Keyboard firmware jobs
Hi, We need someone who can design electronics for our product. You need to review product details, select sensors according to need and design electronics and PCB for it. We also need same person to do firmware and testing for it. We need reasonable quotes please because we are not new in this field. Further details will be shared with selected freelancers only. Thanks.
Hi, we need someone who can do electronic design and PCB design for us. In addition to this, we also need same guy to do PCB testing and firmware development. Please bid if you are available to work now. Further details will be shared with selected freelancers only. Thanks
I am looking for a freelancer or team that has extensive expertise in RF radar design and SDR receiver design, hardware, and firmware. More details on PM. Thanks
We have a working PCB with unknown firmware, we need to replicate the firmware.
Building DAQ Hardware + Firmware for Wire Chamber Detector
We have 2 different board which has same SoC RK3566. We want to run this page Ubuntu image on this board. They all have same components. But Firefly image does not work on CM3 Board. So, we need help to understand what to do to make that ROC-RK3566-PC Ubuntu image work on CM3 Board. We have both PCB so we will try and release payment.
We want a core board design on altium, that works with Firefly Ubuntu image. Its pin will have eth, csi, usb 2.0, usb 3.0, PCIE. When design is finished we need to produce PCB and put components on board and see if the design works This is the exact board design that we want - And it needs to work with board firmware -
looking for expert firmware programmer/designer to work on new Power PD projects utilizing CY7111 EZ-PD PMG1-S1 kit as well as CY7113 EZ-PD PMG1-S3 PROTOTYPING KIT prior knowledge and work experience with this kit would greatly help
looking for expert firmware programmer/designer to work on new Power PD projects utilizing CY7111 EZ-PD PMG1-S1 kit as well as CY7113 EZ-PD PMG1-S3 PROTOTYPING KIT prior knowledge and work experience with this kit would greatly help project details provided upon request and proof of your past experience with cypress/ infineon development toolset
I am looking for a firmware engineer with experience in STM32F programming for W5500 Ethernet and Modbus tcp. and there are some functions for I/O.
LOQED, a Dutch startup-to-scaleup company (), has re...experience with remote software development, we are looking to expand our team abroad. We currently have a development team of four, and we plan to double this over the next few months, with many exciting new products and features on the roadmap. We are looking for a company (not an individual) able to supply experienced software developers for the following roles with long-term commitment: - Embedded Firmware (C) - Backend (PHP and Java) - Android (Kotlin) The company needs to be based in Europe. Developers have the possibility to visit our office in Amsterdam. We are not open to companies in Russia, Belarus or Ukraine because of the ongoing war and uncertainties this brings. For all details, please see the attached document...
1. Program A9G to send GPS data every 5-10 seconds to a MQTT broker with TLS 1.2. This involves creating and refreshing JWT. 2. Teach me how to program A9G board. Need help with setting it up in my computer to program and flash the above custom firmware into A9G board.
We have finalized the QMK Firmware for one of our products and we are looking to finish the last piece which is the RGB Mapping. A simple job that will require 1-2 hours at most if you are familiar with C/C++, QMK, and Circuit diagrams.
we would like to interface USB Keyboard to 8051 Microprocessor like AT89X52 or N79E352RADG, we already have our project up and running on a PS2 Keyboard, we are ready to change the Microprocessor but it has to be 8051. we need expert advice on which components to use from some one who has already done something like this. would like to start with hourly charges.
