Wireless sensor networks projects jobs
I need to develop a system to locate person on a l...te3chnology. The tag shall be very small in size (nRD52832 or similar ). The tg shall have accelerometer for fall detection, temperatures and humidity sensor and it shall be located using multiple receivers or base station installed on the field. the battery status shall be read., More details shall be given on chat. We need the hardware design of the tag, base station design, firmware and a test server program . Please big only if you have relevant experience on this field and be ready to showcase your experience when we chat. I will not read any generic bid messages for this project. Please write specific details of your experience in RTLS projects. Please start with the word "Symphony" to make sure you have ...
...navigation information, the road gradient based on the car navigation may differ from the actual road gradient. In such cases, the power source is switched at a point where the road gradient does not actually change, which may hinder fuel efficiency improvement. The driver may feel uncomfortable for this. 　To solve these problems, this technology detects the actual road gradient with a car-mounted sensor and performs control by considering both the information from the car navigation system and the actual road gradient. Basically, the power source is switched based on the road gradient information in the car navigation system. However, the power source is not switched in locations where the car navigation system indicates that the road gradient changes but the actual road gradien...
...solve this problem, in this technology, two laser radars are installed in such a way that the direction of detection is the same and the height at which they are mounted is different. The laser radar used in this technology are, for example, a flash LiDAR, a LiDAR of a type in which the irradiation direction of the beams is changed by a rotating mirror, and a directional radar such as a phased eye sensor, or the like. Please investigate this technology in this issue. <<NOTICE>> The target car brands in this search are limited to US, European, Chinese, and South Korean brands. <Requirements for Payment> ・Submit documentary evidence that clearly states the details of the subject product, the name of the company selling the product, and the company that plans to...
...images showing the location of projects on three separate custom map. Skills and experience required: - Proficiency in graphic design and map creation - Familiarity with custom map creation tools and software - Ability to accurately pinpoint locations using specific coordinates Project Requirements: - Use the provided exact coordinates to pinpoint 1-5 locations on the custom map - Create visually appealing images that clearly display the location of each project on the map - Ensure that the images accurately represent the geographical information provided Deliverables: - High-quality images showing the location of each project on the custom map - Images should be in a format suitable for digital and print use Please provide examples of previous map-related projects or...
I have a set of blueprints that require conversion into a detailed takeoff, including specific requirements: 1. Provide accurate square footage calculations for each room, along with detailed paint specifications. 2. Enumerate the number of doors, windows, and fixtures in each space, specifying the type of paint required for each. 3. Clearly outline any additional surfaces that need painting, indicating the quantity, preferred paint type, and color. This information will enable us to streamline the painting process efficiently and ensure precision in our execution. Project Summary Report: Interior Painting 1. Entrance Area Square Footage: 1090 sq ft Primer on all walls Paint: Ceiling: Flat, Color White Walls: Satin, Color Atrium White Hallway Square Footage: 679 sq ft Primer on all wal...
Hi Bassem here is your payment for November. Hope all is well, We must talk my friend.
Here you go Jhonny, please see PM boards for project details.
I am looking for a freelancer to help me create an affiliate network for digital products and services, as well as platform to communicate and manage future campaigns within the network. Skills and experience needed: - Experience in creating and managing affiliate networks - Knowledge of digital products and the affiliate marketing industry - Ability to recruit new affiliate partners and provide an ongoing method for future recruitment The main tasks for this project include: - Setting up the affiliate network platform (can be existing software) - Advise on Developing a commission structure based on fixed rates per sale - Assisting with the initial recruitment of new affiliate partners - Providing ongoing support and management of the affiliate network (to be discussed) If you ...
I am looking for a skilled deep learning expert to build a deep learning architecture model for my project. The ideal candidate should have experience in building Convolutional Neural Networks (CNN), Recurrent Neural Networks (RNN), and Deep Neural Networks (DNN). Intended Application: Tabular Data Skills and Experience: - Strong knowledge and experience in deep learning models such as CNN, RNN, and DNN - Proficiency in programming languages such as Python and frameworks like TensorFlow or PyTorch - Experience in working with tabular data and applying deep learning techniques for analysis - Ability to handle small datasets (less than 1000 samples) and optimize the model accordingly - Understanding of data preprocessing and feature engineering techniques for tabular d...
