports 1701, 1723, 500 and 4500 (UDP/TCP) have been forwarded to the Server Ethernet 2 dedicated for VPN and which has static IP. When I test from Win 10 client it says verifying and then comes up with error - see attached image. I also tried the PPTP server option in router. My router is set to issue DHCP with IP as router's IP. The Cisco PPTP sever wont allow me to set PPTP server with same subnet as above. So it wont allow me to use as PPTP server IP but allows or any other IP besides anything in If the PPTP server is configured as then the VPN connects and is issued IP

I want to setup a test env utilizing Microsoft Always On VPN on Windows 2019 servers. Time is critical/immediate need. Someone who had done multiple env, especially utilizing Microsoft RRAS/VPN, NPS/NPA using Ikev2/certificates. Client will be using Windows 10 Pro VPN client.

Setup a NPS server, 2x RRAS server, configure connection on PowerShell for windows 10 devices. Half the confirmation has been done but it needs looking over and completing

I have an office branch with a Cisco ASA 5508-X and 3 internal networks: (the RRAS server is ) I have deployed a VPN L2TP (which gives address) with Windows Server 2012 R2 and RRAS so home users can access office branch resources, so far it's working as expected, users can access shared folders, internal Exchange email, printers but they can only do PING and RDP to computers on the network. I added 2 NICs to the RRAS (1 for network and 1 for network) and now users CAN PING resources on those networks but RDP to PC's on those networks still fails. I have deployed the followings GPOs on all networks (image) with no effect: Windows Defender Firewall: Allow

IM using pptp, with nat, for my clients can access all the files and surfing internet trought vpn, but now the connection has made, but i cant do any this thinks!!, need to solved for used inclusive in android systems

i have a Windows server 2016 installed in a Dell Machine. i Just use vpn with PPTP, but i need to change the security for L2TP... because is better for other devices clients like Ios and Android. i have tried many tutorials on internet, but doenst work at all... appearr some many errors, but the more usually is 789... i have tried: - put the server on DMZ - open port 1701, 500, 4500 udp/TCP - turn off the firewall of router and server, try create a internal vpn and nothing Works for me!!! my router : mitrastar GPT-2541GNAC-N1 i dont have other router and dont change that. please Just bid If have the solution, i dont realise the money If you cant solved this. REMEMBER: - IF HAVE THE SOLUTION THE CLIENTS NEEDS CONTINUE WITH INTERNET ACCESS, PING THE SERVER AND ACCESS FILES BY SMB PROTO...

I have 2 virtual machines on 2 seperate networks. 1 network is exchange server the other is a DC. I need someone to configure rras so i can send emails from powershell (dc1) to the exchange a description for the project. Also need to confiure conditional forwarders in dns Now that we have installed our Exchange we will test whether we can receive inbuilt mails. Since we have not registered our domain on the internet (is indeed a '* .cl') we will do this from our domain we will have to set up an environment for this. Make sure your new Exchange can communicate with the DC1 (at network level). Supplies - Knowledge RRAS (use of intermediate network) - Knowledge DNS (cond. Forwarders) - Install smtp relay in your domain (see walktrough) The powershell script

We have a corporate VPN (SSTP) that is currently working and routing to all the IP addresses that are local to the Windows Server 2012 R2 RRAS server (). It will also route to other networks we utilize in various locations including , , etc. We need to allow all traffic from clients on the VPN to allow connectivity to a different subnet of We can ping 192.168.0.x from the IP of the RRAS server. Pinging 192.168.0.x from a client connected via the VPN client will fail. A tracert from the computer connected via the VPN client results in the traffic trying to go out the public IP of the VPN connected client instead of the traffic traversing the VPN. All work will need to be done via a screen share at scheduled times in the 6:00 AM CST to

Two Windows VPN Servers not accepting L2TP Requests Servers use native RRAS with PSK

I need to get L2TP and PPTP working through an ASA5505 to Windows server 2008r2 server - I already have the WAN ip - and ports forwarded and RRAS enabled.. just not working. I dont have time to troubleshoot, just need it fixed

Microsoft Windows Small Business Server 2011 already running PPTP fine. I want to add L2TP support on my RRAS. User will authenticate with domain account. I provide remote access with TEAMVIEWER. Please bid ONLY if you already did it in the past and know exactly what you are doing. Thank you

Microsoft Windows Small Business Server 2011 already running PPTP fine. I want to add L2TP support on my RRAS. User will authenticate with domain account. I provide remote access with TEAMVIEWER.