...will not be used for my project, as my project requires a 100% Rust solution. ************************ Test # 2 Repeat Test # 1, except test it using Windows 10 Notepad rather than Windows 11 notepad. ************************ Test # 3 Create a test that runs Windows 11 Calculator and shows that 8+9 = 17 using only the mouse (no keyboard !). Note, this test will require some sort of image recognition since automation of 8+9=17 is done via mouse rather than keyboard. An example of image recognition is shown below: The goal of Test # 3 is image recognition. So even if your code can figure out the correct mouse location without image recognition, Test # 3 still requires that mouse location for 8+9=17 be done via image recognition. The above
I have a Keyboard app for iOS that was rejected because it doesn't include the basic keyboard functionality. The app is a sticker app that lets you copy and paste emojis. However, the app is required to have "both" alphabet and numeric keyboards as well. Currently without "full access" enabled in keyboard settings, the app doesn't function. When "Full access" is not enabled, the app should still have the alphanumeric keyboard. I'll give a 10 rating for good work. Thanks
I have a Keyboard app for iOS that was rejected because it doesn't include the basic keyboard functionality. The app is a sticker app that lets you copy and paste emojis. However, the app is required to have "both" alphabet and numeric keyboards as well. Currently without "full access" enabled in keyboard settings, the app doesn't function. When "Full access" is not enabled, the app should still have the alphanumeric keyboard. I'll give a 10 rating for good work. Thanks
I have a PDF document, this file has been given to me by the insurance company so I print a contract & fill it out for each , I need an exactly the same document in WORD/EXCEL, but the important thing about this template is that the fields can be filled very easily filled in Word/Excel for each different client that we have to create the document. This document should...by the insurance company so I print a contract & fill it out for each , I need an exactly the same document in WORD/EXCEL, but the important thing about this template is that the fields can be filled very easily filled in Word/Excel for each different client that we have to create the document. This document should easily easily field (going from one field to another by tab on keyboard, etc etc)
I have a PDF document, this file has been given to me by the insurance company so I print a contract & fill it out for each , I need an exactly the same document in WORD/EXCEL, but the important thing about this template is that the fields can be filled very easily filled in Word/Excel for each different client that we have to create the document. This document should...by the insurance company so I print a contract & fill it out for each , I need an exactly the same document in WORD/EXCEL, but the important thing about this template is that the fields can be filled very easily filled in Word/Excel for each different client that we have to create the document. This document should easily easily field (going from one field to another by tab on keyboard, etc etc)
We are looking for an automation of the following: Barcodes that are being built from a text file, should be sent to a com port of a PC (we cannot access it in any other way), mimicked as a Honeywell USB scanner. Further implementations would be, after first barcode, wait for keyboard input. This should be able to be runned from a laptop.
hi everone this is not a small job i need a pcb firmware designer to design a pcb for obd2 icluded bluetooth wifi usbc etc i have all the requirement but i need someone who is competent and has done in the past something like this with can canfd flexray protocols etc pls dont waste time to require what and who if you dont have a clue what iam talking about thank you ps nda and ip will be required and payment is done after testing the pcb and firmware
I am trying to figure out a solution to send keys to a non focused unity window post message works for other windows (SDL) but does not work for unity PostMessage(wnd, WM_KEYDOWN, key, lparam); Im not sure of what input system it is using maybe directinput? I am looking for anyone that can help. SendInput works but is global and works on whatever is in focus so thats not what I am looking for. This is my github I am using for testing
I have figure out the hardware of BL...controller and its 100 percent ready to test. Now its time to develop control firmware. I have already develop a basic firmware on Arduino MEGA on which i have run a motor but i want to switch to STM32. I have basic overview of the whole firmware of bldc control. I have started working on STM32 from last one month and have basic bare metal programming idea. I want to make a industry standard product with MICRA C standards complins with all the feature required for e-bike using STM. I need some one who have good experience and expertise in motor control firmware using STM and have work with BLDC Control in past ( like advance timer of STM) to help me and provide a hourly based consultancy and guidance to complete me this ...
We want to develop a esp32 based smart device which will be able to pul data from a 3 phase multi functional meter with rs 485 / modbus enabled . Once the data is read from the energy meter , we need to publish that data over json as MQTT client to a MQTT raspberry pi as subscriber in a LAN or to a MQTT subscriber /server in remote cloud
Android box Firmware developer , you must have SDK and customize the operating system Please read carefully before responding- Our android Apk is already done. You must have SDK ( source code ) for ANY android box. We can work with android devices. as long as you have the source codes ( SDK) Hello there, We are a digital signage company using the android box to show content on tv. Our users connect to our back-end, choose their content, the content displays on the Tv box ( android box). Here is why we are reaching out to you: A lot of our clients are retail and restaurant owners. Their TVs are high on the wall, it's very hard for them to add the SSID /password with the android box and for many reasons such as Its too hard to reach, the remote doesn't work when the box is...
-Please read carefully before responding- Our android Apk is already done. You must have SDK ( source code ) for ANY android box. We can work with android devices. as long as you have the source codes ( SDK) Hello there, We are a digital signage company using the android box to show content on tv. Our users connect to our back-end, choose their content, the content displays on the Tv box ( android box). Here is why we are reaching out to you: A lot of our clients are retail and restaurant owners. Their TVs are high on the wall, it's very hard for them to add the SSID /password with the android box and for many reasons such as Its too hard to reach, the remote doesn't work when the box is behind the Tv. Our customers are frustrated. We need an android box expert that c...