Design a Modern, Clean, and Kid-Friendly Logo for KinderBuilders Project Description: KinderBuilders is a new company that provides fun and educational DIY projects for children. We are looking for a logo that is: Modern and clean: Reflecting our contemporary brand approach. Kid-friendly: Appealing to young children and parents alike. Memorable and unique: Easily recognizable and standing out from the competition. Versatile: Adaptable for use on various platforms and materials. Target Audience: Parents of children aged 5-12 Children interested in DIY activities Creative individuals who appreciate modern design Desired Logo Style: We are open to various design styles, but we prefer logos that are: Simple and easy to understand: No complex or intricate elements. Colorful an...
I am looking for a skilled and experienced developer to w...Proficient in using pyspark and CNN - Intermediate understanding of convolutional neural networks - Familiarity with analyzing medical data - Experience in working with cancer-related datasets - Strong problem-solving skills and attention to detail The project requires the use of specific datasets, which I already have. However, any additional assistance in acquiring relevant datasets would be appreciated. The ideal candidate should have a good understanding of CNN and be able to apply it using pyspark. Experience in analyzing medical data and working with cancer-related datasets would be a plus. If you have the necessary skills and experience, please submit your proposal along with examples of similar projects yo...
I am looking for a freelancer to set up a UniFi network for my medium-sized area of 1000-5000 sq ft. The network will primarily connect other IoT devices. I require standard security features such as WPA/WPA2. Skills and experience needed: - Experience in setting up UniFi networks - Knowledge of IoT devices and their connectivity requirements - Proficiency in configuring security features such as WPA/WPA2
Hi, I'm looking for an expert who can share ideas to develop green projects, Sustainability at work place. I need an expert who can suggest for a solution : one of the tree root got into underground pipeline system - how to get rid of this? Welcome solutions from professional / Experienced experts. Thanks
I am looking for a skilled ThingsBoard developer to create an IoT dashboard that displays real-time trackin... Requirements: - Develop an IoT dashboard on the ThingsBoard platform - Configure the trackers to the platform - Ensure the dashboard updates data in real-time - Create geofencing to use with GPS trackers - Create multiple rules and alerts based on tracking data Skills and Experience: - Strong experience in developing IoT dashboards - Proficiency in using ThingsBoard platform - Knowledge of sensor data integration and real-time data updates - Experience in creating rule chains and alerts on ThingsBoard Deliverables: - Fully functional IoT dashboard that displays real-time tracker readings - Clean and well-documented code - Proper integration of the ThingsBoard/ThingSpeak...
I am looking for a mechatronic engineer to assist me with a specific task related to designing a robotic arm and programming a PLC. Requirements: - Experience in designing a robotic arm and programming a PLC - Knowledge of developing an automated control system - Familiarity with sensor technology related to diabetes - Ability to create a 3D design - Proficiency in connecting Arduino The project has specific requirements for the design and functionality of the mechatronic system. The timeline for the completion of the project is flexible, with a timeframe of more than 4 weeks.
...Arduino code to Raspberry Pi for sensor data collection and display. The Wemos board have not enough memory and speed to process the data fast and give a nice user friendly display. This is for an axle scale. I have working code and website on a Wemos D1 board. I have the files. The code must be transferred to a Raspberry PI 3+ and there must be alterations made to the website to be much more user friendly. How the setup work now: There is 3x Wemos D1 boards with an analogue input from a pressure sensor. There is 1x Wemos D1 board with a HX711 input. 1x Main Wemos D1board: the other 4x boards connect to this one through wifi. The website is on this board. Each of the 4 boards inputs is calibrated on the main board and calibrated sensor data i...
