Kinetis kl25 bootloader jobs

Need to develop bootloader code using stm32cubeIDE which shall support reprogramming the application area in the MCU over UART ports. STM32G070 can be invoked to BOOT mode by Master controller. Project deliverable shall be as follows: 1. Source code of the bootloader SW. 2. stm32cubeIDE project containing source code, linker file and other required codes. 3. Project template for user application area where user can put his code and test the bootloader SW.

yup, that's it. I have a working temporary root with mtk-su and my bootloader is unlocked, I need to keep the root permissions after restart.

Responsibilities • Design and implement software on embedded devices for core product (Embedded C, Freescale Codewarrior Toolchain, Kinetis ARM Cortex M0+ Architecture) • Develop software tools to test and maintain product (Python, C#) • Maintain traceable version control (Git/SVN) • Produce Documentation to support 3rd party code reviews • Provide support in data processing for testing (R, Python, MATLAB) • Create deployment packages for Windows based targets for Test and Configuration software. • Applicant must be prepared to be flexible with languages. Future developments may include IoT and AUTOSAR Requirements • BS Degree in Computer Science/Engineering, Mechatronics or Electronic Engineering. • Experience in hands-on development and...

Job Description : Basic Requirements : Bootloader & Linux Kernel Configure and Build.

Stm32 Gui and bootloader also support for LEDs and MAX on stm32f103vet6

1) Small board 2.3inch x 1.0inch 2) 24VDC Input , Power status LED, Reverse Polarity Protection 3) ATMEGA64M1-15AD CPU 4) RS485 Driver, activity LED 5) CAN Driver/Trans-receiver , activity LED 6) A bootloader/programming connector JTAG etc based on any reference design

I have Ubuntu 18.04 already installed on my external HDD and I want to install GRUB bootloader to it so I can boot it from every PC that have UEFI supported. Now I can boot only from PC that have grub installed

I have an ATMega32M1 chip already integrated into a hardware design that I require code written for. The device basically takes the voltages on each of the input pins and broadcasts that voltage value via CANbus, while also setting the status of its output pins based on a CANbus pack...requirements. Sample the Analog Inputs at a high frequency. Switch the outputs at a high frequency based on the incoming CAN packet. Transmit the values and pin statuses via CAN packets at a specific frequency. Be easily editable so I can customize the CAN frames and I/O configuration. I do not require a bootloader at this point, I will write directly to the chip as the device does not need to be field programmable. However, this may change in the future so there may be scope for a bootloader ...

We need a modified opriboot bootloader (source file ()) that can be compiled and uploaded to the corresonding ICs giving the ability of a key that will be locked with the main program and one external memory. For more information the bootloader has to contain a key that will be confirmed in the main program and the bootloader has to contain a parameter according the unique ID () .

A bootloader that must be loaded to a vehicle PCM running a MPC5XX so that the flash chip can be updated. The bootloader is loaded into RAM and then executed. Bootloader must be able to read/write CAN bus frames, read/write external flashchip and must be able to follow CAN message flow control specs when receiving and send large CAN frames. Candidate must be fluent in Power PC Assembly to design the bootloader from scratch which must be compiled to a binary file which can be executed from RAM.

Add a "Volume up" command in Fastboot library to unlock OEM Android 5.1. My device Volume Up button is not working, so want to send command from the keyboard while in bootloader fastboot screen mode.

