Esp8266 ultrasonic sensor arduino jobs

Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where it cam...

...with a draw bridge, a draw bridge to be raised by the 2x electrical motors but a manual way to raise the bridge is essential in cases of motor failure. security cameras to be fitted to the exterior of the property to cover 360 of the property and cover all blind spots, all cameras to have IP68 water resistance and night vision, infra-red, motion detectors, connected be via smart app, and have PR sensor lights attached to external cameras, all internal areas to have cameras with exception to guest bedrooms and toilets. Property to have an outer moat with a width of at least 12 feet and depth of at least 12 feet with circulation pumps so the water does not become stagnant, the base and sides of the moat to be concreted. All doors are to be armoured bulletproof doors with reinforce...

I'm in need of an ESP32 BLE application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific requirements of this project.

I'm looking for an expert to conduct a thorough evaluation of a specific robotic sensor, focusing on accuracy, precision, sensing range, and every other applicable characteristic. The end goal of this evaluation is to identify the sensor's limitations and propose potential improvements. Your main tasks will include: - In-depth research on the sensor's accuracy, precision, and sensing range. - Evaluation and comparison of those aspects with industry standards. - Identification of the sensor's limitations and potential improvements. - Preparing a research paper based on your findings. I expect the evaluation to be presented in a clear and concise PowerPoint presentation. The presentation should effectively communicate the sensor's strengths, limitations, and...

I'm seeking an experienced C# developer proficient in .NET with modbus protocol to integrate a commercial security device within ou...protocol to integrate a commercial security device within our system. You will work on: - Establishing a connection with security device through modbus protocol - Integrating real-time monitoring feature to the system - Handling sensor data in real-time monitoring The ideal freelancer for this project should have a robust background in C# programming, .NET framework and Modbus protocol. Previous experience in device integration for commercial security systems would be a plus. If you have a knack for problem-solving, attention to detail and are comfortable with handling sensor data, you're just who I'm looking for! Let's en...

I'm in need of a skilled Arduino coder to create a custom code for me. My project primarily involves generating variable frequency range FSK sine wave output. Key Requirements: - Develop code specifically for Arduino R4 board + SD card module - Generate sine waves of different frequencies - Different frequencies - 10,000 different frequencies (integers) - eg: txt file (100,200,300,400,500.................n integers) Frequencies list are stored in a SD card CSV or txt format Arduino new R4 boards has built-in DAC for sine wave generation with ready made library as follows: Code for wave generation --->>> analogWave wave(DAC); int freq = 10; // in hertz, change accordingly void setup()...

I'm looking for a skilled an...who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your proposal with relevant examples of your...

I'm seeking an expert in LabView, Arduino programming, and their integration. The aim of the project is to create a system for industrial automation and prototyping that includes: - Real-time data monitoring - Designing a user-friendly interface - Automation and integration of microcontrollers You should ideally hold substantial experience in LabView development and Arduino programming. Your experience should encompass integrating these platforms and implementing the features mentioned above. Knowledge in integrating various sensors into this type of system and achieving real-time data monitoring will be crucial to this project. Any previous work with industrial automation and prototyping will certainly be beneficial.

...comprehensive learning plan intended for various age groups from Kindergarten to college. This curriculum should encompass three main areas: 1. Coding: Should cover various programming languages including Python, Java and foundational learning platforms like Scratch, as well as MIT App Inventor for app development. 2. Robotics: The curriculum should also touch on different robotics platforms - from Arduino, LEGO, VEX, Sphero to Raspberry Pi. 3. Media Arts: In addition, I want to integrate media arts, where students can learn graphic design, animation, videography, and web design and development. Ideal candidates should have extensive experience in pedagogy and skill development in these areas, and be able to create an engaging, age-appropriate curriculum for students acros...