Project Title: Chatgpt Integration in Our Messaging Apps in Xamarin Forms Projects Description: We are seeking a skilled Xamarin Forms developer to integrate Chatgpt into our messaging apps. The ideal candidate will have experience in Xamarin Forms and API integration, with a strong understanding of Chatgpt. Key Requirements: - Integration of Chatgpt into our own messaging platform - Assistance in setting up the Chatgpt API if needed (client is unsure) - Implementation of other specific functionalities as requested by the client Ideal Skills and Experience: - Proficiency in Xamarin Forms development - Experience with API integration - Familiarity with Chatgpt or similar natural language processing technologies - Strong problem-solving and communication skills If you are a Xamari...
...required size of the PCB board is 60 x 100 mm. - here's the list of components you might need for the complete PCB project containing Arduino Nano 33, control of stepper motors, rain and temperature sensors, as well as control of a heater: Arduino Nano 33 Stepper Motors (Nema 23) - 2 pieces Stepper Motor Drivers (such as A4988, DRV8825, or TMC2208/TMC2209) - 2 pieces Rain Sensor (like FC-37) Temperature Sensor (e.g., DHT11, DHT22, or DS18B20) 12V, 100W Heater H-Bridge Drivers (for controlling motor direction and speed, such as L298N, L293D, DRV8825) Voltage Regulators (to regulate different voltages needed for various components) Resistors and Capacitors (for basic electrical connections and signal filtering) MOSFET or Relay for heater control Diodes (for ...
CHATGPT/GOOGLE BARD Prompts Writer for My Projects Proposals
Project Title: Fitness Startup Target Audience:any level Services offered: Personal Training I need to develop the thing which measure distance,speed and time I need a small device so I can attach it to a sport cone which combines motion sensor,timer,distance tracker,calculator and speed counter (it's not an app it should be a hardware(I dont really knows it terms but it is a device which I'll use in real life) it's great technology for running if any questions ask me below you can see the approximate look and need it's very easy to develop you just need to know basics - Note: This description assumes that branding and marketing assistance is not required, as the client skipped the question regarding this.
I am seeking a freelancer to develop a portable digital counter activated by a proximity sensor. The purpose of this counter is to count people. Key requirements: - The device should be battery-operated for portability. - The proximity sensor should have a range of less than 1 meter. - Counting range 0 to 9, with reset switch. - The counter should count 1 for every 2 activations of the sensor. - The digit size should be large like 15 mm high. - the device size should not be more than LxWxH: 70x40x6 mm Ideal skills and experience: - Experience in developing electronic devices and circuit design. - Knowledge of proximity switch technology and its integration with digital counters. If you have the necessary skills and experience, please submit your proposal with relev...
Visual Studio Projects/Exercises Overview: I am seeking a skilled programmer to create a series of Visual Studio projects/exercises. The projects/exercises should be written in C++ and have an intermediate level of complexity. Scope of Work: - Develop more than 7 projects/exercises in C++ using Visual Studio. - Each project/exercise should be designed to challenge and test the skills of intermediate-level programmers. - The projects/exercises should cover a range of topics and concepts, including but not limited to data structures, algorithms, object-oriented programming, and file handling. - The projects/exercises should be well-documented and include clear instructions and specifications. - The code should be well-structured, efficient, and fo...
I am looking for a PowerBI expert to assist me with my stock market data projects. The ideal candidate should have experience in data visualization and be able to create visually appealing charts and graphs to present the data effectively. I am especially interested in people who have experience with running charts and also if possible the IBCS standard. Tasks: - Data visualization: The main task will be to create visually stunning and interactive dashboards and reports using PowerBI. - Maintenance of reports and improvement of design for existing reports Design and Format: - The client has some ideas in mind for the visualization but is open to suggestions. The candidate should be able to collaborate with the client to bring their ideas to life. Stock Market Data: - The focus wi...
I am looking for a developer to create an Arduino compatible C++ library for the SPL17-002 pressure sensor. The library will have the following requirements: Functionality: The library must be a c++ class object library using the information provided in the SPL17-002 data sheet version 5.0 from Goer Micro. The library must accept the I2C instance and the interrupt pin on object creation. The library must return pressure and temperature as compensated double values. The library must have methods for the following functions: Software reset the chip. Set the operating modes - stand by, one shot, FIFO. Set the measurement data type(s) - Pressure only or pressure and temperature. Set the pressure data sample rate. Set the temperature sample ratio. Set the interrupt mode. Set the interru...