One of my VPN servers has a small configuration issue. Today users are reporting no internet access after connecting. I compared servers and in RRAS on the non-functioning server there seems to be a NAT issue - need someone to fix this right now.

I have 3 Windows 2008 Servers, each running RRAS / VPN to allow expatriates to watch British TV online. One is fine, but two others are creating problems as follows: - One server allows users to login with PPTP and L2TP, but they lose connectivity after connecting to the server - One server is now returning Error 809 for L2TP users Both issues happened without any apparent reason (no changes on our side) and our server hosts are painfully slow with technical support and reluctant to do anything related to configuration ... so I would really like this sorted quickly. I think it's a small job, and the issue is either a configuration tweak in NPS or RRAS, or, at most, reconfiguring RRAS. Note, servers have just one NIC, so it's the 'custom configuration...

L2TP tunneling need to setup with one sode Cisco FW / router and other side Windows server. Our team tried but some how they are getting stuck at • IPSEC tunneling and failed to connect in phase 2 section due to multiple routing issue at our end. • IP SEC between 2 RRAS server • Demand dial routing between RRAS servers. windows server side end interface is connecting with on permise Cisco n/w and but their end seems not working due n/w connection issue.

Para el equipo Backends Plataformas Filiales, se requiere un técnico con altos conocimiento...Information Services (IIS) 7.5 o superior Librerías Internas de Certificados (CERTLIB) Gestión de Peticiones, Incidencias y Cambios sobre metodologías se valorará conocimientos ITIL Ejecución de Pruebas Unitarias. Experiencia en Soporte de Sistemas Windows 2008 R2 y Windows 2012 R2 (Parcheados, BackUps, Políticas de Seguridad, etc.). Conocimientos de MS PKI Conocimientos de VPN sobre tecnologías MS (RRAS, DirectAccess) Conocimientos de MS Lync Lugar de trabajo: Barcelona Programador, Analista-Programador, ASP.NET MVC, C#, HTML, JavaScript, Ajax, .NET, JQuery, IDE (Entorno de Desarrollo Integrado), Visual Studio, Entity Framework, SQL S...

I have an Azure Virtual Machine, and I need a VPN connection setup for a Windows 8 client to access file shares on the VM. The VM was not originally created within an Azure Virtual Network. I need either RRAS working on the VM or else a configuration setup with Azure Virtual Network. I have tried to set up RRAS with SSTP, but, ran into a roadblock with certificate trusts. Once one Windows 8 client has been set up, I need to be instructed on how to setup other clients n the future.

I need you to setup QoS on my network. I use Win Server 2008 and RRAS on the network and network users use the server as the network gateway to access the Internet. Some users or applications are using up too much bandwidth and I need to prioritize the network usage based on their importance. For example, VoIP traffic must have the highest priority whereas the Internet Web Browsing traffic must have the lowest priority etc.. This is not a very complicated project and budget is very limited to two digit numbers. Thanks

As described in the attached image, i got to set up a lan to achieve the following results: -win server 2008 must share internet connection to clients via cable and via wifi trough the access point configured as radius client -all clients' connections must be tracked in a log file accessible trough the win server machine -all clients must login as different users to the win server machine, before they can access to internet -we need guest users as well, and their connections must be tracked too

I have smartphone clients which are connected to my VPN server. My vpn server is a windows server 2008 implemented az VPN server using RRAS. Another Windows server 2008 beside the first one, is connected to a vpn server outside the whole network. The network is behind a firewall which prevents normal VPN protocols such as PPTP and L2TP. The second server is connected to a vpn tunnel server outside the firewalled network through a virtual network interface. I need 2 windows servers be configured to route smartphone clients' traffic from first server to second server and then through the virtual network interface to the vpn server outside the whole network. A picture is attached. Smartphone connects to server 1 using regular vpn protocols. Server 1 routes traffic to server 2...