This is an extended version project of previous AMS5915 Pressure Sensor PCB with integration to extra features

...application for both iPhone and Android. The fundamental purpose of this app is to establish a seamless connection with a Bluetooth source (specifically, an esp32 sending sensor and pin status data) and store the received data in a local CSV file on the phone. Key Feature Requirements: - The app should function smoothly on both Android and iPhone platforms. (priority is android for now) - Ability to connect over Bluetooth with an esp32 wroom module. The Bluetooth protocol may be either BLE or classic, as I am not entirely certain which one this module uses. - Once connected, the app should be capable of receiving sensor and pin status data. - The app should store this received data in a local CSV file on the mobile device for later access. - A simple and functional user...

I have an existing Arduino code which requires modification for converting my Bluetooth to BLE compatible for iOS applications. Your responsibility will be to: - Modify the existing Arduino code to make it BLE compatible - AS optional Create an iOS application with a control interface feature. The application should allow users to control and manage a customized smart lock model. Ideal Skills: - Expertise in Arduino code modification - Proven experience in developing BLE compatible software - Proficient in iOS application development, particularly in creating control interfaces - Familiarity with smart lock functionalities would be a bonus. Your services will be reviewed for potential system upgrading needs, hence, I'm interested in individuals who have a pr...

I'm in need of a private LoRa based system that's going to help me monitor and control my pumping systems. ...need the system to specifically monitor the flow rate, switch pumps on/off and also keep an eye on the tank levels. The main goal of this project is to provide me with an understanding of how the system is designed and how the various elements of its architecture come together to facilitate data collection and pumping control. Ideal Skills: - Experience with LoRa based systems - Knowledge of sensor integration and monitoring - Ability to design user-friendly control interfaces - Understanding of pumping systems and their integration with IoT technologies It is important that you're able to provide me with tuition on the system, so that I can operate and m...

I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.

...experienced in working with piezoresistive pressure sensors and interfacing them to consumer electronics. The main aim of this project will be to program the pressure sensor for: - Accurate data collection and processing - Integration with consumer electronics for seamless performance Preferably, you should have: - Proficiency in Embedded C - Experience with piezoresistive pressure sensor interfacing - Good understanding of I2C communication protocol - Prior experience in developing consumer electronics Your role will involve: - Designing and implementing the software for the pressure sensor - Ensuring optimal performance of the sensor in the consumer electronics product - Testing and troubleshooting to ensure the system works effectively If you have th...

I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a co...

I need a C++ programmer who can answer questions about my project Key Project Requirements: - Have prior experience in C++ programming for Arduino UNO - Familiarity with PixyMon camera - Proficiency in implementing line following functionality The project is urgent, and I need someone who can deliver a high-quality code within a short time frame. If you meet the above requirements, and you're confident in your ability to deliver quickly, please reach out.

I am seeking an Arduino programmer to help with a specific project. Key Responsibilities: - Writing code for controlling reed switches - Displaying data from the reed switches on an LCD Ideal Candidate: - Proficient in Arduino programming and sensor control - Experience in working with reed switches - Capable of interfacing with LCD displays This project requires a good understanding of sensor control, as well as being able to implement the desired display output. Understanding of the specific sensor, reed switches, is a plus. Please only bid if you have experience in these areas.

I'm seeking an expert to create a bespoke voltage sensor and WiFi module configuration to monitor low voltage (below 100V). The core purpose of this system is to manage power outage alerts. Key Requirements: - The system should effectively detect power shortages in a low voltage environment. - Upon detection of a power outage, it must immediately send a mobile notification or SMS as an alert. - Expertise in sensor technology and WiFi modules is crucial for this project. - Experience with mobile notification systems is also highly desirable. By integrating your skills in sensor technology, WiFi modules, and mobile alerts, we can build a proactive power outage notification system. I look forward to your innovative solutions and approaches to make this project a s...

Here is a brief description of my project. My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof container and be able to be charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a...

Add opti coupler and necessary resistance in pcb Cuhange the lid of the enclosure for new laser sensor

I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.

...monitor system I've developed using Arduino. This report will be accompanied by a PowerPoint presentation. The report should contain: - **Technical Details:** I have a basic structure in place, but I'm seeking a professional who can fill in any missing technical information. - **Benefits and Applications:** The report should showcase the potential benefits of this system and highlight possible real-world applications. - **Data Analysis and Insights:** It's important to have a detailed data analysis section, with insights drawn from the information collected by the system. I also need the report to include missing details such as: - **Hardware Components Used:** I'd like the freelancer to list all the hardware components like the Arduino Uno, voltage ...