I am looking for a skilled freelancer who can optimize the speed of my website, thenarrowspace.com. The current loading time is less than 3 seconds, but I want t...Experience: - Experience in website speed optimization - Knowledge of techniques and tools to improve loading time - Familiarity with website performance analysis and optimization - Ability to identify and fix performance bottlenecks - Proficiency in HTML, CSS, and JavaScript to optimize code - Experience in optimizing images and other media files - Familiarity with caching and content delivery networks (CDNs) - Strong problem-solving skills and attention to detail If you have the skills and experience required for this project, please submit your proposal with relevant examples of your previous work in website speed opt...
...or digital products. Affiliate Network: - Moosend - I do have a rough idea of the type of network I would like to work with. I am open to suggestions and recommendations from the freelancer. Budget: - My budget for this project is under Rs 500. Ideal Skills and Experience: - Proven experience in affiliate marketing, particularly in promoting services. - Familiarity with various affiliate networks and their offerings. - Ability to effectively identify and target potential customers for the services being promoted. - Strong communication and negotiation skills to establish partnerships with potential affiliates. - Results-driven mindset with a focus on maximizing conversions and generating revenue. If you have the necessary skills and experience in affiliate marketing for ser...
I am looking for a full-time machine learning resource to join our team. The ideal candidate should have a minimum of 3 years of experience in machine learning and be able to work 8 hours every day. This is a permanent work-from-home position. Tasks: - Algorithm optimization and deployment Expertise: - Advanced...machine learning resource to join our team. The ideal candidate should have a minimum of 3 years of experience in machine learning and be able to work 8 hours every day. This is a permanent work-from-home position. Tasks: - Algorithm optimization and deployment Expertise: - Advanced level Skills and Experience: - Proficiency in machine learning algorithms and libraries, specifically in neural networks/deep learning, decision trees/random forests, and natural language p...
...Features: Yes, design improvements Ideal Skills and Experience: - Experience in website optimization and speed improvement - Proficiency in optimizing website performance, including reducing page load time and optimizing code - Knowledge of caching techniques and content delivery networks (CDNs) - Experience in optimizing media content loading, such as images and videos - Expertise in front-end development and design to enhance the website's visual appeal while improving speed Please provide examples of previous projects where you have successfully improved website speed and design. Please, optimize JavaScript files to eliminate render-blocking sources. Remove any unused CSS, and convert large media files to WebP format to reduce the overall weight on the website. ...
FOC based Motor Controller Voltage Range: 48-350V - The motor controller needs to be able to handle a voltage range of 48-350V with isolated and non isolated varient. Maximum Current Rating: Up to 500Amps - The motor controller should have a maximum current rating of up to 500Amps able to opereate with 2/3 hall current sensor. Control Interface: Analog, Digital, and CAN control - The motor controller should support analog, digital, and CAN control interfaces. -Need a GUI to set all motor and controller parameters. Ideal Skills and Experience: - Experience in designing and developing FOC-based motor controllers - Strong knowledge of power electronics and motor control systems - Proficiency in analog and digital control interfaces - Familiarity with CAN communication protocols - ...
I have a server VPS in linode with ubuntu + dockers+ magento2 Previously it was with a domain but now I change it to there where I have the message that the ssl installed is st...have a server VPS in linode with ubuntu + dockers+ magento2 Previously it was with a domain but now I change it to there where I have the message that the ssl installed is still from and that I need to make that change. I also need to have the email service with Gmail so as not to be banned or otherwise a better solution. Lastly, they can log in through social networks to enter my store, and carry out maintenance without harming a development at the checkout with respect to the addresses that exist in my country which is a department / province / district
share with me your portfolio and i will share the project details
I am looking for a skilled developer to create a home page for my wireless services website using WooCommerce and Elementor. Purpose: - The main purpose of the website is to sell products. Specific Elements and Features: - I would like the home page to have a slideshow of products, showcasing different wireless devices and accessories. - Additionally, I would like a contact form that allows visitors to easily get in touch with me for inquiries or support. - Lastly, I would like to include testimonials from satisfied customers to build trust and credibility. Ideal Skills and Experience: - Proficiency in WooCommerce and Elementor is a must. - Experience in designing and creating visually appealing home pages with engaging slideshows and contact forms. - Knowledge o...