I have a hardware 100% ready and need help in developing a firmware of closed loop speed control of bldc motor with all the necessary features required for e-bike application like forward-reverse ; e-brake, anti-theft, display etc. The firmware should be easily tunable to any motor easily. It should be standard and MISRA C compliant. We will discuss the complete requirement of firmware and testing parameters in meeting before finalizing the work. It should be a bare metal code. People who have done this in past those only contact.
We are looking for someone(several) who can modify a lightweight GUI library. It is written in C and you can use XML together with CSS to describe interface, structure and style. It originated from Linux but we wish to use this library together with FreeBSD. We have modified the code so that mouse, keyboard and multi-threading works under the BSD platform. But we wish to get help to successfully integrate the X11 part of the code to support FreeBSD. The code base has several other flaws but the short therm goal is to make the GUI library functional on BSD.
We are looking for someone(several) who can modify a lightweight GUI library. It is written in C and you can use XML together with CSS to describe interface, structure and style. It originated from Linux but we wish to use this library together with FreeBSD. We have modified the code so that mouse, keyboard and multi-threading works under the BSD platform. But we wish to get help to successfully integrate the X11 part of the code to support FreeBSD. The code base has several other flaws but the short therm goal is to make the GUI library functional on BSD.
The scope is to design a testbed utilizing the ESP32s3 chip (8MB RAM 32MB Flash version). Peripherals will be screen, 24 tik encoder, speaker/ buzzer, tactile switch. CAD is is attached along with component specs and data sheets. requirements for acceptance: design on Altium 19+ access to a FAB and components. Able to do their own debug and testing familiar with the ESP32 SOC family - E...scope is to design a testbed utilizing the ESP32s3 chip (8MB RAM 32MB Flash version). Peripherals will be screen, 24 tik encoder, speaker/ buzzer, tactile switch. CAD is is attached along with component specs and data sheets. requirements for acceptance: design on Altium 19+ access to a FAB and components. Able to do their own debug and testing familiar with the ESP32 SOC family - EE design and fir...
Need someone to add 2 pretty simple feature to our existing POS esp32 firmware. 1. Turn wifi strengt up to maximum strength. 2. Make the device restart when WIFI connection is lost for more than 120 seconds. Thats it, should be a relatively simple task for someone with esp32/ Arduino experience. Dont bid less to get the project, WHAT YOU BID IS WHAT YOU GET NO MORE!
I want to create a program were I create my own little solar system. I want to create a button or a key on my keyboard with which i can generate new planets.
I need a solution to update (via USB and windows10) the firmware and contents of an external flash of a STM32F469 based card. The external Flash is a "MT25QL512ABB8E12 64MB QSPI NOR-Flash" I can possibly provide the connection diagrams and other info.
We are looking for someone to test our app abroad. Our app is Design Keyboard, Weather Screen, and Talking Translator. You must have an Android phone, even better if you also have iOS. We are looking for someone to test a variety of devices. Things you will be doing. 1. Test our app 2. Localization 3. Market Research Feel free to contact me.
We're an Australian based startup developing a new IoT platform to support vulnerable people at home. We're looking to augment our existing firmware development team with a consultant for the next 2 to 3 months, with the potential for ongoing work if thing work for both you and us. This work will involve either: * Discreet scopes of work to be completed independently; * Working alongside our internal firmware development team, picking up cards best suited to your skillset. We're specifically looking for someone with: * Expertise in C/C++ development for embedded Linux systems and microcontrollers * Experience with TI Sitara processors (AM335x) and STM32 MCUs * A strong understanding of low-level Linux development (working with the kernel, device drivers, boot...
We need several renders by existing Sketchup files. We have 3 sketchup models - monitor stands (3 sizes). We need a product realistic images with monitor, accessories, keyboard, etc for each stand. Examples provided
Require firmware written for BLE module communicate with sensors. Board is complete. First first milestone: write firmware for testing board components; - Buzzer - Mcu advertise - LEDs - Button Once successful then quote completed tasks. Experienced Only! COMPONENTS Nordic BLE : Holyiot YJ-17095 CO CO2 Temperature Humidity
Hi Redouane, I noticed your profile and would like to offer you my project. Do you have time and knowledge to help us to port a smaller GUI library? It is written in C and allows you to use XML together with CSS to describe interface structure and style. It originated from Linux but we wish to use this library on FreeBSD. We have modified the code so that mice, keyboard and multi-threading works under the BSD platform. But the biggest problem is to implement support for displays.