I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a co...

I'm looking for a skilled Arduino programmer who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a button), remo...

I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a...

...up data communication between Arduino devices using Lora technology. Key Project Details: - The project involves simple packet sending between devices, specifically focusing on transmitting GPS coordinates. - You need to be proficient in Lora programming for this project. Previous experience in similar projects is highly desirable. - The sensors that need to be integrated with the Arduino for remote sensing and monitoring include temperature and humidity sensors, soil moisture sensors, as well as motion detectors. Ideal Skills and Experience: - Strong Arduino programming skills. - Proficiency in Lora technology. - Experience with integrating various sensors. - Experience with GPS location data handling. - 1 device is lilygo t-beam v1.2 and the other is Arduino...

I need a professional who can handle our GPS tracking ...professional who can handle our GPS tracking platform (Wialon) and perform data entry on a regular basis. Additionally, I require support for the sensors that we are using. Key Responsibilities: - Perform data entry on our GPS tracking platform (Wialon) - Provide support for the sensors we are using - Update vehicle and sensor information on a regular basis Ideal Candidate: - Prior experience with GPS tracking platforms, particularly Wialon - Strong data entry skills - Proficient in sensor support and management - Ability to work on a weekly update schedule - Detail-oriented and capable of maintaining accurate records I prefer someone who can commit to a long-term collaboration and ensure the smooth operation of our...

Please Sign Up or Login to see details.

I'm looking for a skilled Arduino/PCB designer for my course project which has following features: - Switching ON/OFF power light: I'd like to control this using screentouch. - Temperature measurement: I'd like the device to measure the temperature in a room and display it as a numerical reading on a screen. All the above features should have battery power, just like a smartwatch. The ideal candidate should have experience in Arduino and PCB design, as well as a good understanding of power management and temperature sensing. If you're confident in your abilities and believe you can bring this project to life, please reach out.

I'm in need of an experienced Arduino programmer to make simple amendments to existing functions in my code. This project involves code which interacts with external devices - understanding of these interactions will be crucial. Requirements for this task: - Expertise in Arduino programming and language - Experience with code that interfaces with external devices - Strong attention to detail as subtle changes are required - Ability to ensure system functionality post modification I look forward to your comprehensive responses. Ability to deliver promptly and accurately will be considered for ongoing work.

...game should allow for online multiplayer functionality, so players can compete against each other. - Customizable Characters: The golf game should offer a range of customization options for player avatars, allowing for unique and personalized gaming experiences. This is a physical mini golf putting game where users will putt a ball and depending on where the ball goes it will trigger a sensor and the sensor will be linked to a specific score. There will be 9 or 18 holes and the scoring should be linked for the user from hole to hole. There will be a final leaderboard that will display all scores. Ideal Skills and Experience: - Prior experience in game development, particularly in creating PC games. - Proficiency in applying triggered effect software to games. - Know...

...significant advantage. Deliverables include the final working PCB prototype model. Reliability, accuracy, and attention to detail are crucial for this project. - BOM File has to be provided - CPL & Gerber files has to be provided - NEEDS to be cost-effective for mass production - Any mining algorithm should/could be programmable - Considerable high hashrate is expected - Raspberry Pi 3/4/5, ESP32xxx, Arduino or any other microcontroller can be used The main focus of this project is: - Low cost hardware ( PCB ) - Electrical Efficiency - Mining capabilities - Scalability - Considerable hashing rates expected This project has a budget of 500-750 USD for a running & tested prototype and has to be done ASAP. You have totally freedom of the components you want to use, but r...

...on an LCD screen. The system is based on one or more Arduino boards and addiƟonal components. Design the structure of the system, select components and sketch the structure of the system soŌware. (Based on Arduino Project Handbook by Mark Geddes, 2016) Note: Not all details are specified in the descripƟon. For instance, we don’t know where exactly the system will work, how it will be powered (baƩery or grid), and how oŌen measurements will be taken. Resolving these issues is leŌ to you as the designer of the system. However, remember that each design decision requires a jusƟficaƟon. 3. General idea of the soluƟon: For such a simple system, one Arduino Uno board will be sufficient. To measure both humidity and temperature, the DHT11 sensor can be used, a...