I am looking for a freelancer who can assist me with IPTV restreaming. I specifically need help with restreaming live TV channels, Movies & TV Series from a specific source. Requirements: - Experienc...specific source. Requirements: - Experience with IPTV restreaming and knowledge of the necessary tools and technologies - Ability to work with the specific source provided - Capability to handle over 1000 channels for restreaming Skills and Experience: - Proficiency in IPTV restreaming and troubleshooting - Familiarity with various streaming protocols and codecs - Knowledge of content delivery networks (CDNs) and their integration with IPTV - Understanding of DRM (Digital Rights Management) for content protection If you have the required skills and experience, please submit ...
...Responsibilities: - Develop, implement, and optimize Meta Ads campaigns to achieve targeted objectives and maximize return on investment. - Leverage your expertise in Zomato and Swiggy marketing to design and execute campaigns for these platforms. - Conduct comprehensive keyword research and competitive analysis to refine ad strategies. - Create, manage, and optimize ad campaigns across various platforms and networks, including Meta Ads, Zomato, and Swiggy. - Monitor campaign performance, analyze data, and provide actionable insights to improve results. - Collaborate with the marketing team to align ad campaigns with overall marketing goals. - Stay updated on industry trends and best practices to enhance campaign effectiveness. - Generate regular reports to track and communicate...
Seeking assistance with application development of projects in both C# and VB.NET with or with out Sql server database. The ideal candidate should have experience in developing applications using these programming languages. The projects involve working with databases and may require bug fixes. ONLY INDIVIDUAL DEVELOPERS PLEASE.
...the offers we got 7. Sign the borrower on a term sheet approval once they chose a lender We are working with the Lending Wise software for document management and also their Market Place fo rlenders, through emails and phone calls between the clients and lenders We are also using WhatsApp to communicate with clients per loan You will work on getting new lender and quotes on: 1. All social networks -LinkedIn, Facebook, Messenger etc. 2. Phone calls and emails 3. Online web research on Google 4. Check online conventions 5. Lending Wise Market Place And more... You will then get the lender to sign an agreement with us and make sure we have an account manager with email and phone number so we can start sending him loan requests You will work per hour and also have a bonus per s...
Send me message firstly please to discuss the details. I am seeking an ethical hacker with expertise in web application security. The project entails both assessment and solution implementation. I am open to any programming languages and tools that the freelancer is proficient in. The ideal candidate should have a strong understanding of web application security and b...expertise in web application security. The project entails both assessment and solution implementation. I am open to any programming languages and tools that the freelancer is proficient in. The ideal candidate should have a strong understanding of web application security and be able to effectively identify vulnerabilities and provide solutions to mitigate risks. Experience in network security and wireless security ...
...it’s time our logo reflects our commitment to modernity and efficiency. What We Need: Our existing logo has served us well, but it's time for an update. We are looking for a logo that maintains a visual connection to our current design yet elevates our brand with a modern twist. Your design should encapsulate the essence of our service – unlocking cell phones for universal connectivity across networks and countries. Requirements: The new logo should be a natural evolution of the old one - not a completely different look. It must be modern, sleek, and professional. The font is free to choose. The design should include both an icon and text ("" or "UnlockRiver") The logo should fit with the color scheme of our newly designed website (screens...