The Caterina open source bootloader will currently upload an Arduino sketch binary over the USB serial port. I need the bootloader modified to also allow the sketch binary uploaded over the hardware serial port Serial1, utilizing the same AVR109 protocol that is used over the USB serial port. The target device is the AprilBrother (now Aprilbeacon) Cactus WHID. It uses this version of the bootloader - - I will mail one Cactus WHID to the chosen candidate. Deliverables will include a zip or tar of everything necessary to create a git fork of the above project, sample binary, compile instructions and comply with same license. Let me know if any further information is desired. Modified device should exhibit and

1. INTRODUCTION The purpose of this document is to define the requirements for a firmware development of the live update system of our Advanced Control units. 2. PCB UNIT FW DEVELOPMENT Create a “pre-built” .hex file that allows to load Bootloader fw and application fw at the same time, using the “pickit” programmer tool 3. TFT CONTROLLER FW DEVELOPMENT New features to be added for “LIVE UPDATE MENU”: • when user inserts USB pendrive, must be detected and, if directory and upgrade files exists, automatically prompt the confirmation screen for upgrade process: • if all upgrade process finish correctly, then system must reboot automatically, without wait the user confirmation

IMPORTANT: Please make a realistic bid. If you can´t make it within the budget of approx. $70 please don´t place a bid. I have an SAMD21 based MCU (like MK0, Feather, Arduino Zero or even Due). The MCU should work as a USB to Serial converter. The idea is to implement this in the existing bootloader code (based on Atmel Studio). I hope somebody can help me in this case. I think it could be done with simple code or a library. Perfect would be if you have an similar MCU/Arduino (like described) to test. Details will be discussed.

I would like to learn Embedded C programing to Program below following items: 1. Serial Communication 2. MODBUS Protocol 3. Bootloader development 4. Timers initialization for State machine implementations 5. Interrupt Service for Priority interrupting 6. GLCD programming 7. CAN Protocol implementations using Microcontroller. 8. I2C and SPI Protocol.

...phases of firmware project: 1) MASTER MODBUS communication protocol. 2) DCHP MODBUS-RTU 3) BOOTLOADER FOR FIRMWARE UPGRADE 4) AIRTECNICS BASIC CONTROL PROGRAMMER 5) INFRARED REMOTE CONTROL 6) CONTROLLER OPERATION – AIR 7) CONTROLLER OPERATION – WATER 8) CONTROLLER OPERATION – ELECTRICAL PLANNING 1) A Windows application which acts as the Final Controller Firmware should, to be able to control at least 2 kind of remote units. Including address assignment -- beginnig of February ( this implies also that I have to develop a sort of "remote units emulator" to test it at the beginning 2) Actual controller firmware ( with no bootloader and remote upgrading ) -- beginning of March 3) Bootloader controller firmware + Windows upgra...

Please ANSWER ALL of the below questions in your BID offer in order to be considered! Thanks! (But I will hire ANYONE that simply completes the TASK described in the attachment. So do not fear the questions :) ) 1. Are you a Linux Kernel expert experienced with Embedded Linux Systems using U-Boot bootloader? 2. Are you experienced debugging Qemu KVM virtualization with GDB etc? 3. Are you experienced with programming embedded devices and firmware/bios etc in C/C++? Thanks for answering those questions! SEE FILE ATTACHED FOR DETAILS for the DETAILS of the JOB/TASK. (The job/task should be pretty simple/straight forward but takes a couple hours.) When you BID make sure to mention if your BID INCLUDES PART 4"B" or just part "A".

NOTE: SPAM BIDDERS: IF YOU BID and you are NOT qualified and have not READ and understood the requirements you will be reported as spam bidder. Only bid if you have worked with this and you know your stuff and understand the requirement, Please no spam bids, Thx! Looking for someone experienced with embedded systems embedded linux with u-boot to give me correct qemu commandline parameters to successfully boot an image from a PPC board. The contents of the /boot/ directory on the boot-drive dd-image is here for reference: I've tried qemu-system-ppc -M ppce500 -bios /usr/local/.../ -boot c -hda (also tried specifying -kernel /path/on/Host/uImage_for_embbededSystem but didn't work...) NOTE freelancer website breaks the LINK or a semicolon is inserted which should be removed...