The project aims to develop an IoT sensor-based bazaar light that can be easily fixed onto any product. The light will be activated remotely via a mobile application, allowing users to locate the product in real-time. This solution involves minimal circuitry and compact design for seamless integration onto various items.

...an almost completed power electronics system for bidirectional power exchange of up to 8 kVA across all four quadrants. The system utilizes the IM828-XCC platform, with control achieved via galvanic isolation through the Arduino DUE. Your main tasks involve adding the ADuM1401 Digital Isolator for Arduino connection, connecting the motor and generator functionalities, integrating the iMOTION2go chipset, and creating the PCB design using KiCad. Project Tasks: ADuM1401 Digital Isolator Integration: Add the ADuM1401 Digital Isolator to ensure galvanic isolation for the Arduino DUE connection. Implement necessary connections and ensure compatibility with existing components. Motor and Generator Connection: Ensure seamless functionality of both motor and generator mode...

EC200 : Winbond memory ic integration File system integration, NVS memory integration gyro sensor integration. Sms integration

I need a talented developer to assist in integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus us...integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus using the CAN @ 1mbps - Toolset: I require the project to be developed using the Arduino using Arduino tinymovr library. The ideal candidate for this project will have a background in microcontroller programming, specifically with the ESP32, and demonstrable experience with motor control. Prior experience with the CAN FD protocol and the Arduino framework wi...

I'm looking for an experienced developer who can create a program for an STM32 microcontroller. The program should integrate a sensor for distance measurement and the data should be processed for monitoring purposes. Key Requirements: - Develop a program for an STM32 microcontroller that seamlessly integrates a distance measurement sensor. - The program should be designed to continuously monitor the distance values received from the sensor. - The data collected should be easily accessible for further processing and monitoring. - The program should be efficient and optimized for the STM32 platform. Ideal Skills and Experience: - Proficiency in programming for STM32 microcontrollers. - Experience in integrating sensors to microcontrollers. - Previo...

I am looking for a freelancer who is experienced in embedded code, specifically Arduino. I have a specific project in mind that requires the use of embedded code. Skills and Experience Required: - Proficiency in Arduino programming - Strong knowledge of embedded code development - Experience in working on projects involving Arduino and RS485 Modbus protocol Refer the datasheet attached if needed The purpose of the project is not specified.

I'm in need of an Arduino-based relay switch that can operate multiple circuits serially. The purpose of this project is to start lights in a serial fashion, using physical buttons. Key Requirements: - Build a reliable relay switch: The switch should be able to handle automation for up to 15 relays. - Physical Button Interface: The relay switch must be operable via physical buttons for a user-friendly experience - specially to set adjust time delay between the serial switching Ideal Skills: - Arduino Programming: Experience in programming Arduino to build relay switches. - Circuit Design: Proficiency in designing circuits for handling multiple appliances. - Remote Control Systems: Knowledge in implementing remote control systems for automated appliances. - User ...

I'm looking for a freelancer who is proficient in using the Proteus Design Suite for an intermediate-level simulation project involving an Arduino microcontroller. Key Requirements: - Proficiency with Proteus Design Suite: The ideal candidate should have prior experience in creating and executing simulations using this platform. - Intermediate-Level Microcontroller Simulation: The project involves simulating an Arduino microcontroller which requires a good grasp of microcontroller programming and circuits. - Attention to Detail: The successful freelancer will need to ensure high accuracy in the simulation results. - Timely Delivery: The project has a set timeline, which the freelancer should adhere to strictly.

Hi Philipp, In connection to the CanBus project I am thinking about meassuring the fuel level on demand from 'outside' of the car/truck. Do you have any idea? I was thinking in a ESP8266 + Battery + Ultrasound with a round pcb form to be embedded under the fuel tap...