I am looking for a freelancer who can help me create a Private Blog Network (PBN) using Easy Blog Networks and Wordpress. The PBN will be focused on a specific niche that I have in mind. The main goal of this project is to increase website traffic. I want to utilize the PBN to drive more traffic to my website and ultimately increase my online visibility. I am looking to include 6-10 sites in my PBN. These sites will be strategically chosen to target my desired audience and generate the most traffic possible. Ideal Skills and Experience: - Extensive knowledge and experience with Easy Blog Networks and Wordpress - Expertise in PBN creation and management - Familiarity with SEO strategies and techniques to increase website traffic - Ability to select and optimize sites within...
I am looking for a freelancer to help me design a circuit that can read an angle from a CJMCU-103 or similar sensor and display it as only one illuminated LED in a strip of 41 LED's. The circuit should have the following features: Sensor: MPU-6050 or similar angle sensor. Resolution: The desired resolution for the angle measurement should be adjustable via a trimpot. Alternatively if it is done using an arduino or something similar, we need the ability to set a resolution as our row of LED's will be along side a scale that shows the mm of tilt on the length of the device. LED's: A row of 41 individual LED's in Varying colours (green, yellow and red) Calibration: A second trimpot for adjusting the "zero point" once it is installed in t...
I am looking for a skilled freelancer who can build websites and logos for various projects. The ideal candidate should have experience in website development and graphic design. Website Type: - The client requires a website and/or a logo for social media marketing purposes. Design Preferences: - The client is open to suggestions and does not have a specific design or style in mind for the website and logo. Timeline: - The client needs the project to be completed as fast as possible. Skills and Experience: - Proficiency in website development and logo design. - Strong understanding of social media marketing. - Ability to work quickly and efficiently to meet tight deadlines.
I am looking for a skilled and experienced freelancer to assist me as a broker for freelance projects. Freelance Projects: - Writing and Editing Graphic Design Requirements: - No specific requirements, open to suggestions Number of Projects: - More than 3 Ideal Skills and Experience: bringing clients
I need a flyer AND a website banner for a Christmas sale. The banner size needs to be 1920px * 450px. Normal size for the flyer. My website is If you would like ...image with our contact information as well as a couple of options for our logo. I am also including the a sample flyer and banner from our Black Friday sale. I will need this in a fully layered PSD, PNG, JPG, PDF Looking for a fast turnaround please.
I am looking for a freelancer to develop an Autonomous Fire Sensor Testing machine. The machine will primarily focus on testing installed smoke detectors in the office space. The machine need to find it way on the floor to reach the sensor location. Then lift the testing sensor and test the fire sensor and record the reading. Email the final reading. Skills and Experience: - Experience in designing and building automated self driving vehicle in indoor area - Proficiency in programming and automation software -
I have MOTION SENSOR PIR AND THE SENSOR CAN BE WORKED ONLY WHEN SOMEONE WALKS BY , NEED ANDROID DEVELOPER WHO CAN WORK ON ANYDESK UNTIL PROJECT IS IN A STATE WHERE ANYDESK IS NO LONGER REQUIRED APP NEED TO BE IN JAVA NATIVE AND CAN WORK ON IOT PROJECTS WILL BE USEFUL IF YOU HAVE QUESTION LET ME KNOW OLD APP LINK username : ankit password: prasad
Project Description: I am looking for a freelancer who can create a WIFI URL link that will provide internet access to more than 100 users with standard security measures in place. Purpose of the WIFI URL lin...provide internet access to users. Expected user load on the WIFI link: - The WIFI link should be able to handle more than 100 users simultaneously. Security requirements for the WIFI link: - The WIFI link should have standard security measures in place to ensure the safety of the network and user data. Ideal skills and experience for the job: - Experience in creating and configuring WIFI networks - Proficiency in network security protocols - Knowledge of managing high user loads on a WIFI network - Familiarity with setting up and maintaining WIFI URL links for intern...
We are seeking experienced and proficient freelancers in the field of Stable Disffusion to join our team for various construction projects, primarily focusing on bridges. Skills and Experience Required: - Some knowledge and limited experience in the field of Stable Disffusion - Willingness to learn and adapt to new techniques and technologies Project Timeline: - The expected timeline for project completion is less than a month. If you have the necessary skills and experience, and are interested in working on challenging construction projects, please submit your proposal.