I have smartphone clients which are connected to my VPN server. My vpn server is a windows server 2008 implemented az VPN server using RRAS. Another Windows server 2008 beside the first one, is connected to a vpn server outside the whole network. The network is behind a firewall which prevents normal VPN protocols such as PPTP and L2TP. The second server is connected to a vpn tunnel server outside the firewalled network through a virtual network interface. I need 2 windows servers be configured to route smartphone clients' traffic from first server to second server and then through the virtual network interface to the vpn server outside the whole network. A picture is attached. Smartphone connects to server 1 using regular vpn protocols. Server 1 routes traffic to server 2...

A IKEv2 VPN Server is required. We need a windows server 2008 R2 configured with RRAS to let users connect to the server using BlackBerry and Windows Phone 8.1 devices. The main purpose is to let users bypass content filtering firewalls using their windows phone or blackberry smart phones.

A IKEv2 VPN Server is required. We need a windows server 2008 R2 configured with RRAS to let users connect to the server using BlackBerry and Windows Phone 8.1 devices. The main purpose is to let users bypass content filtering firewalls using their windows phone or blackberry smart phones. RRAS is needed to be configured to work with RADIUS.

...VMware vSphere ESXi4.1/View 4.1 and SRM 4.5 • Extensive experience in Windows 2008/2003/2000/NT4.0 Servers at single or multi domain platforms. • pro-active System/Network Administrator with an excellent 'can-do' attitude. Expert in Windows Server System Administration skills. • Experience in Active Directory, GPOs, DNS, DHCP, File & Print Server, IIS (Web Server), FTP, Terminal Server, RIS, RRAS, NAT, WSUS, Microsoft Clustering, Exchange Mail Server and ISA Server • Experience in installing, configuring, administering, and performance tuning Microsoft SQL Server 2000/2005 familiar with Database Creation, Database Security, Database Replication/ Migration, Database Performance Monitoring, User Management, Database Backup/Restoration, Import/...

We have a Windows Server 2003 r2 box setup. It's our webserver running apache. We have 2 NICS (1 WAN, 1 LAN) on diff subnets. Everything was working fine until last week when we had a SSL installed. Now we get intermittent disconnect from the WAN card. RRAS is setup properly and it's been running properly for quite awhile, we have looked at everything. currently, we remote in and disable the wan then enable the wan and this resets the IP. sometimes it lasts for 30 minutes, sometimes for 6 hours. very strange. Need this done asap. Thanks!

We have a Windows Server 2003 r2 box setup. It's our webserver running apache. We have 2 NICS (1 WAN, 1 LAN) on diff subnets. Everything was working fine until last week when we had a SSL installed. Now we get intermittent disconnect from the WAN card. RRAS is setup properly and it's been running properly for quite awhile, we have looked at everything. currently, we remote in and disable the wan then enable the wan and this resets the IP. sometimes it lasts for 30 minutes, sometimes for 6 hours. very strange. Need this done asap. Thanks!

We have a Windows Server 2003 r2 box setup. It's our webserver running apache. We have 2 NICS (1 WAN, 1 LAN) on diff subnets. Everything was working fine until last week when we had a SSL installed. Now we get intermittent disconnect from the WAN card. RRAS is setup properly and it's been running properly for quite awhile, we have looked at everything. currently, we remote in and disable the wan then enable the wan and this resets the IP. sometimes it lasts for 30 minutes, sometimes for 6 hours. very strange. Need this done asap. Thanks!

This is a private invitation for akmal181 Akmal Muhammad, Akmal handles a lot of our network jobs. RRAS is need to clean up.