I'm looking for an IoT engineer to visit for a project in Erbil, Iraq. The main tasks include sensor integration and system design. The project involves the integration of various IoT devices, primarily temperature sensors and motion sensors. Additionally, I'll need assistance with generator monitoring. The temperature sensors will be used for regular room temperature monitoring, spanning a range of -10°C to 50°C with an accuracy of ±0.5°C. The ideal candidate should have: - Proven experience in IoT sensor integration - Strong understanding of system design - Previous experience with temperature and motion sensors - Knowledge of generator monitoring systems Please note that the project location is Erbil, Iraq.

...proficiency in C++, Python, and Java for system control and automation. Experienced in mobile app development using React Native, Swift (iOS), and Kotlin (Android). Skilled in web development with a focus on responsive design and secure payment processing. Deep understanding of backend development, including API services, database design (SQL and NoSQL), and server-side logic. Familiarity with sensor integration and real-time data processing. Experience with automation systems, robotics, or similar technologies is highly desirable. Knowledge of machine learning and optimization algorithms is a plus. Excellent problem-solving abilities and attention to detail. Strong communication skills and the ability to work as part of a team. Bachelor’s degree in Computer Science, Engine...

...use the available space efficiently while adhering to all design rules and ensuring signal integrity. Layers: Design is expected to be a multi-layer PCB to accommodate compactness and routing complexity. Suggest the optimal number of layers for this design based on your professional assessment. Critical Components and Placement: The microcontroller unit (MCU) should be centrally located. EMG sensor inputs should be on one edge of the PCB for easy access. Power management components should be placed close to the power input. Ensure adequate spacing for heat dissipation around power regulators. Routing: Use differential pairs for EMG signal routing to minimize noise. Maintain impedance control for critical signal paths. Route power tracks with sufficient width to handle the cur...

For my recent short book about utilizing Arduino, I need proficient help with enhancing the aesthetics and formatting of the text. The ultimate goal is to turn my raw material into a print-ready layout while ensuring it matches my preference for a modern and clean style. Final format needs to be one that I can easily edit. Style reference: Makezine (make magazine) books or Hackspace magazine. Key tasks for this project: • Develop diverse page layouts to maintain reader engagement. • Incorporate placeholders for pictures to enrich the content visually. • Include placeholders for elements like flow diagrams and illustrations to support the text. Ideal candidate: An ideal candidate for this position will have considerable experience in book layout design, especi...

...steady to indicate system activated. When the control unit is activated and a person passes in front of the sensor in a room, the siren sounds and the violated sector(s) are indicated on the control panel. 3 sector LEDs to indicate a breached room after activation. When violated, it flashes at a frequency of 10 Hz until the alarm is activated until the siren is deactivated. It lights up steadily to indicate the sector violated until the control unit is reset or rearmed. 1 reset button on the control panel. As a result, the violated sector indicator LEDs are turned off. The RFID reader is at the entrance to the residence. If the control unit is deactivated and the tag is passed to the sensor, it activates the system. The alarm is armed after 15 seconds. If the system is act...

...cybersecurity, with a specific focus on sensor network. The aim of this project is to explain the principles, intricacies, vulnerabilities, and mitigation strategies of sensor networks in cybersecurity. However, the twist here is, the information needs to be broken down to a level that non-technical decision-makers can understand. More details about time frame and milestones will be discussed in the chat window. - The freelancer should have: - Deep knowledge and understanding of cybersecurity and sensor networks. - Strong technical writing skills, with proven ability to simplify complex concepts. - Experience in communicating technical ideas to non-technical audience. - The report should include: - An easy-to-understand exploration of sens...

Description: I am seeking a skilled freelancer with experience in electronics, Motor Control through Pulse/Step & Direction, Arduino, and servomotors and their drivers to assist me in implementing the basic control for reliable operation. The primary focus will be on the electronics aspect of the project. The motor in question is a "T6 Series 750W AC Servo Motor" (see link: ) which is intended to be controlled using an Arduino Portenta H7. What I Require: - Development of an appropriate circuit diagram compatible with the motor driver and Arduino. - Selection of the required components. - Configuration settings including pulse widths, pulse formats, etc.