The chip 45 boot3 is a very famous bootloader that is mainly used for ATMEL microcontrollers. All information about this tool you can find in the WEB: Both the microcontroller source and the GUI is open source and the Sourcecode is available. Unfortunately the GUI is written in C# and can not be used under linux. Aim of this project is to transfer the C# code into Qt code that is useable on a linux platform. This project is only concerning the GUI that is running on the desktop computer. The microcontroller part is left as it is. Connection to the µC is done over the serial communication and the command protocol. The microcontroller part is not included in this project.

Need to develop application to unlock Xiaomi Mi Bootloader.

...Button Keypad LCD Display Add on Propose working of Bootloader via J1939 CAN bus. Propose Windows Based Bootload software Interface Propose Windows Based LAD/Function block software for the ECU/Keypads/LCD Propose Windows Based Diagnostic software Input output statuses and current draw Input Output manipulation System Self-Test Propose Android Based diagnostic Software via Bluetooth from Keypad Estimate Manufacturing Cost Milestone 2: Schematic and PCB Layout Value: 4000 USD Complete ECU Schematic and PCB Layout **Complete Keypad 8 BTN Schematic and Layout **Complete Keypad 16 BTN Schematic and Layout Complete Keypad 24 BTN Schematic and Layout **Complete Keypad LCD display Schematic and Layout Milestone 3: Firmware (Including Bootloader function) Value: 4000 USD Complet...

Deliverable: Bootloader for embedded device that can download new firmware from a windows PC over a usb cable. Bootloader framework exists, but need someone very smart to modify frmaework and implement full functionality to meet product requirments. Embedded device uses Nordic nrf5x chip, and firware is cross-compiled using GCC C compiler for ARM. One time project, but there could be follow on work, if project is done well.

I am designing a sensor device. I have a problem developing bootloader and application code using stm32cubeIDE. Suggested approach: 1) The application can be copied and modified from IAP example code from ST official website. 2) Download application image to the internal Flash via the UART port 2. 3) Implement the software development on Nucleo-g070 development board 4) Develop the bootloader code and application code in STM32cubeIDE.

I have a Samsung S10+ 5G which is bootloader unlocked and I need to do the following on the phone. 1. Modify Kernel/ROM to grant Root access to us on the phone on ADB 2. Add Magisk Root policies or other root policies for applications to have root access Want the changes to be made on stock firmware and make a flash-able ODIN file.

I have bootloader code and Windows application code to update firmware with UART for dsPIC33F. I need to convert from Windows application code to android app. If you have experience to update firmware with UART for dsPIC33F, please contact me.

Using WSN from BitCloud_MEGARF_3_3_0 we need to transform .c and .h files used for the project into ".a" or ".o" file and link them in order to generate .srec file. This implem...to transform .c and .h files used for the project into ".a" or ".o" file and link them in order to generate .srec file. This implementation should avoid to use Atmel Studio command line to generate .srec file and protect the code trough .a extensions. The goal of this project is to integrate the WSN code into desktop application and program the microcontroler without any external application. Bootloader is implemented and actually .srec file is generated using Comand Line from Atmel. Must have experience with makefile BitCloud_MEGARF_3_3_0 and Atmel Studio. .c &am...

Hi Persuasive, I see in your profile that you have a lot of android experience. Also in the rooting department :) I have a android 6.0.1 running target. It has the security patch from 2018-08-30 ( so no dirtycow) I would like to get temp root. This so i could adjust some files on the data partition. The unit has locked bootloader, and dm-verity on. It is a 32-bit android system. I do not have ADB access on it..but i do have serial port shell access (shell user). I also have a script that can upload files thru this serial port to /data/local/tmp Further i have a older version, with almost the same hardware..that runs 5.1.1. on that one i can get root with dirtycow exploit. This might be handy to peek in the internals. I also have full extracted system and boot partition. Do y...

Please Sign Up or Login to see details.

Please Sign Up or Login to see details.

Develop source code that allows the AtMega64M1 firmware to be reprogrammed via CAN. There are some examples provided in the attachment. I will make available the Atmel studio project baseline code in which the bootloader code is to be added.