I have a Windows 2008 server with VPN/NAT (from RRAS) configured to route all client traffic (e.g. like a proxy does). The server has n public IPs, let`s say IPa, IPb, IPc etc. When a VPN client connects to either one of the server IP addresses, the traffic is normally routed (NAT-ed) with the main server IP (let`s say IPa). I want a setup (done with RRAS, not 3rd party app) so that when client connects (VPNs) to IPb traffic will be routed with IPb, when client connect to IPc traffic will be routed with IPc and so on. This setup has to work with a single NIC.

Hi I have 2 server in windows 2012, each one have a hyper-v they are connected by crossover cable, I need someone with experience who can connect the 2 networks creating routes or RRAS or some other easier way. Actually the 2 networks can connect but they use 2 Virtual cards on each computer so that is not the easiest way because represent lots of work if we will have many computers. this job can be done for someone with experience in 1 hour, but if you are good I will need more support in the future projects. Thank you

I have a Windows 2008 server with VPN/NAT (from RRAS) configured to route all client traffic (e.g. like a proxy does). The server has n public IPs, let`s say IPa, IPb, IPc etc. When a VPN client connects to either one of the server IP addresses, the traffic is routed (NAT-ed) with the main server IP (let`s say IPa). I want a setup (done with RRAS, not 3rd party app) so that when client connects (VPNs) to IPb traffic will be routed with IPb, when client connect to IPc traffic will be routed with IPc etc.

I am looking for someone who can setup a RRAS VPN on a Windows 2008 R2 Server with the following specification: 1) We have one public IP and 60 other public IPs for the remote VPN users (all on the same subnet) 2) Users need to dial in and be given one of the static public IP addresses 3) Users will then be able to browse the Internet using their new public IP The system will be a PPTP VPN for now, but other VPN protocols and Radius authentication will be added later. For now we just need this to work. I have setup 90% of this so far but I am having issues with the static route and not sure if I need NAT. Thank you

Would need help in setting RSA VPN on a Windows 2008 R2 server. The Server has two NICs, one is connected to the public Internet (NAT thru a firewall) and the other NIC is connected to the LAN. Required to build RRSA VPN on the Server. Users should be able to connect to the VPN from anywhere, using their Windows AD credentials. Once connected to VPN, LAN resources should be made available for access. I will provide you with RAD access to the server. You need to document (take screenshots, etc) each step taken to make it work.

Configure a Windows 2008 Server to receive VPN connections from Cisco IPSec VPN clients. Full steps must be documented. Please mention in your bid if you will do this with built=in RRAS components or will install any 3rd party software. Also please mention any similar work you have done.

I am looking for somebody very familiar with Windows 2008 RRAS (VPN, NAT, routing etc.). I have a working setup that has the main purpose of routing client traffic (similar to a proxy). I need some consulting on how to improve connection reliability for VPN clients (sometimes the VPN does not disconnect but stops routing traffic) and on how to improve the connection speed (this has to be measurable with ). Please do not bid unless you have used this exact setup before (so at least PPTP VPN with traffic routing enabled on a Windows 2008 box) and have some experience in this regard. Will only pay for working and measurable solution(s).

Have 3 Cisco Aeronets and 1 Cisco 880 series router. Have network diagrams and requirements just need someone to convert them into cisco configs. Setup includes: QOS IPv6 NAT VLAN routing Microsoft RRAS Framed Routes Wifi-Vlans Firewall I am looking for offers at this stage. ## Deliverables requirements notice: As originally posted, this project does not have complete details. Should a dispute arise and this project go into arbitration "as is", the contract's vagueness might cause it to be interpreted against you, even though you were acting in good-faith. So for your protection, if you are interested in this project, please work-out and document the requirements onsite.