For this project, you will be : - selecting the MCU for the HW schematic, - Writing the firmware for the project - clear code with commentaries- ( details will be provided in chat) - Managing I2C buses, RS485, and USB - Developing a PC interface to communicate data with the board - Select the OLED display according to the specs - Draw schematic section for the OLED, buttons, RS485, MCU, and programing circuit this project will require: - 55 analog measurements ( I2C external ADCs will probably be used - part numbers will be shared afterward) - 20 analog Setting values ( I2C external DAC will probably be used - part numbers will be shared afterward) - 10 analog values will be set through a digital potentiometer (I2C dual digital potentiometers - part numbers will be shared after...
Hi Ikbal, I am looking for an Android dev. First part is to develop a method to remove current Android OS from device, second part, a custom version of Android that will only boot from the device port. Android will only offer a browser like Chrome and only open the index page on the OS or the USB-C device, it will only use the keyboard function but it will not need any other Android features. Let me know if this is a project you have the skills to complete. Thank you, Howard
Description: stm32(transmitter)-->nRF24-->stm32(receiver)-->sim900-->Internet * Transmitter is in sleep mode and every hour wakes up and receives temperature from BME680 (The embedded RTC on stm32g071rb has to be used it) *Then, it sends via nRF24 the temperature and the time (in form Day/Month/Year/Hour/Minute) to the receiver and returns in sleep mode *The receiver is in sleep mode and when a package from the transmitter is received, it wakes up to receive it and then it sends the received temperature and time via sim900 on a website (.php) Deliverables: *2 codes (1 for transmitter and 1 for receiver) *Schematic for the modules * Verification with measurements (power consumption) that the sleep mode works Deadline: There isn’t any deadline
I need to modify the graphical interface of the firmware and change some HW parameters
More information on the project at: You can hit me up on LinkedIn as well:
Hello, i hope this message finds you well. i would like a simple 2D game developed in CodeBlocks - C - Mingw library. You are required to design and implement a computer game which is based on the javelin throw track and field event (see: ). As the player, you control the force and elevation with which the javel...was thrown whilst the thrower was still within the predetermined runway area – otherwise the throw is invalid; ● that the user can control: o the speed at which the thrower runs o the angle at which the javelin is thrown o when to release (throw) the javelin ● the game should keep a score of play over 6 throws; ● incorporating sound into the game; ● making use of both the mouse and keyboard to control the game
Looking for manufacturers who can develop a few different electronic products fully set up with firmware
Hi Niels T., I noticed your profile and would like to offer you my project. Do you have time and knowledge to help us to port a smaller GUI library? It is written in C to 100% and you can use XML together with CSS to describe interface structure and style. It originated from Linux but we wish to use this library together with FreeBSD. We have modified the code so that mice, keyboard and multi-threading works under the BSD platform. But the biggest problem is to implement support for displays.
Hi Ebubekir Talha K., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
Looking to hire a Keyboard Maestro expert to walk me through setting up some automation on Mac. I'm looking for someone who has advanced skills in it and can speak fluent English to give me a consultation on a call and email. Would be great if you could prove your competency somehow, e.g. if you have posted tutorial videos on YT then please share the links, or maybe you can show your customers feedback. Looking forward to meeting you. Best regards, Hendrik
...systems but mainly Windows. Functionalities: 1. Getting information about energy consumed by laptop/PC 2. Tracking data about mouse sensor movement - clicks/activity/distance covered with mouse sensor movement 3. Tracking data about keyboard activitity - number of letters and numbers inputed/which letters and numbers were inputed/time 4. Button start/stop and end work - when activated it should count working time. After clicking on ‘end work’ app should send report to server, 5. Real time data display – app should display gathered values about mouse/keyboard activity, 6. App should make screenshots in randomized time frames between 1-10 minutes (to avoid user knowing, whenscreenshot will take place), 7. Gathered data from points 1-6 app should send to se...