I need nRF52840 bootloader firmware. I want to find the developer with experience for nRF52840 DFU.

Atmel SAMD11 bootloader/i2c/serial code required. Our Goal: ATSAMD11D14A-MUT MCU to monitor three channel INA3221AIRGVR and report current/voltage reading back using HID or COM class to host computer , we also have three IRQs setup that will need to act as Flags for other MCUs on this board to activate/deactivate based on macro specific readings of current/voltage.. we also would like to program from host computer connection using only USB cable the three MCUs individually that are connected on the i2C

...Controller Module for PWM Control with Arduino,STM, ARM, AVR, Raspberry pi, 1 Channel, 3.3V/5V Logic, AC 50/60hz, 220V/110V B0784T3V5R RobotDyn - STM32F103C8T6 STM32 ARM Cortex-M3 Minimum System Development Board. Black Pill B073CGK5WC RobotDyn - Mega 2560 PRO (Embed) CH340G/ ATmega2560-16AU, Compatible for Arduino Mega 2560 R3 with Bootloader B07MYJ8D4X RobotDyn Nano ETH B072C4CDXM RobotDyn - Mega 2560 PRO Mini, ATmega2560-16AU, Compatible for Arduino Mega 2560 R3 with Bootloader B0787C224K RobotDyn Microphone Sound (Voice) Detector Module - Sensor, with Digital and Analog Our - for Arduino, STM, Raspberry DIY Projects B07XB7S62S RobotDyn - Mega Protoshield Prototype Shield with Mini breadboard, for Arduino Mega 2560 B07L349FRM RobotDyn - Mega ETH with PoE - Mega 2560 Eth...

...GCC for ARM compiler) - connects, via USB, to a STM32F407 uC (STM32F4 Discovery board), after a match with it's 96-bit unique IDE - if match, download the generated file into the target - if connected, read live variable values inside the winForm application, based on a predefined list of variables used in the Cube project - MCU Bootloader, that enables USB OTG communication with the C# App Deliverables: - fully documented C# app source code - MCU bootloader - C# msi installation kit (special mention: the installer should automatically install & configure the compiler and any other prerequisites for this application) - the app Form should contain the following: - a browse button for the CubeIDE project - a text field to fill in the 96-bit unique id for ...

We need a custom CAN Kernel / Bootloader for a TI C2000 MCU.

I want to update Application firmware on PIC16F19197 using BLE (Which is connected via UART). Project includes 1> Bootloader for PIC16F19197. 2> Saving of Golden copy to FRAM (Drivers has been written. Connected via SPI to PIC) 3> Integrate existing Application code to Bootloader (If needed) 4> Update new Firmware on PIC16F19197

...64Mbit SPI Flash memory • Two RS-485 serial communication channels MODBUS-RTU • 3. PCB FIRMWARE New features to be added: • Bootloader that allows FW of PCB to be upgraded from a TFT Control Unit by RS-485 communication. • Communication drivers for fast and efficient interface communication (up to 115200 bauds). 4. PLANNING & MILESTONES We will supply hardware units of PCB and all necessary tools for developing the new firmware. 4.1) Modify bootloader fw of TFT Control Unit to allow to upgrade remotely till 32 PCB units. Also is necessary to add an option to “clean” SPI configuration and left default values (no PCB units detected). 4.2) Bootloader that allows FW of PCB to be upgraded from a TFT Control Unit by RS-4...

- Add image size and CRC information to compiled binary image - Integrate image size and CRC information into OTA bootloader Existing OTA bootloader utilizes ANT-FS framework

Need to design firmware to build MQTT gateway with following details for STM32 + sim800 + SPI flash memory 2. Gateway need to publish data received on uart of STM32 gate way from mother board 3. Gateway need to subscribe topic and when data recieved send that data to mother board via uart 4. Gateway need to check atleast once/twice a day for new firmware avail...received on uart of STM32 gate way from mother board 3. Gateway need to subscribe topic and when data recieved send that data to mother board via uart 4. Gateway need to check atleast once/twice a day for new firmware available on server. 5. If new file available then ask server to send that .bin or hex file and store it to SPI flash. If correct file received then reprogram mother board SMT32 using bootloader pin and uart.