I need you to install SQL Server 2008 on my Windows SBS 2011 Essentials Business Server. I have tried installing the SQL Server before but the setup did not complete because I accidentally rebootet the server. Now the setup wont work properly. I have attached the log file and screenshots. The second thing I need you to do is install RRAS and configure it so I can log into my server with a VPN connection. The router is configured and RRAS is installed, I get the error 812 on the client computer. You will work remotely connected via Teamviewer on my computer. Attention: The Server and client computers have German language installed, I am not sure if the language can be changed. If you speak German this would be beneficial.

there are to many subcategories of apps to list on this post. 2 plus year of experience fixing the same problems basic problems and migrations. English phone communication is a must. we are putting a team together. Thanks -Nicholas keywords: right? Server 2008 & Services: RRAS, DNS, DHCP, RDP Astaro & Cisco Firewalls Veeam Backup & BackupExec VMWare Technologies: vSphere console management, vCenter, VMWare Desktop SQL & MySQL (Installation & Backup/Restore) NAS Systems Postini Spam Filtering IIS & SMTP (Installation & configuration) Google Docs, OpenOffice, & MS Office. Computer hardware/software repair: Virus Removal, Desktop Troubleshooting. Sonicwall Firewall Managment & Configurations. Netgear/Linksys Wireless Routers. Netw...

...in the SDK of Win2008r2. ms-sql will have a table with at least 2 fields as described: login,password. Quote if you can add more fields. NPS(ws2008) like IAS (ws2003) will authenticate NPS (like RRAS) users with MSSQL every minute, so if the user login is no longer in MSSQL, the authentication will fail and NPS will stop the connection automaticlly. Quote if possible to update bytes transferred-in-out- / if user is still in mssql he can continue with his internet session on NPS if the user ,(check every minute) is not in ms-sql means the NPS (rras) must end the session in NPS-RRAS IMPORTANT- NPS will communicate to MSSQL using ODBC if possible, or suggest alternative protocol. see also:

...in the SDK of Win2008r2. ms-sql will have a table with at least 2 fields as described: login,password. Quote if you can add more fields. NPS(ws2008) like IAS (ws2003) will authenticate NPS (like RRAS) users with MSSQL every minute, so if the user login is no longer in MSSQL, the authentication will fail and NPS will stop the connection automaticlly. Quote if possible to update bytes transferred-in-out- / if user is still in mssql he can continue with his internet session on NPS if the user ,(check every minute) is not in ms-sql means the NPS (rras) must end the session in NPS-RRAS IMPORTANT- NPS will communicate to MSSQL using ODBC if possible, or suggest alternative protocol. see also:

I am looking for somebody very familiar with OpenVPN and Windows 2008 RRAS (VPN, NAT, routing etc.). I need to setup Windows 2008 as a VPN server that will route all client server needs to support PPTP (via RRAS) and OpenVPN. I want these protocols to work in the same time on the server, with no conflicts between them. You have to prove the working setup on your own environment (so build a Win2008 VM). Will only pay for 100% working solution. Please do not bid unless you have done this exact setup before (so at least PPTP and OpenVPN with traffic routing on the same Windows 2008 box).

Hello, We have a VPS Server that we have install RRAS on it. It's a Windows 2008 R2 Enterprise. We have been looking to limit VPN users to one session per user but we couldn't find it. Then I came across a solution called RRAS Administration DLLs but i couldn't make it work on the server. I want you to send me your solution if you can accomplish this

I need a WINDOWS system admin to help me figure out this problem. I have a windows 2008 host, which has a windows 2003 VM running using VMware Server. In order to have the VM access the internet, it has to be setup with the hosts requirements: <> If its not, its against their acceptable use policy and I wont be able to use their services. I set this up, and the VM can now access the internet, however, only port 80 seems to be getting through. I can't telnet from the VM to another server on the internet (eg: telnet 26) 26 is the port that is open (not 25) and it says "Could not open connection to the host on port 26", however from the HOST this works fine, just not from the VM. Need some assistance with this. You will be provided VNC access. ...

Help setup the following: 1) Setup DHCP and pull proper DNS servers from VPS provider. 2) Help Setup with NAT 3) Help Assiign 5 differnt Public IP to 5 Login Accounts 4) Make sure default gateway is set properly and routing table so VPN clients access internet with public IP for this box not their own IP address 5) Write small tutorial to guide us through this process including how to setup VPN when only one NIC (paralells network adaptor) is provided on the box. 6) Troubleshoot to make sure it works on our VPS box

I am looking for someone who has in depth knowledge of both C++ and C# to write a C# library around the Windows Filtering Platform APIs. I currently have a C# library to access the RRAS Packet Filtering APIs which needs to be verified for any potential memory leaks or marshalling errors. This new library must be able to detect which operating system is currently running and call the appropriate Windows APIs (RRAS or WFP) as necessary. ## Deliverables The RRAS Packet Filtering APIs which are used by Windows Server 2003, Windows XP and prior can be found here: <(v=VS.85).aspx>. The Windows Filtering Platform APIs which are used by Windows Server 2008, Windows Vista and later can be found here: <(v=VS

I am looking for someone who has in depth knowledge of both C++ and C# to write a C# library around the Windows Filtering Platform APIs. I currently have a C# library to access the RRAS Packet Filtering APIs which needs to be verified for any potential memory leaks or marshalling errors. This new library must be able to detect which operating system is currently running and call the appropriate Windows APIs (RRAS or WFP) as necessary. ## Deliverables The RRAS Packet Filtering APIs which are used by Windows Server 2003, Windows XP and prior can be found here: <(v=VS.85).aspx>. The Windows Filtering Platform APIs which are used by Windows Server 2008, Windows Vista and later can be found here: <(v=VS

I am looking for a custom vpn client application that can connect via SSL to a Windows 2008 server running RRAS over SSTP. The client must be light-weight, and its connection settings easily customizable(via config file perhaps?). I would also like it to be able to authenticate via active directory credentials, and/or self-signed certificates. The connection MUST take place over 443 and able to run on ALL versions of windows 32 & 64-Bit. Please send all proposals.

Hi, I'm after an experien...that can assist me completing a scope document/Deliverables for a work placement project. Currently i'm doing a workplacement that equals 196 hours. Project Management is carried out Thuresday's and fridays ( 8 hours a day Project Start Date: 23/2/10 Finish Date: 11/6/10 The project has the following objective 1) Install Wireless Network 2)Configure and install [Routing and Remote Access (*RRAS*)][1] 3) Conduct user training Pleasee see the attached requirements and template for scope document ## Deliverables I have attached the project detailed plan template 1) Complete Project Detailed Plan 2) Performance Report 1 3) Performance Report 2 4)Closure Documentations I will work closely with you and be able to ...

...upon the C++ and C# portions of the code base) -- rewriting to be more robust, and adding the ability to connect to the server using specified credentials; and adding the ability to take advantage of asynchronous notifications for when users log onto and off of RRAS servers, so we can monitor for changes in the status without having to constantly query for the list of logged on users. The tesing application should support a new "listen" command that sits and waits for events to come in, and show what user has logged on or off from RRAS; and a new variation of "connect" where we specify the username and password as well, e.g., "connect servername adminuser password" that controls communication. A couple of other features I thought abo...

A command line utility written in C# to list VPN users currently connected on a given RRAS server (-s flag), or on all RRAS servers in a given domain (-do flag), using current user credentials by default, or using specified username (-au flag) and specified password (-ap flag) . The information should be in tab delimited format. Example: C:> listrras -s myrrasserver server? ? ? ? username? ? ? ? ipaddress myrasserver? ? ? ? vpn_test? ? ? ? myrasserver? ? ? ? vpn_test2? ? ? ? C:> listrras -do -au administrator -ap adminpassword server? ? ? ? username? ? ? ? ipaddress myrasserver? ? ? ? vpn_test? ? ? ? myrasserver? ? ? ? vpn_test2? ? ? ? myrasserver2? ? ? ? vpn_test3? ? ? ? It appears