We need the development of secure bootloader for nRF52840. The hardware architecture needs to prevent threats like side-channel analysis, supply chain attacks etc. It should have provision for secure OTA firmware verification and upgrade.

Take file from SD, with ID, and update firmware on reset. Use previous development for the PIC24 and port to PIC32. Also, must implement web upload to write file to SD. Must use MPLAB+Harmony v3

We need the ability to plug our device into the computer, pass a BIN file to the device(mass storage device) to update FW. We also need assistance configuring SSD1306 to work inside atmel studio. We'd also like to read a text file from the SAMD21 that was uploaded from the computer(mass storage device). We'd prefer prior experience and don't want to pay for you to learn every bit of what we are requesting.

We have developed a Sigfox circuit board using the SAMD21 and a sigfox module. Although this is a standalone board we are using the Arduino bootloader (the Arduino M0 using the SAMD21 chip) as some of our libraries were previously developed for the ATMEGA328 and we want to reuse those. We would like to get the power consumption down very low (the application note says that with the RTC we should get 10uA in sleep) so we can run off battery. Currently, this is higher and is because of the way the arduino boot loader initialises some of the registers. We have made some clock and peripheral adjustments but are not getting to the level of power expected. We are looking for someone who has had experience with SAMD21 who can give us a block of code which turns off all the unnecessary c...

Hi Tejas P., I noticed your profile and see that you have experience in the SAMD21. We have developed a Sigfox circuit board using the SAMD21 and a sigfox module. Although this is a standalone board we are using the Arduino bootloader (the Arduino M0 using the SAMD21 chip) as some of our libraries were previously developed for the ATMEGA328 and we want to reuse those. We would like to get the power consumption down very low (the application note says that with the RTC we should get 10uA in sleep) so we can run off battery. Currently, this is higher and is because of the way the arduino boot loader initialises some of the registers. We have made some clock and peripheral adjustments but are not getting to the level of power expected. We are looking for someone who has had experie...

Need to implement Bluetooth and RF propriety bootloaders for wireless project using Nordic nRF52840

I need to implement an OTA DFU bootloader for the MSP432P401R or the STM32L452RE microcontrollers to update firmware remotely, services such as Mongoose or any other cloud or media (USB pen drive, SD card, etc.) can be used

Hello stathisv, we are working on a project with Yocto-project and rauc, we need assistance in order to integrate a script on a bootloader compilation and make it work.

We are looking to design sensor network using RFM69HW. We need the design of sensor node. You are required to design the schematic and PCB using Al...used and confirm with us. 4. It will be powered by CR2032 battery and the battery must last at-least 1 year with a reading every 5 minutes. 5. Range must be atleast 100m indoor. 6. Maximum PCB size is 30x30 mm. If it is smaller it is better. 7. Make sure ATMEGA328-SMD programming port is available for programming and firmware update. 8. The ATMEGA328 might come to us without bootloader, we need a process to upload a bootloader to it. 9. SMD antenna connector must be available as well as a port to solder helical antenna if needed. 10. All resistors and capacitors used must be 0603. 11. The PCB is 2 layers only. 12. A way to measu...

HI, I have a redmi note 4 xoami, The system cyrrently has lineage installed There is already bootloader and TWRP installed. I would like you to either talk me through the install via messages or teamviewer. I would like to install anything from android 7 or newer. Immediate start

hi, developers I am looking a master of nrf52 programming. Need to program bootloader on BLE. 1 . download hex file from cloud 2. OTA programming between nRF52 devices Only bid on experienced freelancer We can discuss more on chat. thanks